PERSONAL DETAILS
NAME: MICHAEL G, PARADELA
RESIDENCE: PITALO SANFERNANDO, CEBU
EMAIL: adhhl0@r.postjobfree.com
MOBILE: +639-*********
POSITION: SAFETY OFFICER/ INSPECTOR
WORK EXPERIENCE: 5 YEARS ABROAD/ 4 YEARS LOCAL (APO CEMENT)
OBJECTIVES:
To communicate Health and Safety issues to the employees in order to maintain the company’s health and safety policies so as to suit the required demands of the project owner, client as well as national legal standard in order to maintain company’s business reputation via close monitoring, inspection, and supervision of the site mitigate the hazard.
ACADEMIC AND PROFFESSIONAL ACHIEVEMENT
National Examination Board of Occupational Safety & Health (NEBOSH) International General Certificate (IGC)
Institute of Occupational Safety & Health (IOSH)
Basic Occupational Safety & Health (BOSH)
New Safety International (NSI)
Scaffolding Supervisory/Inspector (Safety Awareness)
Electrical Installation and Maintenance NC II
Building and Wood International
Basic First Aid & Cardio Pulmonary Resuscitation (CPR)
Basic of Occupational Safety and Health
Defuse a Violent Person
Criminology (Under Graduate)
PERSONAL SKILLS:
Ability to supervised and inspect scaffolding
Ability to work under pressure and without super vision
Ability to work in challenging environment
Ability to preserved life, prevent deterioration, promote recovery & provide treatment for minor injury
Excellent supervisory and strong communication skills
Excellent team player
Can analyze & implement plans effectively
Advice on the influence develop of HSE management system
Good knowledge of HSE regulation & guidelines
Experienced in civil construction.
EMPLOYMENT HISTORY
Company: APO Cement Corporation/CEMEX Phils. (Tina-an, City of Naga, Cebu)
Project: Cement Plant
Position: PROJECTS EHS INSPECTOR (August 20, 2020 – Present)
The position represents the client that includes overall Safety inspection/supervision over the General Contractors and sub-contractors safety officers, coordinates with the APO EH&S Department on permit to work systems and also the in-charge of the contractors whole project safety implementation during the Construction and commissioning of Cement Mill # 3 Project; 3000 Tons Cement Silo; Feeding Hopper Building; Feeding building; Filter building; conveying systems and conveyor galleries; Jetty / Port and additive hopper area. The project has achieved 1.8 Million Safe Man-hours LTI free upon its completion date.
Company: S&P Construction Development Company (APO Cement Main Contractor)
Project: High Rise Bldg (Power Plant)
Position: Safety Officer (September 2018 – May 2019)
Company: Labreg Construction (APO Cement Sub-Contractor)
Project: Plant Maintenance
Position: Safety Officer (January 2018- July 2018)
Company: Tan Engineering (APO Cement Sub-Contractor)
Project: Conveyor Guarding
Position: Safety Officer (October 2017- December 2017)
Company: Beta Equipment Sales & Corporation (APO Cement Sub-Contractor)
Project: Conveyor Maintenance
Position: Safety Officer (MARCH 2017 – SEPTEMBER 2017)
Company: Construction Development Company (Doha Qatar)
Project: High-rise Bldg (Marsa Malaz Hotel Main Contractor)
Position: Safety Officer (MARCH 2011 – SEPTEMBER 2013)
Company: Construction Development Company (Doha Qatar)
Project: High-rise Bldg (New Hamad Port Project Main Contractor)
Position: Safety Officer (MARCH 2014 – SEPTEMBER 2016)
DUTIES AND RESPONSIBILITIES
TOOLBOX TALK
Conduct weekly/or on the spot Toolbox Talk regarding the unsafe observation, ES&H messages and give recommendation to reduce the hazard and risk associated the task. Check and ensure contractors/subcontractors comply with safety rules and regulations.
WASTE MANAGEMENT ( PROPER HOUSEKEEPING)
Ensure contractors have suitable and sufficient waste receptacles available, clean and tidy condition. Ensure proper segregation of waste materials.
