Moova

Coating Inspector

adhfo6@r.postjobfree.com

Mobile: +65 98597541

Block 545 #03- 87

Jurong West Street 42

Singapore-640545

Nationality: Indian Singapore PR

Married Status: Married

Profession: Coating Inspection (QA/QC Coating)

Profession Qualification:

B.Sc., Chemistry (Bharathidasan University) May 1989 – May 1992 [Full Time] Certified Coating Inspector, National Association of Corrosion Engineers-NACE Level-III Computer Skills:

MS-Office, Windows NT, 2000, XP, Windows 8, AUTO CAD Total Experience:

23 years of experience in Project QA/QC Inspection, Safety Management, Painting, Fabrication, Auditing, and other QA/QC activities. Career Profile:

Professionally qualified and experienced individual involved in Projects, Quality, Integrity Management, Health and Safety Management, Training, Analysis of Problem and effective decision making in the following jobs.

- Good interpersonal relationship skills in handling and managing projects with dedication and focus.

- Coating inspection and management for construction of offshore facilities-fixed platforms, Topside facilities, FPSO conversion, FSO new build, FPU New build,Jack up rigs and plant piping etc.

- Liaise with ABS / DNV/ RINA & BV classification surveyor for PSPC requirements for the involved projects.

- To promote & comply with applicable safety instructions and other COMPANY HSE procedures in all activities.

- To carry out work in compliance with COMPANY values and policies, relevant laws and regulations, agreed

- COMPANY priorities and objectives, COMPANY standards and procedures and good industry practices.

- To treat all information obtained during course of the work with confidentiality.

- To review and approved the painting, coating, thermal insulation and passive fire protection Engineering and Quality/Inspection documentation issued by the Contractor, Subcontractors and Vendor.

.

CARRIER HIGHLIGHTS

- To review and approve the painting, coating and Quality/Inspection documentation issued by the Contractor and Subcontractors.

- Coordinate the quality control activities linked to painting, coating and corrosion during Offshore brownfield and hook-up activities.

- Review and approved the material certificates.

- Validate the different PQT and validation of painting operators.

- To monitor the painting progress, including the closure of painting punches remaining from Contractor's yard.

- Issue or review Contractor Non Conformance reports and validate dispositions; Participate in the change management process (Technical Query, Deviation Request) with the support of MP Corrosion Engineer.

- Review and approve the different inspection reports issued by the Contractor on a daily basis.

- Witness inspection activities based on the Quality Control Plan (ITP).

- Ensure that CTR's personnel are qualified for the task they've been assigned to manage all Company quality inspections related to painting, coating and corrosion activities.

- Participate in the weekly meeting and in the issuance of weekly report and KPIs; In coordination with Head Projects QA/QC, participate in Contractor investigations of significant Quality failures.

- Ensure proper root cause analysis of Contractor Quality failures is undertaken, and conclusions are reached and corrective actions undertaken review manufacturing records books.

- Assist reporting during all phases and more particularly the close-out report and lesson learn.

- Completed 2 Jack up construction in Singapore in position as a Senior Coating Adviser with a group of inspection team.

- Completed major Jack up rigs projects as Painting Inspector for Oil & Gas Industry

(Clients includes GlobalSantaFe F&G Design, Deep Drilling Invest (DDI), Japan Drilling, Kristiansand Drilling, Awilco, PT Apexindo Duta, Seadrill BMC Design etc.

- Completed 3 conversation FPSO Projects from MODEC as a lead Coating Advisor. Managing a group of Supervisors and sub-contractors Managed inspection personnel for outside Singapore.

- Supervised and inspected Top side conversion for FPSO Ghana and FSO Ailsa for coating related works like coatings TSA, PFP &PE coatings inspections.

