Dagdu Laxman Devhade
India - +91-996*******
Seeking a position to utilize my skills and abilities that offers professional growth while being resourceful, innovative & flexible.
Dynamic, result-driven Instrumentation Engineer with over 4.5 years of extensive experience in project management, execution, operation and maintenance of EPCM type projects from Site mobilization to Commissioning, Erectioning in the field of Process, Oil and Gas & Power Application Domain Industries. EXPERIENCE: ELECTRICAL AND INSTRUMENT PROJECTS FOR PROCESS INDUSTRIES.
Preparation of detail engineering of project documents
Experience on all type of Field Instruments Selection, manual valve selection (Flow, Level, Pressure, Temperature, limit switches, control & on off valves) etc.
Resolving technical issues with brilliance in reviewing the P&ID, Cause, effects diagrams, Logic buildings DCS, PLC, SCADA, Fire and Gas, Analyzers and Control Loops system.
Experience on preparation of Instruments Installation, calibration, troubleshooting, check list, technical documents such as test reports, calibration reports etc.
Result-oriented, confident, team building, ability to absorb and master concepts quickly; good planning, organizing and monitoring skills
Ability to Manage, execute and lead multiple projects in Real time dynamic simulation of Process industry and DCS platform.
Expertise in Erection, testing, Commissioning works of Boiler- structure, Pressure parts, non-pressure parts, Ducting, and piping, process Instrumentation. Preventive, shutdown & breakdown Maintenance of Boiler & its auxiliaries (AUX/HRSG/AFBC/FM/TG/SW) - Boiler-Pressure Parts, Non-Pressure Parts and Equipment’s such as Fans, Motors, All panels, Dosing pumps, Coal feeders, Duct Furnace, evaporator, economizer, Super heaters etc.
Organization: Thermax Babcox and Wilcox Energy Solution Pvt. ltd (B/H Division) Designation: Execution Engineer – Projects (Electrical and Instrumentation)
Duration: Sept 2018 - July 2020/Sept 2016 – Jan 2017 TBWES Pvt. ltd.(Pune): An Engineering company manufacturing of Boiler Manufactures in the Country providing Steam Generation Solution for Process and Power needs on offer are a range of options covering Combustion of various solid, liquid and gaseous fuels, heat recovery from gas turbine/engine exhaust, waste heat recovery and fired boilers &heaters for various industrial processes and application. It also offers renovation and modernization along with upgrades for old boilers and process furnaces Key Roles:
Review of detail documentation: Datasheets, selection, Instrument Index, Interlock list, set point list, Cable & JB Schedule, PLC IO list, schedule, electrical load calculations, control philosophy, air & power consumption,
Study of Hook up hardware Bom Cable tray schedule, Air header schedule, Instrument Location plan, JB location Plan, control philosophy, air & power consumption, Cable Tray Layouts, Instrument Tubing Layout, Instrument Cable Layout, Cable Routing and Various instrumentation deliverable.
Review of BOQ, Material delivery scheduling, Material in-take and Inspection, Dispatch planning. Technical Comparisons, Technical Discussions, technical recommendation.
Knowledge of Industrial Codes and Standards: ATEX, IP codes, CE, etc.
Preparation of Shutdown & Start up Logic Diagram, Interlock Logic Building and testing, Control System Architecture,
Preparation and modification: Electrical drawings, panel GAD’s, P&ID, PFD, cause & effect diagram, logic diagram. Schematic and layout diagrams.
Co-Ordination with client for erection & commissioning.
Plant commissioning: preparation of P&ID drawing, IO index, IO schedule, hooks up drawing, JB Location. Preparation of Cable Tray rout, cable schedule, JB schedule, instrumentation location plan, GA drawings etc.
Developed startup logic, Sequential logic, Interlock Logic, Safety logic, FBD Block building, ladder logic development of PLC/SCADA for smooth operation of plant execution.
Installation & Calibration of sensor / transmitter / gauges / Control valves/Positioners/IP converters, proximity sensors, pneumatic sensors & switches and all types of actuators
Installation, Testing, Charging & Commissioning of PCC/MCC, Incomer (ACB/MCCB) CT PT Settings.
Earth pit testing. Megger of motors, cables & MCC panels
Hands on experience ABB and Siemens PLC AC drives trouble shooting.
Calibration of all related field instrumentation and Electrical equipment.
Good Experience in Erection, Testing, calibration and commissioning of Transmitters, Control valves, power cylinders, Actuators, Field instruments and all type of gauges and Switches.
Good Understanding and Review of P&IDs, Instrument Specifications, DCS/PLC I/O, Panel layout and Wiring diagram, BOM, calculations and other Engineering documents from consultants/Vendors for I&C equipment. Conduct site surveys of facilities to establish and identify the actual requirements.
Calibration, Erection and commissioning of all Pressure, level, and Flow Field Instruments, pneumatic Valves, Motorized Actuators, and Digital Meters in Instrumentation Systems.
Supervision on various Instrument activities, daily routines, failure analysis & Preparation and execution of Safety Critical Instrumentation program.