SCAFFOLDING
Ensure scaffolds have tag signed by competent person, displayed in date. Check scaffolds and access are completely safe, tied off and in good condition. Ensure tools and equipment is not carried by hand while using the ladder.
ELECTRICITY
Ensure frequency of inspection and color coding of all power tools and electrical cables be followed strictly. Check to ensure electrical supply equipment been tested, power supply equipment have been properly earthed, devices are covered to prevent to moving/electrical components. No cuts and not creating trip hazard.
PLANT AND MACHINERY
Ensure all operators been trained in its use and hold relevant valid competence certificate i.e. driving permit for plant; valid driver licensed. Check if plant and machinery have adequate warning system installed. Ensure it to have undergone inspection and in good condition for daily/weekly monthly checks and ensures that it should being used which fit for the purpose with competent banks man in place to control movement.
Fall Protection (Working at Height)
Ensure workers working at height have the correct fall protection devices, edge protection; crash mats, safety nets, full body harness. Check all walkways are free from any obstruction. Check all harness is in good condition and free from defects.
HOT WORK
Ensure hot work permit in place covering the work activities, valid date and relevant method statement/risk assessment attached. Ensure fire extinguisher is provided and the area is cleared of any combustible/flammable materials and fire watchman is in attendance of the location both during and 30 minutes after hot work activities.
LIFTING OPERATIONS
Ensure all lifting tools and accessories have valid lifting certificates, crane certificate (TPC) and all safety devices, i.e. crane alarm in general condition. Check crane operator complies with daily inspection. Ensure lifting operation is properly planned, load dynamics, ground level, outriggers are fully extended and properly set up to protect the swing radius of the equipment and it should be well supervised.
EXCAVATION
Ensure necessary permits are available, valid date with relevant drawing attachment for existing buried services. Check if excavations are in good condition with no evidence of cracks/minor collapse of materials. Check excavation complies with the method statement. Ensure appropriate barricades around the excavated area, with proper and safe access, amber lights at night and appropriate signboards are in place.
WORK IN CONFINED SPACE
Ensure preliminary test, conduct job safety analysis and give recommendation to reduce hazards present in confined space prior to commence the task. Ensure proper access/ingress be installed as well as emergency retrieving equipment. Ensure person/s authority to enter the confined space, duration of work, time in and out. Ensure standby responsible person for frequent monitoring. PTW system must be followed strictly.
CONDUCT SAFETY BRIEFING, STARRT – SAFETY TASK ANALYSIS RISK REDUCTION TALK
Observant to employees from highest position to lowest position, areas of task based to safety. Conduct re-briefing for the unsafe acts and conditions. Reporting to direct supervisor and warn to unlawful.
DUTIES AND RESPONSIBILITIES
Assists in promoting Occupational Health and Safety within the company and develop safer and healthier workplace and procedures.
Ensure that workplaces conform to safety standards and all necessary permits are secured before work execution.
Ensure that employees are complying with the safety policies, plans and procedure
Ensure that personal protective equipment being used in work places is in accordance with required standards.
Assists in regular inspection of Building, Tools, Fire Extinguisher, PPE and lifting equipment.
Assist in the correct storage, labeling and provision of MSDS for dangerous materials.
Assist in carrying out inspection of workplaces and take necessary action to ensure compliance.
Records and reports hazards, accidents/incidents, injuries and health issues within the workplace.
Assist in the investigation of accidents/incidents and unsafe working condition, Study the possible causes and recommends remedial action.
Participates in organizing emergency procedure, rescues, firefighting and first aid.
Assist in conducting regular delay toolbox meeting in the workplace.
Prepares and processes the pre and post project safety permits and related documents required by the client.
Partakes in the preparation of inspection report of the health and safety.
Performs other related task as assigned.
AREAS OF INTEREST
Develop health and safety programs
Train and educate the workforce about the proper way of work conclusion and about the adherence to company standard of work
Efficient under pressure, willing to stretch extra hours to complete work and assign work.
COMPUTER SKILLS
Efficient use of Microsoft office packages
Versatile Knowledge of the internet
I herby certify that the above particulars given are true and accurate to the best of my knowledge and belief.
MICHAEL PARADELA
APPLICANT