SEDRICK UMALI DE MESA, ECE
Mobile
Email address
adgpft@r.postjobfree.com
Current Address:
Al Rigga, Deira, Dubai,
United Arab Emirates
Personal Information:
Date of Birth:
07 June 1987
City and Country of Birth:
Malvar, Batangas
Philippines
Passport No:
P1035399A
DOI – 05/12/2016
DOE – 04/12/2021
Marital status:
Single
Visa Status:
Tourist / Visit Visa
Visa Validity:
10th of January 2021
Nationality:
Filipino
Language:
English, Tagalog
References
will be available upon
request
CAREER OBJECTIVE
To utilize my technical skills as quality engineer for achieving the target and developing the best performance for the growth of the organization. I would like to implement my innovative ideas, skills and creativity for accomplishing quality activities.
WORK EXPERIENCE
Quality Management Representative (QMR)
Techno Rig Group FZCO
10th of April 2017 up to 07th of June 2020
PO Box 263083, National Industries Park, Jebel Ali, Dubai, United Arab Emirates
GENERAL FUNCTION
To undertake the responsibilities of Quality Management Representative including documents review, implementation and control to be in compliance with ISO / API standard requirements.
DUTIES & RESPONSIBILITIES
Ensure that the company's QHSE Integrated Management System processes are established, implemented and
maintained.
Report to Top Management on the IMS performance and where improvements are needed.
Ensure all company policies, procedures, work instructions are documented in a clear, simple and concise manner.
Train and communicate all company personnel on the documented company policies.
Identify relevant legislative requirements and maintain all legal and authority registrations.
Ensure the initiation of mitigation and contingency action(s) to minimize the likelihood of the occurrence of non-conformities via risk assessments.
Conduct internal quality, health and safety and environmental
(QHSE) system compliance audits.
Ensure personnel have received appropriate training and are assessed as competent to perform tasks.
Ensure the promotion of awareness of customer requirements throughout the organization.
Maintain the company library of compliance resources including standards.
Conduct 5-Whys root cause analysis for non-conformity occurs
(internal/customer complaints) and be able formulate corrective and preventive action to be implemented.
Prepare purchase order for the materials to be purchased and conduct incoming inspection of these purchased materials including review of relevant documentations such as conformity and material test certificates.
Page 2 of 4
SKILLS AND
CHARACTERISTICS:
Team player
Can work in a multi-
cultural environment
Able to handle
multitasks and prioritize
tasks
Good communication
skills
Can lead and handle
people well
Dedicated and highly
organized
Possess considerable
technical, analytical,
and reporting/
presentation skills
Willing to be trained
Willing to work under
pressure
Hardworking
Can deal with
different kinds of
people
Computer literate (MS
Word, MS Excel and
MS PowerPoint
application)
JOB SPECIFICATIONS:
Capable of making
some implementing
procedures for
compliance on
industry for
maintaining quality
management system
in place
Capable of dealing
and negotiate with
customers and
suppliers for work
related activities
Knowledgeable in
Maintenance
Management and
Calibration System
Knowledge in 7
Quality Control Tools
Knowledgeable in ISO
Quality Management
System Standards ISO
9001:2015 and API Q1
9th edition.
Knowledgeable in API
Spec 4F, 4th edition
(Specification for
Drilling and Well
Servicing Structures)
Involve on the preparation, review and implementation of process documents including job routers and quality inspection and test plans.
Review and summarize requirements submitted by
Outsourced Suppliers including qualification, calibration certificate of measuring equipment to be used, materials and consumables shelf life and reference procedure/s related on activity to be performed.
Review and accept the final submitted inspection report/s from outsourced Suppliers related to activity being performed within the facility.
Monitor and ensure measuring equipment calibration, review and approve details of calibration certificates received including accuracy and acceptance criteria provided by Calibration suppliers.
Internally managed and maintained the changes of Quality Management System which are planned and implemented.
Conduct in between process (as required) and final inspection to confirm the compliance on the customer provided requirements before product release.
Quality (QA/QC) Engineer
NTS Middle East FZCO
28th of September 2014 to 23rd of January 2017
PO Box 262210 Street 621, R/A 5, Jebel Ali Free Zone, Dubai, United Arab Emirates
GENERAL FUNCTION
Make sure that necessary processes and procedures are in place to provide and efficient, safe and reliable service to client.
DUTIES & RESPONSIBILITIES
Ensure that all QMS related activities are implemented and maintained.
Provide the required support to the office/workshop to implement any new processes or procedures.
Coordinate with other third parties to monitor and maintain company policy and procedures.
Assist in monitoring the implementation and effectiveness of quality inspection activity. Conduct final inspection and prepare documentation packages as per client requirements.
Conduct monitoring on the implementation and effectiveness of receiving and dispatch activities.
Handles over-all control of measuring equipment / gauges and its calibration activities. Coordinate in-house calibration / external calibration as necessary.
Perform root cause analysis for non-conformity occurs
(internal/customer complaints) and be able formulate corrective and preventive action to be implemented.
Conduct Internal Auditing as per ISO 9001:2015 requirements for verification of effectiveness of Quality Management System. Perform Suppliers’ Audit as necessary on periodically basis.
