Nitish Kumar Singh

Assistant Engineer at River Engineering Pvt. Ltd.

ABOUT ME Work

Technical Skills

HOBBIES

I was responsible for proposing and implementing

design strategies that promoted revenue growth

generation among key targeted segments and

supported product design and development. My

responsibilities also included CAD and executing

CAE and strategies to certification of the product. Assistant Engineer River Engineering Pvt. Ltd.

2019 - Present Greater Noida, U.P. 201301

+91-629*******

adhgk6@r.postjobfree.com

H.N.99, Noida Sector 12,

U.P. 201301

Design Engineer Miraash Engineering & Technology Pvt. Ltd. 2017 - 2019 Greater Noida, U.P. 201301

Assistant Engineer CIPET

2019-2020 Raipur, C.G. 492003

B.E. Mechanical Engineering.

2012-2016 RGPV, Bhopal, M.P.

10+2th Physics, Chemistry, Mathematics

2010 -2012 Bihar School Examination Board Patna, Bihar 10th General Subject

2009-2010 Bihar School Examination Board Patna, Bihar

Team Work

Problem Solving

Flexible

Ansys

AutoCAD

Creativity

Industrial Competences

(Start to End Solution of Product Design and Development)

Review Design Input (New / Overhauling Product)

Submission Plan of Project, Project management, Risk Management, Process development and its monitoring.

Creativity, Conceptual design, iterative designs and development of solutions.

Finding the best way of Product Development, Maintain ECN, Standardization, Technical reporting, Product Assurance, etc.

3D Model and 2D Drawing (Released Development, Schematic, QC, Production, Purchase Drawing)

Finding Best way to Installing / Uninstalling through Ergonomics Analysis

Wire Harness Design

FEA Case Study{Structural (linear & Non-linear) Analysis, Fatigue Analysis, CFD}

Rendered Image

Create BOM on ERP System

Quality Assurance Plan (QAP)

Monitoring of Product Assembling and Internal Testing

Finalized Prototyping (Released Master Drawing)

Jig & Fixture Design for Production

Handover Design to Customer / Production Department Education

Technical Competences

Aeronautical Product Design and

Development {Interiors/(Fuselage, Cargo &

Cockpit), Seats, CB Panels, Baggage

door,Structure (Skin, Frame, and Stringer),

Aerospace Structure Development, Plastic

Product Design, Sheet Metal Design, and

Metal Casting Design} by referring aircraft

specific manuals like AMM, CMM, SRM, etc.

and AIRCRAFT Standards, Modeling,

Methodology, Onsite Visit and naming

convention.

Aircraft MRO Hanger Drawing (GA, P&ID,

Electrical & Fire Hydrant) and Design

(Heavy Duty Tables, Trestle Tables, etc.),

Onsite Visit, etc

Locomotive: -EP Contactor, Shunting

Contactor, Motor Contactor, C-145, Drum type

(Reverser, CTF 1&2, CTF 3), CAM type

(Reverser, CTF 1&2, CTF 3), BA Panel,

Onsite Visit, etc.

Automotive Industry: - Electric Bus {Interior

(Lighting, Pillar Trim, Dashboard Panel

Trim, etc), Exterior (Lighting, Doors Trim,

etc)}, BMW Fixture Assembly Drafting and

Part Detailing Drawing and its checking.

Proficient in Parametric modeling, Solid

modeling, Surface modeling (All Class

surface), Sheet metal design, Weld-Element

Design, Assembly design, Wire Harness,

DMU (Digital Mockup), Ergonomics

Analysis, Organization Template,

Manufacturing Processes (Injection and

Blow Mold, Gravity Die Casting, etc) and

Drafting with GD&T.

Plastic Product Design, Structural

Analysis, CFD Analysis and Classical

approaches (hand calculations) to a variety

of problems.

Familiar with international design codes like

ASME Y14.5, MS, ISO, IS, SAE, FAA, EASA,

IEC, BIS etc.

Familiar with awareness of (AIS, FMVSS,

ECE, EURONCAP etc.)

#.1 Project Detail:

Solution Locomotive

Project name: EP Contactor, BAP Panel

Duration Sept./2019- Oct/2020 Client: Indian Railway Project objective: -

EP Contactor (Shunting Contactor, Motor Contactor, C-145, Drum type (Reverser, CTF 1&2, CTF 3), CAM type (Reverser, CTF 1&2, CTF 3), BAP Panel, Product Design and Handover to Production Department

Contribution & Responsibility: -

Submission Plan of Project,

Maintain ECN & CMR, Project management, Risk Management, Process development and its monitoring.

Finding the best way of Reverse Engineering of Product Development

Create to 3d Model and 2d Drawing (Released Development Drawing), Create DFA&DFMEA, Tolerance Stack up Analysis, Check Space Analysis

Create BOM (For New Product Development and Over Hauling Product) on ERP System

Released Master Drawing, Purchase Drawing, Inspection Drawing, Manufacturing (Casting Part) Drawing use GD&T

APQP, PPAP, Test Procedure (TP),Quality Assurance Plan(QAP), Routine and Type Test Plan, Internal Inspection Report, Customer Inspect Report of Each Product

Monitoring of Product Assembling and Testing

Fixture Design for Testing and Assembly

Finalized Prototyping (Released Master Drawing)

Handover Design to Production Department

Professional Experiences

Add-on Certificates

Lightweight Project Management

Assessment

AIAG VDA FMEA 1st Edition

Language

English

Hindi

Catia

#.2 Project Details:

Solution Electrical Bus

Project name: Bus Full Design(Interior and Exterior) Duration April/ 2019- Sept /2019 Client: Azad

Project objective: -

Finding the best approach to Door Trim, Door Pillar, Front light, Indicator light, Fog light, Windows Frame with Glass Mounting, Dashboard, etc

Contribution & responsibility: -

Found the best location of Every Component, Space Analysis, Task scheduling and Distributed task within team Member.