- Responsible for implementing FPSO Specification for Coating/Painting and insulation Inspection work during Topside Plant form and Jacket fabrication at Sembcorp Fabrication Falicity at Batam and TSA (Thermal Spay Aluminium Coating / Metalizing for Flare and Flare excess platform and one pressure vessel), Insulation (Cellular glass for Hot, Cold and Perforated stainless steel and Calcium Silicate for Personal protection, used polyguard for cold insulation and Ulva for external cladding including PFP (Passive Fire proof Coating- Jotachar) specification for offshore oil and gas facility. Including review contractor and subcontractor’s coating/painting/insulation and passive fire proof (PFP) procedure. Personal Capabilities:

- Problem Solving

- Strong planning & control skills

- Strong safety culture

- Team player with excellent communication skills

- Friendly multi-cultural attitude

- Excellent written, spoken and conversational English. Other languages are of a great advantage

- High mobility and flexibility to relocated.

CURRENT COMPANY:

Position : QA/QC Lead Engineer (Contract)

Duration : Aug 2018 to till date.

Company : SCM INTEGRATED PTE LTD.

Location : Tuas Boulevard Yard, Singapore.

Work Experience with Project:

Aug 2018- Present (SHELL VITO FPU) Project (New Construction) QA Lead Coating Inspector – Coating/ Insulation / PFP Roles and responsibilities:

- Review and submitted work procedure, Quality plan, Check lists, Inspection and Test plan

- supervise and inspect coating, painting and insulation activities verifying they are performed in compliance with project procedures, work instructions specifications and applicable standards during execution.

- Field Coordination, Insepction of Insulation in Piping, Tanks and equipment.

- Provide recommendations / solution for defects / damages identified during the inspection.

- Ensure that all required procedure qualifications are performed.

- Participate in engineering and construction reviews to secure feasible and cost efficient end result in construction

- Supervise inspectors in site team - Plan/Participate in audits / verifications as required.

- Review selected drawings and documents issued by Contractor

- Provide inputs to decisions within the discipline (i.e. NCRs, TQs, design issues)

- Supervised and inspected Top side of SHELL VITO FPU in SINGAPORE As well TSA, PFP & PE coatings verify procedure and inspections.

- Calculations the paint consumable for every individual tanks and Hull.

- Attend to weekly site safety walk as organized by the builders and make any assessment that needs improvement.

- Support engineering, during engineering deliverables development and Drawings.

- Periodic Audit on works to comply with the requirements in accordance with specification and requirements.

- Familier with SHELL DEP.

- SHELL VITO Project using JOTUN Paint Manufacturing Materials.I had more than 10 Years experienced with JOTUN PROTECTS.

Work Experience and Project:

(Feb 2017 – July 2018)

Employer FSO AILSA Modec (TOTAL PROJECT)

Period From Feb 2017 to July 2018

Position Senior Coating Advisor (JOTUN Singapore Pte Ltd) Nature of company activity New construction

Roles and Responsibilities:

- To supervise and inspect coating, painting and insulation activities verifying they are performed in compliance with project procedures, work instructions specifications and applicable standards during execution phase by:

- Verifying coating, painting and insulation works are carried out in compliance with approved project procedures, work instructions, specifications and applicable international codes and standards.

- Provide technical support, troubleshooting and technical solutions.

- Witness applied coating and painting system tests according to approved QCP.

- Performing Quality related activity on contractor/supplier work processes (e.g.: procedures, Q. plans, QCP, ITPs review);

- Monitoring subcontractors/suppliers performances during the execution phase (e.g. inspection management);

- identifying Quality problems providing the company execution team with recommended corrective and preventive actions;

- Support engineering, during engineering deliverables development.Supervision of the Contractors during the implementation of the work.

- Develop/monitor Quality Control system, including Contractors and sub-Contractors systems.

- Document, monitor, track and submit all testing and inspection records and data.

- Perform/attend needed tests on WORK SITE and in laboratory to ensure conformity on material and works according to the contract specifications.

- Document all inspection and testing in QC reports.

