UPENDRA SAVANI

E-mail: adhrzc@r.postjobfree.com Contact: Saudi:+966-*********

Al-Shamaliya-Al-khobar, Saudi Arabia

CORE COMPETENCIES

Has Master degree (M.E. Chemical- Computer Added Process Design) with 14 years’ experience in the field of FEED and Detail Engineering

Leading/Manage process team for engineering projects and its execution

Planning/Scheduling the project, Man-hours/Man-power distribution

Executing the project in scheduled time with available resources

Training Saudi Engineers/Junior Engineers to support Corporate responsibility

Coordination with other disciplines/Vendors/sub-contractors for process data/Engineering support

Worked on modification/brown field/green field projects

Worked with SABIC for plant related modification, plant trouble shooting for one month

Worked on Process plant commissioning, troubleshooting and execution for one year

Experience of process calculation, simulation, preparing engineering drawings/documents, HAZOP, SIL, Value engineering.

Site survey for bidding, technical query and study the project

Perform Technical Bid Review/Clarification and verify Vendor NMR’s as per client and project specification

Familiar with international codes like API, ASME, NFPA, NACE

Working experience with various Oil & Gas industries design codes and best practices like ARAMCO, SABIC.

Preparation of Operations Instruction Manual (OIM) for the project

Preparation of Scope of work, Technical Bid Specification, conceptual design, for Process package, Equipment’s, review client tender document

Preparation/Review/Updating of PFD,P&ID,UFD

Preparation of Process Datasheets and IPDS (Instrument Process Datasheet)

Process Simulation Using Excel Sheet and ASPEN HYSIS Ver. 8

Hydraulic Calculation and line sizing

Checking/Review Flow Assurance Report/Studies

Material Selection Diagram (MSD), Design Pressure and Design Temperature maps (DPDT)

Preparation of Cause & Effect Matrix

Worked on Modular Skid project for Gas Wells of Saudi Aramco Field

Participated HAZOP study and SIL Analysis

Sizing of Vents for storage Tanks as per API-2000

Sizing of control valves, PSV relief load calculations, PSV inlet & outlet line sizing

ACADEMIA

M.E. Chemical Engineering, Gujarat University, Ahmedabad, 2006

B.E. Chemical Engineering, Veer Narmad South Gujarat University, Surat,, 2004

EXPERIENCE

Nov’14 to Present SNC-LAVALIN Fayez Engineering, Saudi Arabia

Position: Process Engineer

Roles and responsibility

Preparation of deliverable list and man-hour scheduling

Site survey for bidding, technical query and study the project

Preparation of Scope of Work, Technical Bid Specification for Process package, Equipments, review client tender document

Co-ordination with all discipline

Review of vendor documents and other process engineering activities for Detail Engineering projects.

Preparation of Package for vendor item which include Scope of work, exclusion & inclusion supply scope for techno-commercial evaluation

Preparation/Review/Updating of PFD, P&ID, UFD

Hydraulic Calculation and line sizing

Preparation of Cause & Effect Matrix

Worked on Modular Skid project for Gas Wells of Saudi Aramco Field

Participated HAZOP study and SIL Analysis

Review and verify Vendor NMR’s as per client and project specification

Major Assignment

Maintain Potential Program for Gas Wells, Saudi Aramco

Preparation and Modification of PFD/P&ID’s

Site Survey for Gas Well to update PFD/P&ID’s

Co-ordination with other Disciplines

Participation in HAZOP study and close-out report preparation

Worked on Modular Skid project for Gas Wells of Saudi Aramco Field

Misc projects for Saudi Aramco

Participation in HAZOP study and close-out report preparation for juaymah Offshore Platform crude loading system

Worked on Abqaiq Restoration Project

Worked on 20” Pipeline Rehabilitation Project

Prepared Operations Instruction Manual (OIM) for Gas Lift Project.

Worked on PDR’s and EWO as required by Saudi Aramco

Khursaniyah Gas Increment (Detail Engineering for 500 MMSCFD gas production), Saudi Aramco

Review/Modification/Updation of PFD/P&ID’s

Co-ordination with other Disciplines

Participation in HAZOP study/SIL analysis and Review of close-out report.

