Sean P. O'Rourke

** ***** **** *******, *** York 11357

631-***-****

adhnms@r.postjobfree.com

Work Experience:

Assistant Project Manager

Jacobs Engineering:SUCF Project 13D63: Rehabilitation of Student Union, Stony Brook NY February 2017 thru Present

The scope of the project includes demolition, which includes the total removal of all elements down to the existing poured-in-place waffle slab concrete structure and construction for the rehabilitation of the complete existing Student Union 168,886 GSF Building. The project will involve a complete interior renovation and rehab of the building envelope, including, but not limited to structural modification, new mechanical, electrical, plumbing, fire protection and elevator systems. The project will be a LEED Silver Certified building. My primary duties

● Act as University’s Liaison between Project Consultant and all Contractor’s for the project

● Provide administration, coordination monitoring and inspection of all the work of the Contractors for the Project to final completion and acceptance by owner. Oversee and coordinate commissioning of building systems by Contractor and Project Consultant.

● Inspect all material and equipment prior to installation for conformance with contract documents

● Determine the need for and the amount of testing laboratory services required or desired. Coordinate review and monitor the performance and findings of such services. Provide Consultant reports and results of testing.

● Promptly advise contractor of any work, material, equipment deficiencies and request corrective action on their part. Maintain a log of such deficiencies dates of observations and remediation.

● Receive, investigate and monitor the reply to all written communications from the Contractor

● Prepare, develope, maintain, distribue all safeguard all inclusive onsite record systems for Project

● Schedule and conduct job progress meetings to discuss procedures, progress, problems and scheduling to establish status and accountability necessary for timely action for each item

● Construction schedule Analysis; Evaluate contractor’s schedule to understand the proposed logic and duration of the elements of work. Review for conformance with scope required in contract documents. Review if schedule shows order, interdependence and sequence of activities is logical and reasonable

● Receive Contractor’s monthly payment application, review for completeness and accuracy, provide recommendation to consultant

● Review change proposals for the contractor for cost reasonableness, validity and completeness. Provide recommendation to consultant

● Manage the collection, inventory and delivery of all contractually required “ turnover items including but not limited to submittals, warranties, sample materials, keys, spare parts. etc.

● Coordinate submission of Operation and Maintenance Manuals and the required training including videotape training sessions with a copy of the tape provided to the campus

● Coordinate the submission of As-Built Drawings(hard copy and electronic) Review as builts for completeness and accuracy

Project Superintendent

Jacobs Engineering, Toll Drive Stony Brook University, Stony Brook New York July 2014 to February 2017

Phase 1 of the program includes a 5-story Dining Center and Residence Halls. The Dining Center is 65,000SF with 950 seats, and the West Residence Halls is 118,000SF with 302 beds. Phase II of Program includes The proposed project consists of a new building containing 457 resident hall beds. Construction classification is Type 1B andOccupancy type is R2 My primary duites:

● Inspect all material and equipment prior to installation for conformance with contract documents

● Determine the need for and the amount of testing laboratory services required or desired. Coordinate review and monitor the performance and findings of such services. Provide Consultant reports and results of testing.

● Promptly advise contractor of any work, material, equipment deficiencies and request corrective action on their part. Maintain a log of such deficiencies dates of observations and remediation.

● Prepare, develope, maintain, distribue all safeguard all inclusive onsite record systems for Project

● Manage the collection, inventory and delivery of all contractually required “ turnover items including but not limited to submittals, warranties, sample materials, keys, spare parts. etc.

● Coordinate submission of Operation and Maintenance Manuals and the required training including videotape training sessions with a copy of the tape provided to the campus

● Coordinate the submission of As-Built Drawings(hard copy and electronic) Review as builts for completeness and accuracy

HVAC Inspector

CSM Engineering, Croton Water Treatment Plant, Bronx, NY August 2013 to June 2014

● Monitoring and operating HVAC Equipment that have been turned over for use by NYCDEP for Plant Operation

● Identification and reporting of defective work using NYCDEP Standard Operating Procedures

● Use contract specifications and drawings along with controlled inspection checklists to observe the work and record critical details of the particular phase of the construction

● Inspecting the construction contractor’s work for quality and compliance with approved shop drawings, catalog cuts, materials certifications and samples, and applicable codes and standards

● Preparing detailed daily inspection reports of all project related activities. Lead Construction Inspector

CSM Engineering, Hillview Reservoir - Yonkers, NY

April 2011 to July 2013

● As owner’s representative, use contract specifications, drawings, shop drawings, catalog cuts materials certifications, and controlled inspection checklists to observe the work and record critical details of the particular phase of the construction for quality and compliance with applicable codes and standards

● Supervise the assigned special inspections.