- Monitor daily construction activities and materials delivered to the site.

- Keep track of Variations, Changes to work and Non Conformities.

- Prepare Lesson Learnt and submit to appropriate Company focal point.

- Familiar with NORSOK M-501,NACE,ISO,SSPC and various project Standards.

- Review Technical queries and final conclusion if any site activities, Coordination with yard and Engineering personnel and Yard daily activities. Work experienced and project;

(March 2016 – Feb 2017)

Employer ENI FPSO Ghana (MODEC PROJECTS)

Period From March 2016 to Feb 2017

Position Coating Advisor (JOTUN Singapore Pte Ltd) Nature of company activity FPSO Conversion

Roles and Responsibilities:

- Inspection and control of all activities related to coating application and inspection. Attend to all inspection and ensure compliances to contract specification.

- Review procedures related to the coatings application process and make any amendments that are not in compliance.

- Report and discrepancies to main contractor by issuance of NCR/Discrepancies note to ensure corrective actions were taken and resolved.

- Review Technical Queries for any deviation / concession / modification and coordination with Engineering personnel and Vendor Contractors in day to day works / Inspection activities.

- Ensure work schedule and quality done to comply specification standards and timely completion to meet the schedule.

- Attend to close up the inspection and prepare punch ist note for contractors to take remedial action and signed off.

- Conduct inspection for coatings, TSA, PFP, PE coatings as per specification requirements.

- Calculations the paint consumable for every individual tanks and Hull.

- Attend to weekly site safety walk as organized by the builders and make any assessment that needs improvement.

- ISO 9000 Series knowledge.

- ISO 19011 audit management Sysytem.

- Good knowledge of QA/QC Construction Management Systems (Mechanical Completion Management Systems, Commissioning Management Systems)

- Knowledge of Quality Control program for Oil & Gas on-shore and off-shore construction projects.

- Discussion with all parties any technical issues and resolved the Quality / Construction

- Ability to work with and communicate effectively with subcontractors, superintendents, engineering staff, consultants and owner’s representatives.

- Ability to coordinate inspection and testing activities with subcontractor. Work experienced and project;

(Feb 2013 – Feb 2016)

Employer Lion Global Offshore Pte Ltd

Period Feb 2013 to Feb 2016

Position Coating Advisor (JOTUN)

Nature of company activity Super B Jack up Rigs

Roles and Responsibilities:

- This construction of 2 units CJ46 Jack up rigs in China and One Unit K fels B in Keppel Offshore Marine.

- Coordinating with yard production and quality control with regards to fabrication, installation and inspection activities in order to achieve work to meet the contract agreement and quality finishes.

- Attend weekly project meeting with builders to clear discrepancies, project progress and raise any issues relating to the construction activities.

- Coordinate with the project team to clear the comments raised by clients during the approval of documents related to the projects. Work closely with the Project Engineer and other Engineers in clearing the comments given by the clients in the Comment Response Sheet.(CRS)

- Review and approve the inspection test plans. Coordinate in the closure of punch lists; attend to joint inspection and FAT.

- Managed a group of inspection personnel on site of the various disciplines and attend to construction related disputes.

- Responsible for implementing Total Borneo corrosion specification for both coating, painting, insulation and Fire Protection (PFP) activities and Our role as a monitor TSA and Sealer coat in Technip as the main contractor and at sub vendor premises for Flow line TSA (Thermal Spay Aluminum Coating/ Metalizing coating at Singapore, Condensate metering skid at Emmerson sub vendor facility, Deluge Valve and Foam Fire skid both located at Tuas Singapore.

- Wood Side Energy Ltd for Trunk line System Expansion (TSEP) project, +/- 120 Km of 42” SAW pipes coats with the following coating system, Internal coats with 60 to 95 microns of COPON 2306HF solvent base epoxy paint and External with 4 to 7 mm Asphalt coating thickness, 74 and 90 mm concrete thickness at 3400 Kg/m3 as applied concrete density.

