EDMOND HIDI

***-**** ********* **. ****

Mississauga, ON L5E 3E2

Tel: 416-***-**** Cell: 647-***-****

E-mail: adhk0o@r.postjobfree.com

OBJECTIVE

Piping/Mechanical designer, Mississauga, ON.

Years of Experience in 3D modeling plant layout, piping design and construction and field installation. Experienced as CAD Drafter with solid knowledge of the practical application of engineering science and technology and proven ability to manage multiple projects and meet critical deadlines.

SUMMARY OF QUALIFICATIONS

Experience in interacting with customers, suppliers and multidisciplinary project teams

Familiar with ASME, API, and NFPA in Oil Ind., Mining and Nuclear Ind., Codes and Standards

oWork on complex piping projects including development, maintenance, research and installation.

oCreation of piping engineering drawings and 3D modelling.

o3D modelling for Equipment, Piping, Support Structures, Electrical Cable Trays and conduits routing. Coordinate the 3D laser scanning activities and incorporating point cloud data into 3D models for clash detection, interferences, etc.

oTraining and mentorship of more junior Designers, if applicable. Perform field visits to collect measurements and field data.

oPrepare Engineering Work Packages (EWOs), Bills of Material (BOMs). Scopes of Work (SOWs), Scopes of Services (SOSs) for complex projects.

oCoordinate the overall planning of the detailing approach and work with engineers to define and re-define the scope of work for complex projects.

oMonitor and inspect construction operations to ensure compliance to engineering design, site standards, and specifications.

oReview and approve vendor equipment approval drawings. Incorporate in design.

oIntegrate vendor equipment drawings into 3D models and 2D drawings.

oWork in a team environment and alert Project Engineers as to any layout issues that may exist in a drawing.

oKnowledge of ASME, API, NFPA, OSHA standards.

oPrepare drawings utilized for tender documents which range from mechanical or electrical equipment installations to custom equipment. Assist in the preparation of bid packages for construction and installation contractors.

oAbility to provide innovative ideas in areas of piping design, as well as installation methods and per company procedures.

oAble to create drawings using existing documentation, sketches made from actual measurements, and electronic scanned field data, strong drawing comprehension skills.

oAbility to interact and experience with process, mechanical, electrical and civil engineers.

oReviews and checks calculations, design models, drawings and design documents prepared by other piping designers in the group and by material suppliers, as assigned.

oExperience in equipment layout.

oExperience with structural steel.

oUnderstand and interpret process flow diagrams and piping & instrument diagrams.

oStrong interpersonal, personal solving, communication and organization skills, fast learning person.

oExperience in working with small to large scale projects.

oExperience working on multi-discipline projects.

oProvide cross functional technical support in areas of piping design.

oProactive, flexible, motivated and committed for continuous improvement

oProficient in computer skills like Platform Project Wise, Intelligent PI@D, PDS-MIROSTATION V8i 3D & 2D, AUTOCAD 2012 & 2018, AUTOCAD PLANT 3D, AUTOPLANT 3D V8i-2015, CADWORX 3D, Laser Scan and Point Cloud, NAVISWORKS 2015, ACAD RASTER DESIGN 2015, AND SMARTPLANT 3D & 2D, SolidWork

o

EXPERIENCE

Senior Piping Designer - Independent consultant

AECOM – Ontario July.2020- Continuing

Preparation of packages and preparing Bid drawings

Senior Piping Designer – (Maintenance Group)

TWD Empowering Ltd – Nanticoke, IOL Imperial – Ontario July.2017- May 2020

Piping/Mechanical Designer/Drafter creating production isometrics for piping and instrument diagrams, process flow diagrams, and equipment arrangement and equipment assembly drawings for different units of the refinery.

Piping design and drafting support for maintenance, shutdown and turn-around activities at the Imperial Oil Refinery. Prepares process and utility piping isometric drawings of various piping systems in the refinery, including steam plant, water treatment plant, fluid catalytic cracking unit (FCCU), sulfur recovery unit (SRU), and catalytic reforming unit (CRU), and alkylation unit. Implement and utilize various Imperial Oil engineering guides and global practices related to piping design, maintenance, and safety.

Ability to read and fix and create P&ID-s and familiar with process design philosophies

Designing and installation of equipment access and maintenance requirements (e.g. steam turbines, vessels, pumps, compressors, heat exchangers)

Designing of piping design practices on pipe racks and equipment layout.

Experience with structural design and drafting.

Applying ASME B31.1 & ASME B31.3 code in mechanical detail piping design, isometric and optometric GA Layout.

Following the piping design from concept to installation.

Modeling standard supports and customized piping supports. Experience with Laser-Scan technology of drafting and modeling.