Created All Front, Both Side and Back trim Surface, Pillar etc. Use All Class Surface to Complete Part Design and Assemble in bus and Check Space Analysis, Tolerance Stack up Analysis.

Create Main Drawing and Manufacturing Drawing, Inspection Drawing, etc with GD& T

Created Rendered Image

#.3 Project Detail:

Solution Aerospace

Project

name:

Inseat Usb Power Suppy- Retrofit Installation

For Cellphone Charging In Different

Aircrafts.

Duration Oct/2018- April/2019 Client: SpiceJet

Technic.

Project objective: -

Research and Design for Usb Charging Port Facility in Boeing and Bombardier Aircrafts for Passengers.

Contribution & Responsibility: -

Recreating CAD Model of Existing Seats Assembly of Boeing Aircraft by using Component Maintenance Manual

(CMM) And Physical Inspection.

Space Analysis for Best Placement of Usb Charging Port Facility, DC-DC Converter, AC-DC

Converter, Circuit Breaker, etc.

Ergonomic Analysis for the Usb assembly At Different positions as per manikin of Indian Anthropometry Standard.

Development of 3D Model of Usb Mounting Assembly, DC-DC Converter Mounting Assembly, AC-DC Converter Mounting Assembly includes Different Types Of Bracket.

2D Drafting of all the Parts to be manufactured using GD&T..

Static Structural Analysis of Different Brackets to be manufactured in ANSYS Workbench.

Wire Harness Routing from C.B to P.S, PS to DC Converter, DC Converter to USB.

2D Documentation of the Project for certification as well as for CMM.

Video and Rendered Image Shooting for presentation.

Prototypes Install in Aircraft and it’s Validated

#.4 Project Detail:

Solution Product Design

Project name: Design of Down Draft Table.

Duration Sept/2018- Oct/2018 Client: SpiceJet

Technic

Project objective: -

Product Design of Down Draft Table for Machining of Aluminum Parts.

Contribution & Responsibility: -

Creation of 3D Cad Model of Down Draft Table Assembly.

2D Detailed Drafting of Parts and Assembly with BOM using GD&T.

#.5 Project Detail:

Solution Aerospace

Project

name:

Retrofitting of Non-Halon Fire Extinguisher for

Q400 Bombardier Aircraft

Duration Jul/2018-Aug/2018 Client: SpiceJet Technic. Project objective: -

Retrofit of Non-Halon Fire Extinguisher by Replacing Existing Halon Fire Extinguisher in Bombardier Q400 A/C.

Contribution & Responsibility: -

Creating 3d CAD Model of Existing Halon Bracket and Its Mounting Bracket by Reverse engineering.

Creation of 3d CAD Model of Non-Halon Fire Extinguisher and its Mounting Bracket as Per the existing Hole Pattern in the Forward Wardrobe, Aft Wardrobe and Cockpit.

2D Drafting of The Bracket to be Manufactured using GD&T.

#.6 Project Detail:

Solution Product Design

Project

name:

Design of different Maintanance Trestles for

the Aircrafts

Duration May/2018- Jul/2018 Client: SpiceJet

Technic

Project objective: -

Design of Wind Shield Trestle, Engine Trestle, Wheel well Trestle Contribution & Responsibility: -

Creating 3D Model of Trestles.

2D Drafting and Detailing of Parts and Assembly using GD&T

Static & Dynamic Structural Analysis in Ansys.

#.7 Project Detail:

Solution Automotive Engineering / Production Design Project

name:

Design of Welding Fixtures for different car

panels.

Duration Apr/2018-May/2018 Client: PEUGEOT

CITROEN

Project objective: -

Drafting of welding fixtures for different car panel of BMW which included door, Roof, Bonnets etc.

Contribution & Responsibility: -

2D Drafting which included drawing creation of all manufactured parts with appropriate production details and symbols as per GD&T.

Drawing Quality Checking

#.8 Project Detail:

Solution Automotive Engineering / Production Design Project

name:

Design of Welding Fixtures for different car

panels.

Duration Oct/2017-Apr/2018 Client: PEUGEOT

CITROEN

Project objective: -

Drafting of welding fixtures for different car panel of BMW which included door, Roof, Bonnets etc.

Contribution & Responsibility: -

2D Drafting which included Drawing creation of all manufactured parts with appropriate production details and symbols as per GD&T.

Drawing Quality Checking

#.9 Project Detail:

Solution Plastic Product Design and Mold Development Project

name:

Design of Bottle, Cap, Side mirror of Automobile

etc

Duration Aug/2016-Sep/2017 Client: CIPET

Project objective: -

Plastic Part Design from reverse engineering and Mold Design Contribution & Responsibility: -

Create 3D Model of part

Create its Mold Design Guided by team leader

2D Drafting and Detailing of Parts and Assembly with GD&T. Created DMU Kinematics and Space Analysis

Contact this candidate