Conduct monitoring of raw material inventory (company owned/customer supplied).
Page 3 of 4
Knowledgeable in ISO
HSE Standards such as
ISO 14001:2015
Environmental
Management System
and ISO 45001:2018
Occupational Health
and Safety
Management System
AFFILIATION:
Institute of Electronics
Engineers of the
Philippines (IECEP)
Member
2008 up to present
CERTIFICATIONS /
ACHIEVEMENTS:
Get the Techno Rig
Group FZCO ISO
9001:2015, API Spec
Q1, 9th edition and API
Spec 4F, 4th edition
Certifications
Act as Quality
Management
Representative (QMR)
on NTS Saudi Co. Ltd.
to get the ISO
9001:2008, API Spec
Q1, 9th edition and API
Spec 7-1 Certifications
Certified Internal
Auditor for ISO
9001:2015 and API
Spec Q1, 9th edition,
ISO 14001:2015 and
ISO 45001:2018
Management System
Standards
Certified / Trained Risk
Assessor to perform
verification and
assessment of risks
which have directly
impact on product
quality and delivery
Certified / Licensed
Electronics Engineer
(Registration Date:
April 21, 2010)
Consistent Deans’
Lister (Tertiary Level)
from 2004 to 2009
Yazaki -Torres
Manufacturing Inc.
Scholar from 2004 to
2009
Consistent Honor
Student (Primary and
Secondary Level)
Accomplish review and assessment of risks and provide mitigation and contingency plans to lessen / eliminate its effect.
Assist on purchasing process from inquiry, placing of orders, suppliers’ follow-ups and incoming inspection of received of items in-house.
Conduct arrangement of air/sea shipment collection and delivery on outside country thru local agent / forwarder.
Assist on the arrangement on external providers for building construction and modification.
Quality (QA/QC) / Process Engineer
Hoya Glass Disk Philippines Inc.
29th of October 2012 to 30th of April 2014
Lot 1-A, Phase 1-B First Philippine Industrial Park, Tanauan City, Batangas, Philippines
DUTIES & RESPONSIBILITIES
Conduct actual checking and analysis of root cause of problem (internal / external), formulation of countermeasure and immediate implementation.
Establishes, review, revise and control of quality standard operating procedures and work instruction related on how to maintain quality of machine and product and good
Production process.
Handle subordinates in maintaining product and machine quality through monitoring standard accuracy trends of product and machine efficiency and perform repair, calibration, maintenance and improvement actions as necessary.
Preparation of updated production plan layout and conduct proper equipment set-up and allocation for improving operator’s cycle time.
Provide machine parts list for cost estimation and usage for maintaining equipment efficiency. Perform monthly inventory for cost monitoring.
Conduct weekly and monthly Audit for quality standards compliance.
Preparation of investigation reports for internal / external claims and conduct meeting for discussion with the concern sections and departments.
Provide summary report of accomplishments every month. Production Quality Engineer (QA/QC)
Fujitsu Ten Corporation of the Philippines
15th of June 2010 to 30th of June 2012
100 Science Avenue, Technopark, Don Jose, Sta. Rosa, Laguna, Philippines
DUTIES & RESPONSIBILITIES
Performs significant engineering or technical work according to well-established procedures in assigned section / department.
Recommends quality and productivity improvements in area of responsibility.
Provide quality procedures as immediate action for compliance in Production.
Page 4 of 4
Conduct product repairing and testing, followed by investigation analysis of cause and corresponding corrective and preventive countermeasures.
Make analysis and action reports for problem solved and standard implementation for all affected production areas.
Subject Matter Expert (SME) – able to discuss and teach module related to Production process.
Participates in the implementation of company efficiency and productivity programs such as Quality Control Circle (QCC), Kaizen Kufuu Teiann (KKT) and other cost-cutting activities. ON-THE-JOB TRAINING
Quality and Environmental Management System
Staff Assistant / Junior Safety Engineer
Panasonic Communications Corporation of the Philippines April to May 2008
3Lot C3-8 Carmelray Industrial Park II, Calamba City, Laguna, Philippines
EDUCATION
Tertiary Bachelor of Science in Electronics Engineering June 2004 to April 2009
Lyceum of the Philippines – Laguna
Makiling, Calamba City, Laguna, Philippines
Secondary Malvar National High School
June 2000 to April 2004
Poblacion, Malvar, Batangas, Philippines
TRAININGS ATTENDED
ISO 9001:2015, ISO 14001:2015 and ISO 45001:2018 Transition and Internal Auditor Program
Techno Rig Group FZCO, National Industries Park, Jebel Ali, Dubai, United Arab Emirates
03rd to 05th of June 2018
Training Awareness on API Spec Q1 9th Edition
NTS Middle East FZCO, Jebel Ali Free Zone,
Dubai, United Arab Emirates
14th of March 2016
Risk and Safety Management
NTS Saudi Co. Ltd., Khaldiya 31952
Al Khobar, Kingdom of Saudi Arabia
11th to 12th of March 2015
Work Management
Fujitsu Ten Corporation of the Philippines
29th of February 2012
I hereby certify that the above information is true and correct to the best of my knowledge and belief.
SEDRICK UMALI DE MESA
Applicant