Senior Piping Designer – 3D Piping layout

Worley Parsons Ltd – Markham, ON (Markham - Nuclear Division - Contractor)

Jan. 2014 – June.2017

Piping/Mechanical Designer/Drafter generating piping and instrument diagrams, process flow diagrams, and equipment arrangement and equipment assembly drawings for Darlington Nuclear in different projects:

Unit 2 Water hammer effect project. 3D Modeling and creating ISO drawings, and general arrangement views.

Service Air Compressor installation (unit 2 &3). 3D modeling of all piping system as a very reliable source during construction process.

Experience related conventional CANDU light water systems: LP Service Water, HP Service Water, etc.

Experience in building piping system with cooper pipes.

Creative problem-solving skills, outstanding analytical abilities, demonstrated leadership skills and the ability to work in a team environment.

Flexibility to work remotely on short-term customer site assignments

Breathing Air System (unit 2,3 & 4), creating compressor piping isometrics and pipe routing with field verification

Designing and layout *Mechanical Shop Layout of equipment’s* (TMOD unit2)

Creating 3D model for piping system and layout of equipment’s for the projects above. Acad 3D, Autoplant V8i and 3D Microstation V8i PDS have been used in 3D modeling.

Utilize, where appropriate, non-CAD drafting solutions (e.g. sketches) for equipment layout concepts and details.

Update PDF drawings into CAD files with appropriate layering.

Develop field sketches and prepare drawings from these field notes.

Senior Piping Designer – 3D Piping layout

Worley Parsons Ltd – Sarnia, ON Sept. 2013 – Jan. 2014

Contractor

Senior Designer &Pipe modeling in NOVA Corunna – Chemical Plant (Ethanol).

Modeling 3D piping in new compressors and drum vessels (Cooling Tower).using Autoplant Vi8 supported by WISE Platform.

Applying NavisWork in pipe clash checking.

Applying model of piping systems & flanges connected with them based on

Standards ANSI B31.3 & ASME VIII, ANSI B16.5 and client standards specific for chemical industries as well.

Senior Piping Designer – 3D Piping layout Feb. 2013 – August 2013

Ausenco Ltd – Toronto, ON

Designer &Pipe modeling in Constancia project – Coper-Molibdem Thickener area (Peru).

Creating 3D piping models with Autoplant V8i Piping using Project Wise platform for intelligent DB related to PID.

Applying NavisWork in pipe clash checking.

Using vendor data in updating pipe layout pipe layout on rack.

Modifying PID with drain points based on pipe routing.

Based on Tie-in points list creating rack supports from battery limits to destination, detailing it.

Organizing the dwg and building GA drawings based in the client requirements.

Experience with electrical drafting.

Experience with I&C designing and drafting.

Experience with Civil drafting.

Designing piperack and pipes on it.

Prepare pipe supports drawings as part of a construction work package.

Work to conform to client specifications, codes and standards following closely any suggestion from the client during client model review.

Extracting ISO’s from model using Autoplant software.

Using Naviswork for model review and checking.

Senior Piping Designer – 3D Modeling

Worley Parsons Ltd – Lloydminster, AB Aug, 2012 – Feb, 2013

Contractor

Creating models 3D for medium and small projects in HLU Husky from ten thousand to 800.000 dollars.

Generating ISO`s for these projects following until construction phase.

Projects related with client Huskry Upgrader.and Huskey Rafinery OCC.

Managing small project delivering in time.

Field trips for verifications of as build drawings, and collecting data to design

New piping systems based on the specific project.

Data collection from field and client dwg. System

Designing with Autoplant V8i modeling 3D software.

Using NavisWork for clash checking.

Raster Desing software for modification of tiff existing files.

Solid understanding of oil industrial standards during preparation of PID, layouts and GA drawings.

Senior Piping designer – 3D Modeling

Hatch Co., Oakville, ON Feb, 2012- Aug, 2012

Contractor

Modeling 3D piping in Tasiost project for FEL3 & FEL4 stage

Creating P&ID for Red Leaf project and following all the steps FEL2-FEL3.

Model created using PDS Microstation V8i

Intelligent PID using Microstation V8i

Piping designer – 3D Modeling

Hatch Co., Oakville, ON March, 2011-Feb.2012

Contractor

Designing accurate detailing P&ID, analyzing critical points in FEL4 stage.

Modeling 3D piping system Cianure capture for ‘Twin Creek’ project.

Modifying details on P&ID, and Extracting ISO layouts with BOM, use of PDS Microstation V8i

Modeling 3D piping in AER Sudbury project for FEL3 & FEL4 stage, use of Microstation 3D PDS.

Field contact and trip in establishing detailed measurement on piping route.

Designing Utility P&ID. separately for utility & process areas same as a special P&ID based on standards

Creating 2D layout and ISO for all model piping and MTO base.

Modifying piping around new nickel melting converters.

Modeling of Tie-in points and all piping related with those in different phases of the project.

Modeling 3D slurry piping for Agrium project (JV Vault – Project) with route optimizations, use of Smart Plant 3D.