Hydraulic Calculations and line sizing

Flow Assurance Report review for the project

Review and verify Vendor NMR’s as per client and project specification

Preparation of Operations Instruction Manual (OIM)

Sep’13 to Aug’14 Kentz Engineering International Co Ltd, Al-Khobar, Saudi Arabia

Position: Process Engineer

Responsibility

Involvement in Project planning and Scheduling Activities, man-hour estimation for various kinds of projects like Study projects, Basic and detail engineering

Preparation of proposal development for various project types -FEED, Detail Engineering etc

Review of vendor documents and other process engineering activities for FEED and EPC projects.

Preparation of Package for vendor item which include Scope of work, exclusion & inclusion supply scope for techno-commercial evaluation

Major Assignment

Vapor Recovery System FEED for QATAR PETROLEUM

Preparation of Process and Instrumentation Datasheets for inline equipments and instruments.

Hydraulic calculations using AFT-fathom

Line sizing and pressure drop calculations

SHARQ-One of the SABIC Affiliate- Al-Jubail, Saudi Arabia

Design Change Request (DCR) for various plants including polyethylene and ethylene glycol plants

Cooling tower capacity feasibility study report

Hydraulic calculations using AFT-fathom

Line sizing and pressure drop calculations

HAZOP Study for Al-Khafji Joint Operations, Al-Khafji

HAZOP revalidation which includes review and verification of design conditions, calculations check for various issues like relief load, Hydraulic calculation review along with PDPT and MSD to verify pipe class and flange ratings, control valve capacity check, NACE Compliance, HAZOP study done by using software HAZOP MANAGER for following units

Desalination Unit

Desalter Unit

Gas Compression and Production unit

HOUT unit (Sour Gas Processing)

Water Treatment Unit

Crude Inlet Separation Unit

GOSP

Jul’11 to Aug’13 SNC-LAVALIN Engineering India Pvt Ltd, Baroda, Gujarat

Position: Process Engineer

Roles and responsibility

Preparation of deliverable list and man-hour scheduling

Site survey for bidding, technical query and study the project

Co-ordination with all discipline

Preparation of Scope of work, Design Basis Scoping papers

Review of vendor documents and other process engineering activities for detail Engineering projects.

Preparation of Package for vendor item which include Scope of work, exclusion & inclusion supply scope for techno-commercial evaluation

OPAL (ONGC Petro Additions Limited), Dahej, Gujarat

Detail Engineering work for OPAL (ONGC Petro Additions Limited), joint venture between Indian reputed Oil & Gas sectors. Project scope included Utilities and Offsite for entire petrochemical complex, compression and chilling package for C2, C3, C4 storage and transportation of Benzene, Toluene and Xylene

Updating of P&ID for Utility and Offsite

Hydraulic Calculations for various hydrocarbon pumps & Compressors

Prepared Design basis

Prepared the steady state simulation in HYSIS

Prepared property data basis to perform calculation for pump, compressor and PSV

Equipment sizing, control valve sizing

Preparation of sized equipment list, line list

Preparation of cause and effect matrix, Control narratives

Preparation of inline instrument datasheet, equipment data sheet, pump data sheet, exchanger datasheet, PSV data sheet

Hindalco Industries Limited (A Birla Copper Unit), Dahej Gujarat

Detail Engineering work for various packages by Licensor PRAYON TECHNOLOGIES which include 4 Chamber RCC Reactor and Digestion Tanks with prayon agitators, Gypsum Belt Filter, Low Level Flash Cooler, Phosphoric Acid Settler (28-32%), Fluorine Recovery System, Gas Scrubber, Phosphoric acid Concentration (46-54%), Phosphate Rock Ball Mill with dust abatement system, Phosphate Rock Conveyor & Vacuum System.

Prepared deviation list from BEP/FEED packages for detail engineering work execution

Developed PFD and P&ID from basis of BEP/FEED package

Heat and Mass balance verifications and prepared deviation list per requirement

Review and modify Material Selection Diagram (MSD) and PDPT provided in BEP/FEED package as a challenging task

Hydraulic calculation for lines, pumps which face suspended solid as a major challenge per project specification

Prepared various report which includes detailed process descriptions for reaction and Fluorine recovery package

Cause and effect matrix for DCS and ESD logic

Write-up for Control narratives, Cause and Effect Matrix for process units

Modification in various loops/logic for various BPCS and SIS component

Involved to determine and modified various ESD logics

Equipment sizing and prepared sizing basis and datasheet

Inline instrument datasheet preparation

Hazardous Area Classification as per NFPA 497

May’10 to Jul’11 Mott-Mac Donald Engineering India Pvt Ltd, Ahmedabad, Gujarat

Position: Process Engineer

Roles and responsibility

Preparation of deliverable list and man-hour scheduling

Co-ordination with all discipline

Preparation of Scope of work, Design Basis Scoping papers

Review of vendor documents and other process engineering activities for detail Engineering projects.

