M.MUBARAK ALI

Mobile No: +966*********.

E Mail: adhhf5@r.postjobfree.com

Skype: mubarakfirst1

CAREER OBJECTIVE:

To work with full dedication in an environment where I would constantly learn and successful solutions to various problem.

PERSONAL PROFILE:

Total 10 + Years of Experience in Construction/Design field for the GCC countries Projects including Design and build EPC Projects.

Successfully completed more than 50 various kinds of Projects. Such as Hospital, Substations, Residential, Commercial, Laboratory, Infrastructure, Industrial type, Highways, Aircraft Hangar & Maintenance Building, Airport Terminal building,Etc

Familiar to Co-ordination with Clients/Stakeholders/Authorities and PMC such as Kahramaa, Ashghal, Ooredoo, SSD, QNBN, QAF, Etc…

Strong ability of Electrical Design calculation as well as review/comment/Approve for the Electrical Design calculation and drawings.

Working Experience:

1.IHCC (International Hospital Construction Company) Jeddah, KSA.

Working as an Electrical Design Engineer for EPC Projects from November 2017 to till date.

Job Profile:

Assisting to Electrical Draftsman to Prepare Electrical Design drawings Lighting, Low Voltage, Power and Cable tray layout based on Client’s Requirement and project Specification.

Designing Lighting Lux level calculation using by Dialuxevo software.

Preparing DB schedules, SMDB Schedules & MDB Schedules which includes, Breaker selection, Cable size, Busbar size etc. as per National Electrical Code (NEC).

Prepare Single Line Diagram, Designing appropriate power sources to Medical Equipment Requirement, Server, Communication Requirement and Mechanical Equipment HVAC, Smoke system, Plumbing & Firefighting equipment (Normal, Emergency, Life and safety & UPS Power source)

Projects Involved:

300Beds Saudi German Hospital, Dammam and Makkah in Kingdom of Saudi Arabia.

300Beds Saudi German Hospital, Alexandria in Egypt.

Beverly Clinics, SGH Abha Clinics, SGH Al-Nahda Clinics, & SGH Taawun clinics. in KSA.

Saudi German Hospital, Center of Excellence in Dubai, UAE.

2.Peacock Technical Engineering Pvt, Ltd. India and Qatar.

Worked as an Electrical Design Engineer in Peacock Technical Engineering Pvt,Ltd. from October 2015 to Feb 2017.

3. Daewoo Engineering & Construction, Qatar.

Worked as an Electrical Design Engineer for the design build (EPC) Project, New Orbital Highway and Truck Route C4, Project Value US$910 Million in Qatar.

Job Profile:

Preparing/Submitting MV/LV Design based on Project Specification and Kahramaa Electricity Planning department regulations.

Preparing/Submitting EHV/HV 400KV, 66KV OHL Diversion work design in order to achieve vertical and horizontal clearance based on Kahramaa’s requirement.

Co-ordination meeting with Kahramaa Transmission department in order to gain approval from them and case by case basis requirement.

Preparing/Submitting pylon foundation design based on Geotechnical investigation report.

Preparing/issuing Official letter to supervising consultant for their Review and recommendation such as Potential new work direct from Stakeholder, Claim letter, Stakeholder delay issues, etc…

Preparing Kahramaa weekly (Agenda) meeting for pending issues and attend the combined meeting with KM-E Engineer in front of (PMC) Project Management consultant.

Preparing/Submitting Telecommunication design and have earlier meeting in order to gain earlier approval from the respective stakeholders in this case Ooredoo, Vodafone, QNBN Network based on each and every individual stakeholder requirement/regulation.

Preparing QAF (Qatar Armed Force) and MoI-SSD (Security System Department) design based on their requirement and submit for their review/comment/approval.

Preparing Street lighting, underpass lighting, Tunnel lighting and braiding lighting design based on QHDM (Qatar Highway Design Manual) and submitting to Ashghal O&M (Client) for their review/comment/approval.

Arrange the meeting with each and every stakeholder in order to gain early approval from them in addition stakeholder case by case basis requirement for the particular project.

Attending Bi-weekly meeting with Design Supervision consultant and PMC (Project Management Consultant) for the project design status and further advice.

4. QDC INDIA CONSULTING PVT.LTD, India and Qatar.

Worked as an Electrical Design Engineer in QDC INDIA CONSULTING Pvt.Ltd. (Subsidiary of Qatar Design Consortium) from November 2011 to November 2014.

Job Profile:

Preparing Preliminary Design & Design Base Memorandum (DBM) Based on project Scope of work & Specification.

Design of Lighting, Power system & Lightning Protection System.

Preparing Lighting Lux level calculation using by Dialux software.

Prepare Electrical Single Line Diagram. Including Transformer/Generator Selection.

Cable size Calculation & Voltage Drop Calculations. For Kahramaa & QP Project (BS Standard).