Modeling utility system for new shop buildings and Utility headers on racks.

Piping designer

GENIVAR (Cook Eng.- Thunder Bay) Sept,2010- Feb,2011

Contractor

Field contact and trip to Paper Mill establishing detailed measurement on piping route.

Designing Utility P&ID. separately for utility & process areas same as a special P&ID based on standards

Creating 2D layout and ISO for all model piping and MTO base.

Creating dwg for special supports customized based on stress analyses.

Terrace Bay Paper mill project – installation of new Turbine.

Field trip establishing pipe layout and support standard & special location.

Model build based on Cadworks 2010 software.

Piping Designer

Hatch Co., Oakville, ON July 2008 –May 2010

Contractor

Preparation of PFD for Autoclave Technologies in Gold mines based on technology eng. information tabs.

Designing accurate detailing P&ID, analyzing critical points in worst scenarios.

Competence on drawing details on P&ID, and ISO layouts with BOM.

Confidence on standards ASME B31.1.0 and familiar with ASME codes, API, CSA.

Detailed mechanical layouts of vessels & their nozzles, based on eng. calculations, ASME VIII, ASTM, AWS, CSA standards.

Preparing piping ISO-s, BMO-s and piping spools for fabrication.

Accuracy in following up technologic process, fast learner and ability working under pressure.

Participation on projects as ‘IAMGOLD’, ‘PUEBLO VIEJO’, ‘VOICY BAY’, ‘DONLIN CREEK’

Modeling and intelligent PID based on Microstation PDS (SQL data base system )

Piping Drafter

Caddforth Design Ltd. Sep’ 2007 - May’2008

Contractor

Very good understanding of power plant designs, process and systems connected. Use of Autacad and Cadworks2006 software

Good knowledge on regulatory requirements of American Society of Mechanical Engineers (ASME) B31.1.0, B31.3 design codes and familiar with CSA, API, NFEPA

Drawing pipe systems and wellhead configuration on site, as build, based on standards ANSI B1.020; B16.5

Mechanical drawings of bridge crane etc, and detail layouts of their profiles & elements.

Drawing of pressure vessels and piping systems & flanges connected with them based on standards ANSI B31.3 & ASME VIII, ANSI B16.5

Drawing detailed dimensional mechanical layouts of vertical vessels & horizontal (separators or heat exchangers) showing nozzles and saddle 3D locations.

Creating BFD based on typical processes layouts, engineering data of site plan layout.

Creating PFD, coding equipment’s & vessels based on standards criteria and key areas.

Drawing Mechanical Flow Diagram (P&ID) based on eng. equipment information and API, ASME, ANSI drawing standards. Calculation based on CSA UG45 and CSA Z184

Designing Utility Flow Diagram separately for utility areas same as a special P&ID based on standards for water, fuel gas, air requirements for the plant.

Preparation of plot plans layouts based on site photos and piping line maps (ORTHO)

3D piping model and piping ISO’s with BOM’s based on CADPRO 2008 software’s.

Piping GA’s, piping and equipment’s sections, and piping details.

Drafting SAGD systems for tar sand exploitation based on advance technology.

Drafting well heads in SAGD technology using the ASME and API standards.

Participating in Conoco Philips project Surmont SAGD.

Piping Drafter

INTER-CONSULT Snc. Ferentino (Frosinone), Italy Jun’2003-Jan’2005

Competence in drawing with AUTOCAD software’s to prepare and process engineering designs and drawings.

Familiar with power plant designs, process and systems, new projects or as build.

Developed and updated plans in Ortho, P&ID’s and produced ISO-metrics & Bill of Materials.

Piping isometrics and piping spools for fabrication.

Equipment’s, Pipe rack, Pipe lines arrangements and structural piping support design and details.

Proven ability to work in unison staff.

Fast learner and accuracy in following up technologic process designs for better drawing quality.

VEVE Co- Vlora (Albania) Apr. 2001 – Apr. 2003

Supervisor of the logistic supplies

Contract

INA NAFTAPLIN (Crosco) VEVE Co-Vlora (Albania) Jun.2000 – Mar. 2003

Land Man (Permit Man)

ALBPETROL Fier Albania Jul. 1984 – May. 2000

Well site drilling engineer

EDUCATION

Process Piping Designer – SAIT College Mar’07 – Oct’07

ESL Academic Preparation - Chinook College Jan’06 – Dec‘06

Bachelor of Engineering in Drilling Engineering Sep’79 - Jan’84

Post-Graduate courses - IT Analyst / Programmer Sep’87 - Jun’88

Post-Graduate course - drilling of wells with abnormal pressure Sep’88 - Jun’89

PROFESSIONAL AFFILIATIONS

ASET membership

Safety certified:

H2S Alive and Construction Safety Training System (includes generic WHIMIS)

REFERENCES

Available upon request

Contact this candidate