Mario Alberto Monteiro Cuña

RESUME

INDIVIDUAL DATA

First and last name: MONTEIRO CUÑA, Mario Alberto

Nationality: Argentina

Place of birth: Winifreda, La Pampa

Date of birth: October 6th, 1983

Address: Gobernador Anaya N 4500, lote 176

Location: Neuquén Capital

Province: Neuquén

Cell phone: (54-029*-*********

Email: adgrhv@r.postjobfree.com

EMPLOYMENT HISTORY

(2019-2020) Employed at Pan American Energy Company Position Held: Chemical Treatment, Laboratory, Corrosion Coordinator and Cathodic Protection. Tasks performed:

- Responsible for the Chemical Treatments, Laboratories and Corrosion team in charge of all chemical treatments from sub-surface and surface in well, gas, water and oil treatment in plants, batteries and compressors, responsible for the sale of fluids in specification.

- Corrosion monitoring and control in surface and sub-surface equipment.

- Definition of chemical dosages as bactericides, inhibitors, sequestrants, flocculants, demulsionants, surfactants, coagulants, etc.

- Generation, monitoring and evaluation of plans to mitigate corrosion of facilities.

- Calculation of concentrations/costs, control and monitoring of chemical treatments.

- Monitoring of bacteria, sulphides, sulphates, iron, hardness, dissolved gases, waste, etc.

- Chemical-Mechanical Cleaning of Oil Pipelines and Aqueducts.

- Generation of corrosion, incrustability and paraffin deposition maps.

- Management of contracts, specifications and tenders for the supply of chemical products and analysis laboratory.

- Design, implementation and maintenance of cathodic protection systems in tanks, pressure vessels, ducts, buried structures, etc.

- Responsible for internal laboratories where oil, water and gas analysis are performed.

- Well corrosion profile analysis and metallography selection.

- Responsible for the inspection of chemical products and laboratory contracts.

- Definition, elaboration and follow up of Capex and Opex budgets of the sector. Outstanding project:

Reduction of corrosion rates and increase of production in non-conventional high-pressure CO2 and high GOR wells using thermosetting dual action chemical injection via capillary: Corrosion inhibitor/foamer.

(2017-2019) Employee at YPF Company Position Held: Head of Integrity and Corrosion Engineering

(2014- 2017) Employed in YSUR company (Ex Apache Corporation), Tasks performed:

- Head of the Integrity and Corrosion Team for YPF Neuquén. Responsible for the design and implementation of the integrity and corrosion management (Assets involved: 900 wells, 2100 kilometers of pipelines, 80 production facilities, 260 tanks and 160 pressure vessels).

- Coordination and Development of the Risk Based Inspection (RBI) Program, based on API 570/579, API 580/581.

- Equipment design and repair according to International Standards: API 650/653, ASME B31.4, B31.3, B31.8, NACE RP/MR.

- Elaboration of technical documents required by the Argentine government authorities (NAG- 100 and Resolutions 120E, 785 and SERN 230, 004, 347).

- Elaboration and maintenance of cathodic protection systems in Tanks, Pressure Vessels, Ducts, Buried Structures, etc.

- Repair of coating failures, failure analysis, selection of coatings and materials.

- Analysis and update of risk matrices ( HAZID, HAZOP).

- Elaboration of the preventive and predictive maintenance program using SAP PM.

- Elaboration and execution of the Pre/Post Test plan in safety valves.

- MFL / US internal piping and tank inspections by MFL and robotic methods.

- Continuous review of ESP antifouling and MP corrosion treatment, taking into account Trend Analysis and Pulling history.

- Definition of chemical dosages such as bactericides, inhibitors, sequestrants, flocculants, demulsifiers, surfactants, coagulants, etc.

- Generation, monitoring and evaluation of plans to mitigate corrosion and integrity of facilities.

- Calculation of concentrations/costs, control and monitoring of chemical treatments.

- Monitoring of bacteria, sulphides, sulphates, iron, hardness, dissolved gases, residuals, etc.

- Chemical-Mechanical Cleaning of Pipelines and Aqueducts.

- Generation of corrosion, incrustability and paraffin deposition maps.

- Design and analysis of pipeline diagnostics using Software PIPESIM, KIPU.

- Analysis of corrosion profiles of well and selection of metallography.

- Management of contracts, specifications and tenders for the supply of chemical products and analysis laboratory.

- Responsible for Chemical Products and Laboratories contract inspection.

- Definition, preparation and follow-up of Capex and Opex budgets for the sector.

- Generation of work orders using PM module (SAP). Outstanding project:

Increased production of more than 500% in non-conventional gas wells with high GOR with hydrocarbon percentages of more than 90% using capillary action chemical injection.

(2013- 2014) Employee at CAPSA (Compañía Asociación Petrolera S.A), Position: Corrosion, Integrity, Chemical Treatment and Process Engineer at Diadema Chubut. Tasks performed:

- Corrosion control and mitigation, production water treatment, cathodic protection, material selection, chemical treatments and anti-corrosion coatings.

- Generation of failure reports and root cause analysis (RCA).

- Design and maintenance of cathodic protection systems in Tanks, Pressure Vessels, Ducts, Buried Structures, etc.

- Elaboration and execution of non-destructive inspections in pressure equipment, tanks, ducts, etc.

- Elaboration of the preventive and predictive maintenance program using SAP PM.

- Management of investment projects and follow-up, budget management.

- Management of contracts, specifications and tenders for the supply of chemical products, analysis laboratory, cathodic protection and equipment inspection.