- PT Perusahaan Gas Negara (PGN) for Gas Transmission and Distribution Branch line Batam to Singapore subsea gas pipelines project +/- 200 Km of 28” SAW pipes coated with the following coating system, Internal coats with 80 to 125 microns of COPON HW 2306HF solvent base epoxy paints, External with Polyethylene (PE) and 74 to 90 mm concrete coating thickness at 3040 Kg/m3 as applied density. Marubeni-Itochu for ExxonMobil Indonesia, 5.0 km of 16” x 0.344” wall thickness (stainless steel clad and carbon steel jacket) coated with 3.0 mm polypropylene coating thickness. PT JR McDermott Indonesia for CONOCO Belanak 24”/16” and 6” 100 km gas pipelines project during external coating with asphalt enamel, concrete weight, anode installation and internal coating (COPON HF epoxy).

-

Work experienced and project;

(Aug 2008 – Jan 2013)

Employer OIL REFINERY INDUSTRY (Jurong Island)

Period Aug 2008 to Jan 2013

Position Supervisor (SK Engineering & Construction Pte Ltd Nature of company activity New Construction (Oil &Gas Industry) Roles and Responsibilities:

- Responsible for supervise and inspection of coating (surface preparation, coating inspection and test, verify the project specification of structure and piping Martials).

- Supervise and Quality control on all blasting and painting activities in yard and blasting chambers.

- Maintain good relationship with paint inspectors and owner inspectors.

- Must be able to multi-task when help required by department head.

- Monitor the Company’s painters when assignment given to them work together to achieve common goal for the achievement.

- Ensure that all required procedure qualifications are performed.

- Ensure that fabrication documentation is issued by Contractor in accordance with requirements.

- Ensure completion for handover to commissioning. Work experienced:

(Jan 1998 – July 2008)

Employer JURONG SHIPYARD

Period Jan 1998 to July 2008

Position Surface Treatment Supervisor

Nature of company activity Blasting and Coating Inspection Roles and Responsibilities:

- Ensure that the activities and scope for construction within surface protection is planned, qualified, performed and documented in accordance with the contract specifications.

- Highly focus on cost efficient constructions.

- Monitor work progress against plans and schedules and highlight areas of concern and possible corrective actions

- Participate in engineering and construction reviews to secure feasible and cost efficient end result in construction

- Ensure that Contractors site personnel are qualified in accordance with project requirements.

- Supervise inspectors in site team - Plan/Participate in audits / verifications as required.

- Ensure that all required procedure qualifications are performed.

- Review selected drawings and documents issued by Contractor

- Provide inputs to decisions within the discipline (i.e NCRs, TQs, design issues)

- Ensure that systems and equipment are protected and preserved

- Ensure that fabrication documentation is issued by Contractor in accordance with requirements.

- Ensure that all required fabrication records are prepared.

- Report deviations and highlight problem areas to Construction manage

- Ensure completion for handover to commissioning.

- Participate in area / system punch out as required and monitor status.

- Maintain good relationship with paint inspectors and owner inspectors.

- Must be able to multi-task when help required by department head.

- Monitor the Company’s painters when assignment given to them work together to achieve common goal for department.

- Supervisory and Quality control on all blasting and painting activities in yard and Chambers.

- Monitor contractor manpower, schedule and planning of work activities PERSONAL DETAILS:

Father’s Name : C.PALANISAMY

Gender : Male

Nationality : Singapore Permanent Resident (Indian) Date of Birth : 01.02.1971

Marital status : Married

Languages Known : English (Fluently Speak and written) Tamil and Malay

Expected Salary : USD 750

License : Class2B & 3 Licenses (Singapore)

Notice Period : One Month Notice

DECLARATION:

I hereby declare that the information furnished above are true and correct to the best of my knowledge and belief.

Yours faithfully,

Palanisamy Moovarsan

Contact this candidate