Sivaraman K B.E Aeronautical Engineering (****)
**, ********** ******,*************,
Chennai-600073.
E-mail: adh96b@r.postjobfree.com
Mobile: +919*********, +918*********
Objective:
I aim to be an able and learned professional with 7+ years of experience as a Planner, thereby contributing positively towards the growth of my esteemed organization and paving way for personal and professional career growth.
Professional Experience:
DUTIES & RESPONSIBILITIES
Planning and prioritizing operations to ensure maximum performance and minimum delay
Order the Required Item and Track them to get in required time.
Coordinate between Client and Production team for smooth processing.
Design the requirement using AUTOCAD Tool and continue the process based on requirement. Calculate the accurate material based on design for complete project.
Discuss inspection results with those responsible for products, and recommend necessary corrective actions. Discard or reject products, materials, and equipment not meeting specifications.
Observe and monitor production operations and equipment to ensure conformance to specifications and make or order necessary process or assembly adjustments.
Prepare and submit status and performance reports. DUTIES & RESPONSIBILITIES
Designation: Senior Engineer (Production Planning)
Upon collecting check package after its review from Production Planning office, segregate task cards as per trades, zones and check sequence. Check sequencing starts from pre- docking de-paneling (Access Panel Open / Close List / Task Card) (Issued by Technical Services Dept.) until close up, functional, Engine ground Run, and Certificate of Release to Service. Load task cards onto Job Card Loading Board in accordance to Trades, zones and check sequence. Check sequencing of cards will be done as per phase, zone, trade and day to day basis with the consent of CM.
S.No. Company name Dept./Designation
Period of
working
1. DSG Manufacturing Pvt Ltd PLANNING ENGG
JULY 2017-
JULY 2019
S.No. Company name Dept./Designation
Period of
working
1. GMR, Hyderabad
SENIOR PLANNING
ENGG
DEC 2016-
MAY 2017
Upon receiving the accepted and approved task cards, load in the ERP and activate ERP before commencement of maintenance task.
To maintain and update check progress through progress report, check cards accomplished, major events, AOG situations, AOG spares etc. (refer Customer Minutes of Meeting and then send Daily Progress Report along with IRC Listing)
Monitor critical activities that could affect the check and take corrective action.
Check completed cards after AME has signed and stamped. Accept and control completed task cards and Inspection Report Cards (IRCs) into completed package. Check that all tasks in task cards and Inspection Report Cards (IRCs) are accomplished by ensuring all entries are completed and signed, dated and approval stamp applied. Ensure legibility of entries and approval stamp number.
S.No. Company name Dept./Designation
Period of
working
2. AIRWORKS INDIA ENGINEERING PVT LTD., HOSUR
JUNIOR PLANNING
ENGG
JAN 2014-
NOV 2016
WORK EXPERIENCE
Air Works India Engineering Private Limited :- 16-Jan-2014 to (Present Date) Air Works is India’s first independent Airline MRO with approvals from regulatory authorities EASA, DGCA, CAAS, QCAA, CARC, GCAA, CAASL, GACA, for approvals of handling Base and line checks for various Aircraft types. Base check approvals for handling Airbus A319/A320/A321, Boeing 737-NG series (600/700/800/900/900ER), and ATR 42/72 family of Aircrafts and Line Maintenance approvals for handling Boeing-777F, Boeing-787, Airbus-A320 & A330 Normal & Cargo.
DUTIES & RESPONSIBILITIES
Designation: Junior Engineer (Production Planning)
Review maintenance/ component input work packages received from Customer to identify material requirements, tooling and equipments and any materials or tool shortages, coordinate with Procurement Team for provisioning of the same .
Coordinate with Avionics/NDT/Structures for shop work activities and prepare interim documents in order to ensure that they are properly informed of the requirements, tasks, component/material provisioning and generate daily work status report to concerned managers.
Co-ordinate with Licensed Aircraft Maintenance Engineers for smooth check progress and with Stores Inspector for timely provisioning of spares and to monitor progress & facilitate ongoing maintenance inputs by providing timely loading of spares & paperwork for non routine findings, as necessary.
Final audit of work package after completion of Maintenance and to ensure all Routine Task Cards, NRC’s, Customer work request work orders are tallied before CRS is signed and after CRS closed, ensure all regulatory requirements are met, close the visit-package in the ERP system. (Ramco ERP System).