- Generation of technical reports on evaluations of applied chemical treatments and proposals for new chemical treatments.

- Design of specifications for the chemical and mechanical cleaning of liquid and gaseous hydrocarbon transport ducts.

- Monitoring of corrosion mitigation strategies in oil and gas production facilities, cathodic protection, atmospheric corrosion and coating selection and inspection.

- Responsible for the laboratory, monitoring of bacteria, sulfides, sulfates, iron, hardness, dissolved gases, waste, etc.

- Chemical Treatments, Laboratories and Corrosion covering equipment from sub-surface and surface in well, treatment of gas, water and oil in plants, batteries and compressors, responsible for the sale of fluids in specification.

- Responsible for Inspection of Chemical Products and Laboratories contracts.

- Definition, elaboration and follow up of Capex and Opex budgets of the sector.

- Project of tertiary recovery with nanopolymers: monitoring of physical-chemical parameters of water quality and polymer, definition of chemicals to improve these parameters. Outstanding project:

Reduction of pulling interventions in wells with causes associated with corrosion in the bottom, from 5 interventions per year to 1 intervention every two years. We used microencapsulated chemical products at the bottom of the well that had dual action: Corrosion Inhibitor and Bactericide.

(2009-2013) Employee in the company YPF S.A. Position: Corrosion and Integrity Engineering, in Las Heras and Los Perales Santa Cruz. Tasks performed:

- Responsible for the activities of Opening, Inspection, Repair, Modification and Alteration of Tanks (under API Standard 653) and Pressure Vessels (under API Standard 510).

- Coordination and follow up of Non-Destructive Testing crews.

- Design and maintenance of cathodic protection systems in Tanks, Pressure Vessels, Pipelines, Underground Structures, etc.

- Continuous revision of the antiscalant treatment of RSP and corrosion of MP, taking into account Trend Analysis and Pullings history.

- Corrosion monitoring and control in surface and underground equipment.

- Definition of chemical dosages as bactericides, inhibitors, sequestrants, flocculants, demulsifiers, surfactants, coagulants, etc.

- Generation, monitoring and evaluation of plans to mitigate corrosion and integrity of facilities.

- Calculation of concentrations/costs, control and monitoring of chemical treatments.

- Monitoring of bacteria, sulphides, sulphates, iron, hardness, dissolved gases, residuals, etc.

- Chemical-Mechanical Cleaning of Pipelines and Aqueducts.

- Implementation of dosing in WTP, OTP and WIP.

- Inspections by intelligent scrapper.

Outstanding project:

Compliance with the installation program of cathodic protection to water and process hydrocarbon storage tank bottoms by means of printed current injection. The objective of protecting the bottoms of 12 tanks was met.

(2008-2009) Employee in the company EPSILON S.R.L Position held: Oil, water and gas analyst. Tasks performed:

- Control of Physical-Chemical analysis of water for monitoring corrosion, incrustation and microbiological contamination of the salt water injection systems, purge and fresh water for secondary recovery.

- Control of incrustations and determination of densities in producing wells. Control of emulsions in batteries, PTC and wells. Selection and ranking of different chemical products.

- Control of complete analysis of oil, viscosity, density, paraffins, asphaltenes, etc. Control of environmental analysis, heavy metals, BETEX, solids control analysis, production analysis, chemical quality analysis, etc.

Outstanding project:

Rewrote all the analysis techniques for oil, water and gas, including improvements in them, more modern methods of analysis, more appropriate instrumentation, quality of reagents, etc. Start-up of the oil and water laboratory in Valle Hermoso, PAE. ACADEMIC BACKGROUND

(2019) Postgraduate course in Maintenance Management and Engineering, Reliability and Integrity, Universidad Austral.

(2009) Master in Production Engineering, YPF-REPSOL: Coursework: Mechanical Pumping Electro submersible Pumping Progressive Cavity, Hydraulic and Jet Pumping Reservoir Fluids Properties Waterflooding Natural Emergence, Gas Lift and Plunger Lift Operation of Surface Facilities Fluids Measurements Oil, Gas and Water Treatment

- Corrosion Integrated Production Management Nodal Analysis, Networks, Balances Well Test Design and Analysis Production Management Economics, Investments and Costs

(2007) Bachelor's Degree in Industrial Chemistry, Universidad Nacional de la Pampa.

(2001) Bachelor, Cristo Redentor Private Institute, Winifreda La Pampa. PUBLICATIONS

Production of xilo-oligosaccharides by chemo-enzymatic treatment of agricultural by-products. Publicado en la revista llamada BioResources, editada en la Universidad de Carolina del Norte, USA. Ver el artículo en el siguiente link:

https://ojs.cnr.ncsu.edu/index.php/BioRes/article/view/BioRes_06_4_5050_Mazzaferro_CB_P rod_Xylooligosacch_ChemoEnzymatic_Ag

ATTENDANCE TO COURSES AND CONGRESSES

(2015) ISO 14001 (2014) Basic and Advanced Autocad. (2014) Project creation and monitoring, advanced.

(2013) Course of external protection of Casing, landpipe and selection of materials for corrosive environments.

(2011) CP1 Cathodic Protection, certified by NACE International N 36153, dictated in the IAPG, Bs As.

LANGUAGES

English (oral and written) Intermediate level. Currently studying IELTS COMPUTER LITERACY

Spreadsheet, Database, Word Processing, Internet, Office Package, AutoCAD, Project, SAP PM Module Management, JD Edwards Management, GIS.

Contact this candidate