Moc Pham

**** ******* ****** ***

Baton Rouge, LA 70810

225-***-****

adhkva@r.postjobfree.com

Summary of Skills

Sr. Electrical & Instrumentation Engineer/Project Engineer manager with over twenty-five years of E&I engineering. Have experience over of sight management for multiple projects regarding instrumentation, as well as low voltage and high voltage distribution.

Power distribution, the work is inclusive of installing and replacement of switchgear, transformers in refinery, chemical, pulp and paper industries. This experience also includes in-house engineering and working with engineering consultants in all aspects of the projects – field survey, cost estimating, scheduling, and budgeting, scope development for funding, specification, detailed design and engineering calculations, coordination, QA/QC reviews.

Instrumentation, the work includes single loop to a complete system. Working from conception to commissioning for installation of power, instrumentation, control system and many other disciplines.

Excellent team builder and self-motivated professional, capable of working independently or as part of a team with extreme focus and emphasis on personal and team safety.

Strong focus on project goal to meet stated objectives at the lowest possible cost on schedule while maintaining an excellent safety record.

Professional Experience:

2/2019 – 7/2020 – Hargrove – worked in plant

+ BASF (Geismar, LA) - Sr. Electrical & Instrumentation Engineer

Work with BASF Engineers and team members to overlook consultant engineering designs for large capital projects.

Work with in-house E&I designers, production, maintenance, and man rep. on small capital and work order projects for all business units.

10/2017 - 2/2019 – Sigma Engineering – worked in plant and got direct hire from Noranda

+ Noranda (Gramercy, LA) - Sr. Electrical & Instrumentation Engineer

Working with Noranda Engineers to overlook consultant engineering designs for two major expansion capital projects and handle small capital projects\

Supporting Maintenance to keep Production preventing down time - Replace the existing DCS control using Foxboro Spec 200 with a new Allen Bradley ControlLogic and FactoryTalk View HMI.

8/2016 – 9/2017 – Burrow Global LLC

+ ExxonMobil Refinery (Baton Rouge, LA) - Sr. Instrument & Electrical Engineer

Working to replace an obsolete Texas Instruments tank monitoring system with a modern tank Profibus monitor system for the Baton Rouge Refinery Tank Field.

4/2015 – 7/2016 – CB&I Engineering, Construction and Maintenance Oil & Gas

+ LNG (Freeport, TX) - Principal Electrical Engineer

Worked with Chiyoda and Zachary Construction on the electrical portion of the 3-4billion dollar project to build/retrofit the existing facility two LNG Liquefaction trains on Quinta Island, Freeport, TX. The objection of the project is to produce 1.9 Bcf/d of feed gas (2.0 plus Bcf/day gas process) sourced from the domestic pipeline transmission system.

2/2012 – 4/2015 – Jacobs Engineering/H&K Engineering

+ ExxonMobil (Beaumont, TX) - Electrical Engineer Lead

Worked with ExxonMobil and Jacobs engineers to build/retrofit the Crude A Unit and Treater 3 for improving production. The work involves managing time, budget, schedule for the electrical group to provide electrical design for IFC packages.

+ ExxonMobil (Baton Rouge, LA) - Sr. Electrical Engineer

Worked with ExxonMobil and Jacobs engineers on the Eagle Project to retrofit and expand the old unit to produce a new oil product. The work involved electrical design and purchase equipment, along with supporting instrumentations and other disciplines.

+ Mosaic Inc (in plant at Faustina, LA) - Sr. E&I Project Engineer

Worked with multiple projects to handle the E&I portion of the projects including working with Maintenance and Production to upgrade/replace 480V, 2400V, 13.8KV, & 34KV power system along with DCS.

6/2011 – 2/2012 – Engineer & Constructors International, Inc.

+ Ormet Inc (in plant at Burnside, LA) - Sr. E&I Staff Engineer

Worked with multiple projects to handle projects including working with Maintenance and Production to bring the plant from an idle (since 2005) to fully production. Project includes electrical, instrumentation, Delta V conversion, fiber optic, and communication. Converting the 60&70 technology DCS system to the most up-to-date process control with AB and Delta V.

11/2007 – 5/2011 - H&K Engineering

+ Mosaic Inc (in plant at Uncle Sam, LA) - Sr. E&I Project Engineer

Worked with multiple projects to handle the E&I portion of the projects including working with Maintenance and Production to improve the reliability of instrumentation for boilers and electrical reliability improvements. Installed the wireless network which provides central control and access throughout the plant.