Review the daily checks activities and prioritise & sequence for optimum productivity. Allocate Planning Assistants in order to ensure effective support and utilization for different tasks relating to daily check e.g. spares collection, document preparation and return items etc.
Responsible for the life cycle of each Maintenance Project, including pre-input and daily production meeting, customer co-ordination for additional work approval and rotables/spares availability.
PROJECTS HANDLED
Maintenance planning projects for Airbus A319/A320/A321 (Customer GOAIR & Kingfisher, Mainly C-Checks).
Maintenance planning projects for Boeing737-700BBJ (Customer-Boeing) SB’s includes VTC mod compliance for 03 Aircrafts.
ATR72/42 C-Checks, 12 yearly & Re-Delivery Checks for (Customers- Kingfisher, Druk Air, Air Mandalay, Swift Air, AIR KBZ).
Handled Re-Delivery Check for Jet Airways Boeing 737-700 & Boeing 737-800 Aircrafts. S.No. Company name Dept./Designation
Period of
working
3. SRI JAI INDUSTRIES, CHENNAI. JUNIOR ENGG
APR 2011-
DEC 2013
Job Responsibilities:
Identification of Potential Vendors for Items.
Floating Enquires, Quotation selections and Purchase Order Processing’s for Domestic Purchases.
Handled import purchase orders
Coordination with freight forwarders.
Oversaw Raw materials inventory working with vendors to communicate quality and delivery issues.
Communicate requirements to suppliers and subcontractors.
Negotiating for material procurement at lowest cost without compromising on quality
Maintaining stock verification, Updating and conducting monthly stock verification.
Involving and aiding of complete Process from Raw Material Procuring, manufacturing and dispatch.
S.No. Company name Dept./Designation
Period of
working
4. AIRWORKS INDIA ENGINEERING PVT LTD., HOSUR
Engg services /
GE Trainee
SEP 2010-
MAR 2011
Job Responsibilities:
ATR 72/42 series of Aircrafts
AIRBUS A319/320/321 series of Aircrafts
Implementing and assisting in scheduling of approved work package as per sequencing of tasks & ensure/follow up with maintenance on day-to-day work progress.
Capturing of estimated and actual man hours for routine and non-routine tasks.
Monitoring of routine and Non Routine tasks (NRC) and its materials.
Ensure the pick list Spares were issued to respected Zones, upon the Zonal in-Charge acceptance.
Return all unused parts & materials with proper Documentation & packing to Engineering material Section. Return all unused parts & materials with proper Documentation & packing to Engineering material Section.
Monitoring and providing of day-to-day status reports on work progress of checks, highlighting any significant deviations from plans.
Monitoring of Non-Routine tasks and Material requirements. In addition to the above, I have worked on ERP (RAMCO Aviation Systems) at AIRWORKS India Engineering Pvt. Ltd.,
Education:
Qualification College/University Year Score %
MBA -Production Management Madurai Kamaraj University-DDE 2012 60 B.E. Aeronautical Engineering
Infant Jesus College of Engineering,
Tirunelveli
2010
66
Higher Secondary
Course Examination
S.R.G.D.S. Matriculation Higher Secondary School 2006 65 Matriculation Examination
10th Standard
S.R.K.M.S. Matriculation School 2004 65
CERTIFICATIONS :
Human Factors in Aircraft Maintenance
Fuel Tank Safety Phase 1 & 2
Electrical Wiring Interconnection System (EWIS) from Academy of Aero Technical (Part 147 by UK Civil Aviation Authority)
Technical Skills:
Design & Modelling: AUTOCAD,Unigraphics NX6, CATIA V5R19
General: MS-office
Personal Details
Name : Sivaraman.K
Date of Birth : 19-04-1989
Father's name : Kannu.K
Sex : Male
Marital Status : Married
Languages Known : English, Tamil
Nationality : Indian
Permanent Address : No 7, Pavala kundru otha vadai Street, Tiruvannamalai - 606601.
Present Address : 19, Kalidhasar Street,Kamarajapuram, Chennai-600073.
Strengths:
Optimistic, hard working.
Like to take-up new challenges and to work under pressure
Can adapt to any kind of environment so quickly
Good MS office & Adobe Professional applications skills.
Pro-active and self motivated
Declaration:
I hereby declare that all the information furnished above is true to the best of my knowledge. Date:
Place: Chennai (Sivaraman. K)