Engineer Construction Manager

Location:

Khobar, Eastern, Saudi Arabia

Salary:

20000

Posted:

November 02, 2020

Contact this candidate

Resume:

MOHSIN MUNIR

Instrument and Control Engineer

Total Experience: 14 Years

Transferable Iqama

KSA Cell: +966-*********

E-mail Address: **********@*****.***

EMPLOYMENT HISTORY:

Last Employer : Eram Engineering Company

Location : KSA

Position : Instrument and Control Engineer

Duration : January 2018 – July 2020

Employer : JAL

Location : KSA

Position : Instrument and Control Engineer

Duration : July 2012 – December 2017

Employer : Olayan Descon Engineering Company

Location : KSA

Position : Instrument and Control Engineer

Duration : June 2008 – May 2012

Employer : Siddiq Sons Company Limited

Location : Pakistan

Position : Shift E & I Engineer

Duration : January 2007 – May 2008

PROFESSIONAL QUALIFICATION:

Qualification : BS (Electronic Engineering)

University : Sir Syed University of Engineering and Technology, Pakistan

Duration : 2003 – 2006

Membership : Saudi Engineering Council

TRAINING COURSES:

More than twenty (20) online Saudi Aramco safety courses.

Basic Life Support(BLS) training from the Saudi Aramco Team

In-house training certification of Leadership skills

Electrical Low Voltage Awareness Training

Fall Protection Awareness Training

Safe Behavior Observation(PSI) Program Training

Confined Space Entry (CSE) Awareness Training

Excavation and Trenching Awareness Training

Scaffold Safety Awareness Training

Industrial Hygiene Awareness Training

Respiratory Protection Awareness Training

Rigging Awareness Training Hydrogen Sulphide(H2S) Awareness Training

KEY EXPERIENCE:

Instrument and Control Professional with 14 Years Experience in EPC Oil and Gas/Petrochemical Projects in design and construction. Handling Instrumentation & Control systems Project Management starting from Detail Design, Construction,Pre-Commissioning, Commissioning & Startup activities (which includes FAT/SAT, Calibration, Installation Supervision, Logic checking, loop checking, Functional checking, Pre-commissioning and Commissioning of Field Instruments and Control Systems).

Have experienced in detailed design like 30%, 60%, 90% and IFC (Issued for Construction), red mark up and as built drawings. Have experienced in reviewing and preparing P&ID’s, Control System Philosophy, Control System Specification (DCS, RTU, SCADA, PMS), IO list, Instrument Index, Logic Narrative, Logic Diagrams, Cause and Effect Diagrams, System Architect Diagram, Instrument Cables Block diagram, Instrument Specification Sheets, Instrument Installation Schedules, Instrument Point and line, Instrument interconnection diagrams, Instrument Cable Routing, Instrument Cable Schedule, Junction box wiring, DCS/ESD/VMS Data base, MTO, ILD’s, Scope of work, site visit reports.

Specialized in Instrument and Control System which include field instrumentation, GE Mark-Vie Control system, GE Turbines related instrumentation, Process controls systems Pneumatic, electronic and microprocessor (DCS), Safety related system (ESD), SCADA systems, Power System Automation (PSA), Leak Detection System (LDS), Remote Terminal Units (RTU).

Worked on various Control Systems like DCS - Honeywell-TDC3000, Yokogawa Centum VP, ESD-Yokogawa-Prosafe, Fire Alarm System – Honeywell, RTU – Emerson.

Experienced in various Third party-Subsystems such as Vibration Monitoring System (Bentley Nevada 3500), Smoke Detection system (VESDA), Flow Metering System-ODS, Alderly, Flow Computers-OMNI, Continuous Emission Monitoring System and Power Monitoring System (PMS).

Proficient Experience in managing and co-coordinating with EPC contractor/Licensor/Vendors & Suppliers for Detail Design Coordination, Project Construction, Pre-commissioning, Commissioning & Start Up activities.

Thorough Knowledge of SIL, Hazardous area classification, NEMA, ISA, IEC and Saudi Aramco & SABIC Standards.

Experience of Erection, installation, calibration, pre-commissioning and commissioning of Instrumentation Works in Oil & Gas and Petrochemical plants of Saudi ARAMCO & SABIC.

Well versed experience of GE 7E Turbine installation, calibration, loop testing, Functional test, Pre-commissioning, Commissioning and Start-up of GE Turbines.

Experience of configuration between GE Control System (Mark Vi-e system) and Yokogawa DCS System.

FAT (Factory Acceptance Test) of DCS system (Yokogawa) and GE Control System (Mark-Vie).