Design of ELV system (Fire Alarm, Telecom, CCTV, ACS & Public address system).

Projects Involved:

6Nos Kahramaa Substation 220/66KV & 66/11KV (MEP service only) – Doha Qatar.

Qatar Petroleum – Instrument air compressor at GDS station B & E Mesaieed, Qatar.

QAFAC Laboratory, Doha, Qatar. [GF]

HMC-Bio bank Hospital, Doha, Qatar. [GF/1F 4F/Mech.Fl]

ANP - Afghan Nation Police, UPHQ & PRC#1 Site, Kandahar, Afghanistan.

SMW - Special Mission Wing, Aircraft Hangar, Maintenance Workshop, Barracks Buidings,Etc.. Kandahar, Afghanistan.

Qatar University Store, Doha, Qatar. [GF/Mzz]

Commercial & Residential Project at Al Thumama, Doha, Qatar. (11Kv MV Design only)

5. MIDMAC CONTRACTING.CO W.L.L, Doha, Qatar.

Worked as an Electrical Engineer in MIDMAC Contracting Co. from June 2009 to Oct 2011.

Job Profile:

Studying Project Scope of work, Specification & IFC Drawings.

Assist & instruct to Draftsman to prepare Shop Drawing for lighting, Power, Fire alarm, Telecom and other Extra Low Voltage (ELV) drawings for Consultant approval.

Prepare the Load schedules and equipment schedules.

Assisting Electrical engineer for quantity take-off.

Co-ordination with site foreman for providing drawing details.

Attending the site review meeting with subcontractors.

Updating the shop drawing for solved site issue.

Marking and protection of As-Built drawings.

Projects Involved:

RIZON (VIP) Air Terminal and Hangar Building in Doha, Qatar.

NDIA - New Doha International Airport, Concourse - D and E in Doha, Qatar.

6. ETA InfoTech E&C Division, Dubai.

Worked as Electrical Engineer at ETA InfoTech E&C Division, Dubai during April 2008 to January 2009.

Job Profile:

Prepare TQ/RFI to Consultant for Clarification/Information wherever needed.

Review and update shop drawings as per Consultant/DEWA Comments.

Updating the shop drawing for solved site issue.

Projects Involved:

HRH Beach palace, Dubai[GF/1F/Roof]

Logo island, Dubai.[GF/1F/Roof]

Al Burj Villa, Alain.[GF/Roof]

7. Altech Star Solution (p) Ltd, Chennai, India.

Working as a Electrical CAD Draftsman in Altech Star Solutions (P) Ltd. Chennai from April 2007 to March 2008 (1 Year)

Job Profile:

Electrical Shop drawings preparation of Electrical lighting layout / Power layout, Electrical Load Schedule, and other schematic Drawings.

Quality checking of drawings as per consultant specification.

Projects Involved:

Al-Ajmi Office & Residential tower, Dubai.[ 2Basement/GF+1F/28FTypical/2Roofs]

New garden British school project, Abu Dhabi. [GF/1F/2F/2Roofs]

iMec Villas, Dubai.[GF/1F/RF]

The palm Jumeirah Gateway Towers, Dubai. [Basement/GF/14F/RF]

8. DSP Technologies, Chennai, India.

Worked as an Electrical Cad D’man in DSP Technologies, Chennai. From May 2006 to April 2007.

Job Profile:

Preparing electrical layout for lighting, Power in Auto Cad.

Draw schematic diagram for electrical building works.

Technical Qualification:

I.Completed B.Tech in Electrical Engineering Passed in July 2013 (Course period July 2010 – July 2013) in SSK College, Chennai.

II.Completed First Class with Honors Diploma in Electrical and Electronics Engineering Passed in April 2006 (Course period July 2003 – April 2006) Mark scored 91.87% in Thanthai Roever Institute of Polytechnic College, Perambalur.

Additional Qualification:

(a) Auto CAD Completed ‘A’ Grade Computer Aided Design 2000/2004 in CADD Centre, Perambalur.

(b) Diploma in Computer Application Completed ‘O’ Grade in Everonn Computers, Chennai.

Software Known: Auto cad, Dialux evo, E-Design ABB, Revit MEP (Basic) & MS-Office.

Personal Details:

Date of Birth : 07.06.1986

Marital Status : Married

Nationality : Indian

Languages Known : English, Tamil, Hindi and Kannada.

Permanent Address : #139/32, Bilal (Rali) Street,

Labbai Kudi Kadu – 621108. Perambalur District.

Passport Number : P1867660 Date of issue 12/01/2017 @ Trichy.

Declaration:

I hereby declare that all the Above Furnished Details are True to the Best of My Knowledge and Belief.

Thank You.

Yours Faithfully

Place : Jeddah, KSA.

Date : (M.MUBARAK ALI)

Contact this candidate