+ Rubicon LLC (in plant at Geismar, LA) - Sr. E&I Project Engineer

Provided 60% technical and 40% administrative support for over thirty projects in various stages and sizes of engineering and construction. The work included providing preliminary engineering analyses and preparation of conceptual studies including return on investment. Provided cost estimate for small projects and oversaw large projects design by working with consultant engineering firm to develop cost estimate and design, construction for instrument/ electrical, some included piping, mechanical, and structural disciplines as well. Prepared and submitted appropriate funding documentation. Managed capital projects from concept through commissioning.

Implemented power system study to provide coordination for sequencing fuse tripping and circuit breakers during system faults; Complied with Arc flash study for electrical switch gears. This effort involved replacing existing transformers with a higher impedance transformer; switchgears and MCC with higher bus rating. Used E-Tap to check power system and power coordination for entire plant.

Worked with Maintenance and Production to resolve problems with nuclear/radar/DP level gauges and flow problems. Revised PLC/logic relay on hot oil heater system to comply with NFPA. Worked with Maintenance to solve the plant wide alarm system problems by using the wireless technology with license frequency and integrating with phone system to broadcast prerecorded messages, PA, and siren throughout the plant in case of emergency.

8/2006 – 11/2007: FORD BACON & DAVIS, Baton Rouge, and LA

Electrical Specialist: Worked on Shell oil and refinery task force projects.

Worked on specifications for medium voltage motor starters and provided electrical estimate for load center. Specified and designed the configuration for Shell security camera system in three Shell Refinery Plants.

7/1990 - 8/2006: GEORGIA-PACIFIC CORPORATION, Zachary, and LA

Electrical Project Engineer Manager: Managed projects and provided E&I support for the Port Hudson Mill.

Resolved problems with conveyor systems for fine paper, towel, and tissue machines to accommodate new demand by increasing production through PLC (Allen Bradley/Modicon/G&L/Siemen PLC). Developed cost estimate and submitted funding request and followed up from start to complete many projects which included new conveyor system line up from roll finishing to the final product. This work covered structural, mechanical, electrical, and automation; Worked with production technical assistants, vendor technicians and engineering consultants to start-up the conveyor line. Involved with many projects which included installing frequency drives for level control and for wood crane operations in the wood yard, pumps ranging from less than 1GPM to 2500 GPM, conveyors ranging from single to multiple line, starters from 120V to 2400 V, MCCs for system range from 120Volt to 2400V, 13.8V breaker feeders and power corrections. Worked with Maintenance to address instrument problems throughout the plant from nuclear level gauges through DP cells. Addressed and solved many flow problems in the bleach plant, boiler areas. Installed the first mill wide alarm system using wireless technology and integrating with the Gaitronic for the mill wide alarm system. Handled projects to replace water wells and drilling new wells to provide 100% water supply for the mill.

Provided weekend duty by managing union team members as E/I supervisors to address any problems. Provided shutdown coverage during mill outage and rebuilt digesters, boilers, and turbine generator.

5/1987– 6/1990: Mead Corporation Headquarters/ in plants (Ohio / Michigan)

Coop student: Worked with Mead engineers and E&I contract designers on AutoCAD to develop electrical and instrument standard digital tablets, specifications guidelines on power reliability and small projects develop instrument loop drawings

Professional Licenses & Affiliations

Member of ISA and IEEE – Used to hold a VP position for ISA Baton Rouge Chapter

LA Notary Public

American Amateur Radio License with call sign KD50ZN

Have current TWIC card and Public Trust security

Achievements:

Basic US Boot Camp 1986 and Advanced US Army ROTC Officer Military Training, 1989

Technical: Gaitronic System Technician Certified, 1999

Dale Carnegie Training, 2004 with an outstanding BEST DARN TEAM award

Leadership Training for Manager Certification with Dale Carnegie, 2006

ETAP – Power system analysis certification – August 2009

AutoCad, Modicon PLC, Allen Bradley, Access, Steeple Chase, Microsoft Excel, Access, and Word

First degree black belt in Shotokan Karate - 2013

Education:

University of Dayton, Dayton, Ohio - Bachelor of Science in Engineering, BSEE, 1990

St. Joseph Seminary College - PSR Religious Theology Certification, 2002

Active teaching Sunday Schools for St. Jude and St. Anthony Church since 1990

Currently studying to become a Catholic Deacon – expect to complete by 2025

Contact this candidate