Logic and Functional test of the instruments which involves the field instruments as well as Vendor instruments.

Field experience of installation, calibration and testing of Gas Detectors (H2s, LEL, etc.)

Field experience of installation of LDS (Leak Detection System) and RTU’s (Remote Terminal Unit).

SAT (Site Acceptance Test) of PEECC-GE system, CEMS(Continuous Emission Monitoring System) and Analyzers.

SAT (Site Acceptance Test) and installation of Fire Alarm system at the Substations and in the field.

Installation and commissioning of CO2 Fire Fighting Control System.

Post installation test of FOC (Fiber Optic Cable), end to end testing and splicing.

Installation, Calibration, Loop testing and commissioning of Control Valves, Shut down Valves, MOV’s, ON/ OFF Valves etc.

A)PROJECTS HANDLED OF SAUDI ARAMCO:

PROJECT : EAST WEST PIPELINE PROJECT / MASTER GAS SYSTEM PIPELINE (BI – 10-018**-****-***)

CONTRACTOR : ARKAD

DESIGNATION : PMT INSTRUMENT AND CONTROL ENGINEER

PROJECT DETAILS:

Master Gas Pipeline Phase II, project division (Organization code – 30030225 Central Area Pipeline Unit) which constructed 46” OD pipeline with total length more than 226 km.

RESPONSIBILITIES:

Worked as a Saudi Aramco PMT Instrument and Control Engineer through SMP Contractor for Master Gas Pipeline Phase II Project assigned to Central package (East West Qassim Gas Pipeline).

Was responsible for managing the LSTK contractor for Detail Design, Project Construction, Pre-commissioning, Commissioning & Start Up activities.

Closely follow-up the plan/Expedite pending Tasks, Engineering Deliverables with Main EPC Contractor(Arkad) & Design Contractor (Atkins) to meet the actual Progress.

Closely follow up with main contractor and design contractor for all phases of engineering deliverable like 30% design, 60% design, 90% design and then final Issued for Construction (IFC) drawings.

Coordinate with other technical departments of Saudi Aramco in case of critical issues faced during design stages.

Review & Approval of Detail Design Drawings, Instrument Specifications from main design contractor and close co-ordination with them for any Design discrepancies.

Close follow up with contractor to ensure the project schedule and quality are met. Managing the construction activities, participating in daily and weekly progress meetings.

Prepare Company response for Contractor Transmittals/TQ’s of project instrumentation and control system documents. Review and approval of contractor IFC Drawings, Material Requisitions, NMR, Technical documents and resolve Contractor technical queries for instrumentation items.

Monitoring instrumentation installation and procurement activities of EPC Contractor. Identify and present resolution of design and field installation problems.

Plan and Coordinate – Calibration, Factory Acceptance Test (FAT), Site Acceptance Test (SAT), Loop Checks/Functional Test activities with Contractor and proponent Team.

Involved in different FAT and SAT of Leak Detection System (Pipetech) and RTU’s (Emerson).

Make sure that contractor perform Installation, calibration and testing of Gas Detection System as per IFC and Saudi Aramco standards.

Prepare the change order where ever there is deficiency in the scope of work.

Prepare different supplementation that includes scope of work of different sub contractors and vendors, prepare the bid estimation.

Arrange different scope alignment meetings, negotiation meetings and kick off meetings

Supervise different electrical and communication site activities like Fiber Optic Cable (FOC) laying, end to end testing, Optivault installation, Solar system installation, lighting installation.

PROJECT : NGL (NATURAL GAS LIQUID) PROJECT (BI – 10-001**-****-***)

CONTRACTOR : SAMSUNG

DESIGNATION : INSTRUMENT AND CONTROL ENGINEER

PROJECT DETAILS:

B+8 3 H"%) ) 1 3 H"%) K

3 1 A 08

B+8 9 2 1" 1' 1" K

)$ 3

) ) 2 1"

) 1 ; 3 H"%)

0 2 1"

) 1 7 F 0 2 F, 4 6 0 2 F,4 1 6 0 "

1 )$ 7 ) " " ) ) E L 4+E6 M ) M ) 4G/6

) ) ) ) ) 1' 1"

NGL Project contains below mentioned Project divisions:

Power Generation/OHTL

NGL Recovery Facilities and Utilities:

Increase Gas Handling Capacity PH-1/4

Industrial Support Facilities

Interconnecting Pipeline project

Temporary Camp Facilities

Power generation Division includes Installation of 7 GE Turbines Frame 7E ( Simple Cycle ) and 4 GE Turbines Frame 7E( Co-Generation ), The power generation capacity of these turbines was more than 1 Giga Watt (GW), a 50-kilometer 230 kilo volt (KV) transmission line, and the associated electrical and non-electrical utilities.