Preparation of Package for vendor item which include Scope of work, exclusion & inclusion supply scope for techno-commercial evaluation

Major Assignment

Edible oil refinery, Adani-Wilmar (JV), Mundra, Gujarat

Packages: Hydrogen generation Package by Linde india, Cooling Tower Package, tank farm for edible oil cuts storage, water treatment package,

Deliverables: Design Basis, Utility summary preparation, Hydraulic, NPSH and line sizing calculations, PFD’s, P&ID’s preparation, IPDS preparation, tanks and pumps datasheet preparations, cause and effect diagram preparation, interlock summary preparation, vendor evaluation,

Liquid Terminal Facility for storage, transportation & handling of Petrochemicals, “Adani-Hazira (JV)”, Surat, Gujarat

Packages: Hot Oil Generator, Chiller, Water Treatment plant, nitrogen generation and Instrument air generation packages.

Deliverables: Design Basis, Tanks and pumps datasheet preparations, Hydraulic, NPSH and line sizing calculations, PFD’s, P&ID’s preparation, IPDS preparation,, cause and effect diagram preparation, interlock summary preparation, vendor evaluation, Utility summary preparation, vent sizing as per API 2000 and Fire Water and Foam demand calculations as per NFPA and OISD

Other project handled:

-Chemical Plant for “Fine Chemicals, Atul Industries”, ankleshwar

-Pharmaceutical Plant for “Critical Ailment Drug, Intas Pharma”, ahmedabad

-Utility sizing and distribution for “Chiripal Group, BOPP Film Plant”, ahmedabad

-Utility Sizing and distribution for “Jindal BOPET Film Plant”, nasik

Nov’08 to Apr’10 Arcoy Biorefinery Pvt Ltd, Panoli, Gujarat

Position: Project Engineer

Project Cost: INR 100 crore

Plant Capacity: 12000 TPA Furfural Production

Review and approval of PFD & PID, G.A. Drawings, Layouts, Equipment’s Specifications, Tender specifications. Floating of inquiries for various package systems and technical evaluation of vendors bid. Part of technical and commercial evaluation to finalize the vendor.

Follow-up with vendors of various packages like Boiler, Turbine, Water treatment Plant, PRDS systems, ESP, Distillation Plant, Cooling Tower, Nitrogen Plant, Compressor, Vacuum system, Scrubbing System and Pumps.

Inspecting equipment’s and vessels at vendors shop and preparation of inspection report. Preparation of Site Reports and co-ordination with various departments like civil, electrical, instrumentation and mechanical. Communicating with consultant on various aspects of Plant.

Errection and commissioning Supervision of Furfural Plant and various packages like Boiler, Turbine, Water treatment Plant, PRDS systems, ESP, Distillation Plant, Cooling Tower, Nitrogen Plant, Compressor, Vacuum system, Scrubbing System and Pumps.

Prepared Screen, operation philosophy and logic for DCS of Furfural Production Plant.

Sep’07 to Nov’08 Pharmalab Engineering Pvt Ltd, Ahmedabad, Gujarat

Worked as Design Engineer with Pharmalab (Currently Pharmatech). Company is involved in Turnkey projects of Pharmaceutical equipments, Ointment Plants and Liquid oral plants.

Sep’06 to May’07 Chemprocess Systems Pvt Ltd, Ahmedabad, Gujarat

Worked as Project & Design Engineer with Chemprocess Systems. Company is involved in Turnkey projects of Multi-effect Evaporators and Vacuum systems.

Personal Details

Name : Upendra Savani

Date of Birth : July 26th, 1981

Qualification : Masters of Chemical Engineering

Position Applied For : Senior Process Engineer

Current Organization : SNC-Lavalin Fayez Engg., Saudi Arabia

Current Designation : Process Engineer

Reporting To : Core Lead Engineer

Other Benefits : Bonus +Medical+ Yearly Service award

Notice Period : 30 Days or Depends on Condition

DECLARATION

I declare that the above furnished details are true to the best of my knowledge and belief.

Upendra Savani

Contact this candidate