● Examination of delivered equipment for compliance with New York City Local Law 77 Standards

● Obtaining Material Safety Data Sheets for all chemicals delivered to the project

● Identification and reporting of defective work using NYCDEP Standard Operating Procedures

● Supervision and/or performance of field-testing of construction materials and construction operations

● Directing and supervising the sampling of construction materials for laboratory test results.

● Supervise the weekly inspection and repairs for compliance with a New York State Department of Environmental Conservation Site Specific Storm Water Pollution Protection Plan (SWPPP)

● Provide a Site Specific Emergency Action Plan Training to all new site employees and visitors

● Assist the Resident Engineer in preparing RFCs to the designer when conflicts arise during daily activities

● Preparing detailed daily inspection reports of all project related activities. Construction Inspector

CSM Engineering, Croton Water Treatment Plant - Bronx, NY May 2006 to April 2011

● Use contract specifications and drawings along with controlled inspection checklists to observe the work and record critical details of the particular phase of the construction

● Inspecting the construction contractor’s work for quality and compliance with approved shop drawings, catalog cuts, materials certifications and samples, and applicable codes and standards

● Identification and reporting of defective work using NYCDEP Standard Operating Procedures

● Supervision and/or performance of field-testing of construction materials and construction operations

● Prepare spreadsheets to record the depth and location of DWIDAG anchors bolts used as rock support to during rock excavation

● Prepare spreadsheets to record proper calibration of hydraulic jacks and the proper tensioning of DWIDAG anchor bolts during rock excavation

● Prepare spreadsheets to record depths and locations of boring holes use for surface grouting of voids above TBM Tunnel, record pressures and amounts of grout used during surface grouting operation.

● Preparing detailed daily inspection reports of all project related activities. Scheduler\Superintendent

EN-Tech Corp - Brooklyn, NY

July 2003 to January 2006

● Survey job conditions and assist ownership with scheduling and general supervision of work crews performing the following operations: reconstruction/ rehabilitation of sewers and manholes using gunite or cured in place lining methods, cleaning and closed circuit television inspection of sewers.

● Coordinate with clients to acquire necessary permits, schedule inspections and assure job is completed with quality and in compliance with applicable codes and standards

● Coordinate with superintendents: assign necessary personnel, equipment and materials to complete projects

● Review superintendent’s daily reports to track production, payroll and potential problems preventing job completion

● Submit weekly payroll and production reports to office administration for billing Construction Inspector

KJM Engineering, Westchester County, New York

July 2001 to July 2003

● As owner’s representative, use contract specifications and drawings to observe the work and record critical details of the particular phase of the construction

● Inspecting the construction contractor’s work for quality and compliance with approved shop drawings, catalog cuts, materials certifications and samples, and applicable codes and standards

● Preparing detailed daily inspection reports of all project related activities. Project Manager

JMA Concrete/Manhattan Gunite - Brooklyn, NY

August 1993 to July 2001

● Assist Owner in the preparation of cost proposals

● Prepare and submit all necessary shop drawings, time extensions, subcontractor approval forms and change orders requests in order to start and complete projects in timely manner.

● Attend project progress meetings, coordinate inspections between owner’s representatives and our field superintendents to assure work is quality and in compliance with contract specifications, quantities for billing information are accurate

● Act as liaison between field work force and office administration: order necessary materials and equipment to complete work, and track payroll

Skills

NYCDEP BEDC EHS Standards Training

10 Hr OSHA Training in Construction Safety and Health NYCDEC endorsed 4 Hr Erosion and Sediment Control Training Underground Tunnel Safety Course

8 Hr Confined Space Entry Training

HazCom 29 CFR 1910.1200

Hotwork PAI – 29 OSHA 1910 subpart Q and 1926 subpart J NYCDOB 4 Hr Supported Scaffold User

Education

Bachelors in Mathematics

Manhattan College - Bronx, NY, 1987 to 1992

Contact this candidate