RESPONSIBILITIES:

I was assigned as a Saudi Aramco PMT Instrument and Control Engineer through SMP Contractor for Natural Gas Liquid (NGL) project in Power Generation Division.

My main responsibilities were to take care of all the instrumentation activities like design review, documentation, installation, pre-commissioning and commissioning activities.

Close coordination with EPC Contractor (Samsung) in design preparation for a resolution of technical issues.

Review detailed design and make sure that Saudi Aramco Engineering Standards are followed by EPC Contractor.

Worked with Samsung (EPC Contractor), DCS and ESD Vendor (Yokogawa) and Turbines Vendor (GE) for Factory Acceptance Test of DCS, ESD and Mark Vie Control System of GE.

Worked with Samsung (EPC Contractor), DCS and ESD Vendor (Yokogawa) and Turbines Vendor (GE) for integration between DCS System (Centum VP system of Yokogawa) and Mark Vie Control System of GE.

Involved in the FAT, SAT, calibration and commissioning of different types of analyzers at site.

Monitor site activities like instrument calibration, installation, functional test, loop test and commissioning of field instrumentation and vendor instrumentation.

Worked with contractor and vendor for the integration of different system with DCS system like Vibration Monitoring system, Power Monitoring system, Fire Alarm system, Gas Detection system, Continuous Emission Monitoring System.

Review pre-commissioning and commissioning procedures and make sure that these are complying with Saudi Aramco standards.

Worked with Contractor, Vendors and Proponent team for commissioning and start up of complete system.

Organize PMCC walkthrough with Contractor and Proponent and do further follow ups with Contractor to close the punches in Saudi Aramco MPCS (Mechanical Performance and Close out system) to deliver the required PMCC sign off as per schedule.

B)OLAYAN DESCON ENGINEERING AND CONSTRUCTION COMPANY :

RESPONSIBILITIES:

Preparation of basic engineering documents of instruments and control system like Control System Philosophy, Control System Specification (DCS, RTU, SCADA, PMS), IO list, Instrument Index, Logic Narrative, Logic Diagrams, Cause and Effect Diagrams, System Architect Diagram, Instrument Cables Block diagram, Instrument Specification Sheets, Instrument Installation Schedules, Instrument Point and line, Instrument interconnection diagrams, Instrument Cable Routing, Instrument Cable Schedule, Junction box wiring

Coordination with other disciplines for instrument related issues like input to P&ID’s, input to electrical one line diagrams input to piping layouts, control room layouts, cable tray layouts

Preparation of material and purchase requisitions, package system specifications

Technical clarification meetings with the vendor and client

Vendor documents review, packages review, details engineering design review, kick off meeting

Review the vendors' proposals, submitted technical queries, Evaluating the vendors' offers technically and Preparing the TBA (technical bid analysis) for all instrument devices

Coordinate with the Instrument Construction Manager / Project Engineer for update on status of IFC drawings, shop drawings, material receipt and construction schedule.

Supervise all instrument construction activities at site including interfaces with other disciplines and subcontractor works.

Erection and Installation of impulse pipes, junction boxes, cable trays, cable ducts, conduits, control room panels, lying of cables and installation of various field instruments.

Involved in calibration of all types of instruments such as Rosemount, Yokogawa, Honeywell, ABB,E&H transmitters, switches, temperature elements, pressure elements etc. Familiar with SMART Transmitter, Switches, Control Valves, I/P Converters, Positioners, Gauges, Gas Detectors, Thermocouples and Process Control Related Instruments.

Identify any changes to the contractual scope of work and specifications which have schedule and cost impacts and closely monitor all revised drawings and specifications and accordingly request for necessary job instructions / variation order packages.

Identify any major constraints affecting construction progress and bring them to the immediate attention of the construction manager.

Maintain a daily progress record and material utilization record and report potential shortages to the construction manager on regular basis.

Maintain peer level contacts with clients and subcontractors for the resolution of site queries, deviations, concession requests, etc.

Ensure proper preservation of the equipment in accordance with the approved project preservation procedures and vendors recommendations.

Participate in constructability review meetings with engineering, PMT, Yard, Subcontractor and Client.

Review the Project Planning Package to establish the sequence, duration and weights of activities and the corresponding manpower requirements.

Maintain marked-up as-built drawings on a daily basis

PROJECTS HANDLED:

PROJECT: INSTRUMENT WORK @ NUYYIM ASL CRUDE INCREMENT FACILITIES ( GOSP ), RIYADH

CLIENT: SAUDI ARAMCO