Coordinate with other engineers during the project development and execution of the job.
Commissioning, quality assurance, punch listing to meet the requirement and taking handover of Instrument & control system.
Assists in expediting of vendor data and drawings, and of equipment/material deliveries like FAT, Design coordination. I/O List preparation.
Laying Inspection& Loop checking of all Power, control, signal & Communication cables.
Knowledge of MCC, ICP, PLC & VFD panel, MTP, TRCC, MCC, PCC, RDB Panels GA, SLD etc. for Boiler & ESP feeders
Review of Control schematic for different types of feeders including VFD & MCC.
Review of Interconnection chart of control cables
Earthing layout drawing.
Preparation of System & Marshalling Architecture Drawing with detailed interconnections between different system & electrical components.
Selection of Electrical items as per process requirements.
Cable Meggapes, Motor Meggar, No load/Full load Trials
System Power Supply loading calculations, System Hardware allocation: Processor, I/O Modules, and Communication.
1. NTL Limited, Kashipur (Uttarakhand): Successful Erection and pre-commissioning of 60 TPH Coal based AFBC Boiler.
2. Athani Sugars Ltd, Athani (Karnataka): Successful Erection of Instruments & Pre-commissioning for bagasse based 145.5 TPH TG Boiler
3. ONGC Hazira (Gujrat): Successful Erection & modification revamp work of field instruments for 37.2 TPH TBWES (FM) Boiler
4. VSSSK Ltd Temburni (MH): Erection & Pre-commissioning of cliental based 46.2 TPH Coal fired Spent Wash Boiler
5. Reliance Industries Ltd, Jamnagar – J3 expansion project. (C2complex Captive Power Plant Area): Successful erection, pre-commissioning, Vendor documentation & commissioning assistance for AUX & HRSG each of 275 TPH Boilers.
Organization: KEC Pvt. Ltd, Mathura (UP)
Designation: Site and Planning Engineer – Projects (Electrical and Instrumentation) Duration: Aug 2017 – Apr 2018
Clients: Yokogawa India Ltd
Location: Mathura Refinery, Mathura IOCL(Marketing Division) Projects: CCTV
Installation of different types of field cameras such as BU, PTZ, DOME& EXISTING at IOCL areas.
Termination of all loop wiring of Field instrument &Control Panel as per Terminal Schedule
Checking &laying JB cables as per JB schedule& Cable Schedule
Ensure Earth pit Testing, Megger Testing, Loop Checking, Cable Laying, Termination, Glanding.
Conducting SAT with End User.
Troubleshooting, testing & commissioning field cameras through communication cables interfacing along with PLC system.
Organization: IB Automation Engineering Projects Pvt. Ltd, Pune Designation: Site Engineer – Projects (Electrical and Instrumentation) Duration: May 2014 - Apr 2016
Clients: GE (Oil &Gas)/Chemtrol Industries Ltd
Location: Mathura IOCL Depot (Marketing Division), HPCL Akola (MH), Agra IOCL Depot Projects: PLC based Terminal Automation System/Hydrocarbon Gas Detection System IB Automation
Co- ordination with clients
Erection, Installation & Calibrating a Field Instrument& Control Panel
Termination of all loop wiring of Field instrument &Control Panel as per Terminal Schedule
Laying all field instrument cables &Panel monitoring cables as per as cable layout
Checking &laying JB cables as per JB schedule
Erection & Installation, Commissioning of Field Instrument Such as OPD, PTD, Radar gauge, PT, LT, FT, TT, LS, Jockey Panel, FAP etc.
Ensure Earth pit Testing, Megger Testing, Loop Checking, Cable Laying, Termination, Glanding etc.
Conducting SAT with End User
Self-motivated with technical and managerial skills.
Effective team player with strong communication and interpersonal skills.
Smart worker and positive result oriented.
Excellent work ethics, quick learner and team oriented. PROFESSIONAL QUALIFICATION
Computer basics, networking concepts etc.
PLC Programming (Allen Bradley, Siemens)
SCADA Monitoring & Interfacing (Rs view, Siemens (wincc))
HMI web display builder (wincc flexible, Honeywell EPKSR410.1)
DCS (Honeywell EPKS R301, R400, R410)
Certificated Industrial Automation from TAACT Automation, Nasik in Sept-2013 to Dec-2013 EDUCATION
2013 B.E. (Instrumentation and Control) from Gangamai College of Engineering, Dhule, affiliated to NM University. Secured 56%
2006 HSC (Science) from A.P.P Junior College Naigaon Tq. Mehkar Secured 66.17%
2003 SSC from M.E.S. High School, Mehkar. Secured 60%
Date of Birth: 25 June, 1988
Marital Status: Married
Address: Chankhore colony, Mehkar-443301, Dist. Buldana. Nationality: Indian
Languages: English, Hindi, Marathi.
Hobbies: Travelling, Cooking, Reading, Singing
Notice Period: 30 days
I declare that the information given above is complete, true and accurate. Any false particulars or suppression of material facts will render me liable to disqualification and if appointed to dismissal without notice from your company.
Dagdu L. Devhade