Bahauddin Maaz Naveed

B.E MECHANICAL ENGINEER

Approved Engineer by Saudi Engineering Council, Certified Lead

Auditor for CQI IRCA ISO 9001:2015 Quality Management system

ASNT NDT Level II - ( RT, UT, MT, PT)

Cell: +966-*********, E-mail: adgp7l@r.postjobfree.com

Post Applied For: Civil/MEP Quality Control Engineer

Objectives:

To be an integral part of the company growth & business achievements, to enhance my skills and abilities and be a milestone in growing path of technology while working with a company that would best exploit my capabilities.

Experience:- 8 years

Skills and experience

A bachelor of engineering (mechanical) with more than 8 years of experience in Quality & Inspection department.

Thoroughly experienced in inspection of Incoming material & Outgoing finished product, Positive Material Identification (PMI), Chemical & Physical Testing & Preparation of test certificates.

Excellent communication skills, analytical and problem solving capabilities.

Proficient in implementing systems and procedures to reduce rejection levels and ensure conformance to pre-set quality standards.

Proficient in developing new products along with the Engineering and quality team to meet the customer’s requirement.

Handled full construction site and Monitor Daily Progress along with Qa/Qc and Safety Requirement

Currently working with

Work experience in Maaden Aluminium Company as a Client Ras al Khair Saudi Arabia

From October 2019 to September 2020

Position : Civil/MEP Qa/Qc Engineer

Project : BTU(Bauxite Truck Unloading Project), 2nd Alumina Truck Loading Alumina Port Loading Project, New Change House House Project.

Client : Representing Maaden

Duration : 01-OCt-2019 to September 2020.

LOCATION : Ras Al Khair Saudi Arabia.

Work experience in petroleum chemicals and mining company -(SBG)

From July 2014 to October 2019

Position : QA/QC Civil Engineer

Project : HEG Loading arm project and Replace Air dryer project.

Client : Sabic Yanpet

Duration : 20-AUG-2017 to 30-SEPT-2019.

LOCATION : YANBU.

Position : QA/QC Civil Engineer

Project : Umm Wu’al Project Infrastructure, Process and Off

Sites at Ras Al Khair Project (Package- 2)

Consultant : Fluor Arabia

Client : Ma’aden Phosphate

Contractor : Dragados Gulf Construction Co Ltd

Duration : 20-DEC-2016 to 15-JULY-2017.

Position : QA/QC Civil Engineer

Project : Umm Wu’al Project Infrastructure,Utilities and Off

Sites at Ras Al Khair Project (Package- 8)

Consultant : Fluor Arabia

Client : Ma’aden Phosphate

Contractor : D ragados Gulf Construction Co Ltd

Duration : 15-May-2015 to 19-DEC-2016.

•Preparing RFI (Request For Inspection) for all civil activities like Excavation, Backfilling, FDT (Field Density Test), Lean concrete, Reinforce concrete, Curing, Moisture test, Surface preparation, Concrete coating, DFT(Dry Film Thickness) .

• Surveillance inspection of all civil ongoing activities at project site.

• Coordinating with construction engineers and PMT (Project Management Team) & Project Inspection Department (PID) for inspection of each activity for client approval.

• Witnessing of the testing of compressive strength of concrete at the 3rd party laboratory.

• Witnessing of Field testing like Compaction test FDT (Field Density Test) and Dry film thickness (DFT).

• Coordinate with Consultant regarding the site activities as per standard.

• Inspection of concrete finishing and building finishing according to standard and specification.

• Inspection of all formwork and Reinforcement steel work as per standard.

• Liaise with the contractor’s field staff and Third party laboratory to ensure that all required testing has been performed as per standard.

• Deep ability to read and interpret building plans, specifications and building codes; make mathematical computations rapidly and accurately.

• Great ability to communicate clearly and concisely, both orally and in writing.

• Demonstrated ability to inspect various types of residential, commercial and industrial building.

• Inspection of roads and utility diversions, earthworks, waterproofing, concreting & asphalt work.

• Reporting the all related activities to QA/QC manger.

• Reviewing all quality related activities & preparing all quality related reports on site.

• Preparing Weekly report of project related to project Quality Management.

• Issuing the NCR (Non Conformance Report) for any nonconformance.

• Reviewing third laboratory inspection.

• Conducting material inspections for all CIVIL items delivered at the site.

• Documentation of all RFI’s (Request for Inspection) after signed by the consultant.

• witnessing and sentencing of all site inspections within their disciplines

• Coordinate all site inspections with the site subcontractors

• Ensure that all inspection reports are accurate and that all attached documents are current status

• Ensure all work is correctly prepared prior to any inspection being undertaken

• Review all inspection reports for compliance

• Assist the site QC manager in the organization, maintenance and control of the quality system

• Liaise with the site construction engineers and provide assistance when requested

• Prepare nonconformance reports to the QA manager and assist in developing corrective actions

• Assist the QC manager and construction manager in resolving any discrepancies and ambiguities

• Coordinate with the Client QC inspectors for the resolution of site problems

• Coordinate with the site subcontractors to ensure that communications exist and are maintained

• Assist the site subcontractors in the resolution of drawing interpretation

• Attend the weekly QC meetings

• Review work procedures and method statements for compliance with good work practices and the customers contract specializations

• The issuance of nonconformance reports in conjunction with the site QC manager

• The completion of QC site instructions and coordinate their closure The review of inspection test packages during the course of construction activities

• Compliance with the site's health and safety regulations

•Prepared (IR) and Responsible for incoming materials inspection with client representative.

•Before consultant inspection, conducting internal inspections for MEP works and reporting to concern project engineers for rectification of works.

•Checking Installation as per IFC Drwaings.

•Reporting NCRs to the managements and helping to improve the quality in accordance Standards

•Prepared Inspection Test Plan (ITP),Check List and Test Report etc.

•Follow up with Engineers Supervises and check completion work and timely raise inspections and coordinate with consultant for approval.

•Submit and Follow up Material Approval from consultant.

•Submit monthly report to manager related work rejection rate, material reaction, non-conformance report.

•Provided active support to quality management team for overall quality controls & also implemented QCP & standards.

•Preparation of Inspection and Test Plan, Construction Quality Procedure and Method of Statement

•Preparation and Submittal for RFI coordination with concern engineer.

•Review and Inspection of all Material as per specification and raise inspections for approval prior to Installation.

•Daily monitoring the Construction Activities and raise work inspections in timely manner.

•Coordinate with Client representatives regarding the implementation and quality of works.

•Preparation of all logs related to all MEP activities

•Provide sufficient feedback to QA/QC Manager on the day to day quality issues

•Ensures the implementation of quality procedures and safety programs.

•Prepares and implements Quality Control Inspection Plan.

•Inspect all incoming materials in conformance to the project requirement and specification.

•Coordinate and supervise Nominated Sub-contractors in implementing the work to attain the target schedule.

•Installation of conduits for Mechanical and auxiliary works.

•Prepares necessary documents, approved drawings prior to inspection with the client representative.

•Collates quality inspection documents.

•Reviews IFC Drawings for proper implementation on site.

•Supports the Field Operations Group on proper implementation of the work procedure and conduct orientation if needed to all incoming workers and staffs.

•Ensure safety and welfare of each and every one on the site.

•Report any work progress to my superior (QC Supervisor) regarding the inspection and to coordinate any findings with the field operations group.

•Attends Quality Control and Coordination Meetings

•Responsibilities During Working as a Third Party Inspection Company

•Job Description:-

•To implement and ensure quality management system in the project through system & standards.

•Responsible for incoming materials inspection with respect to specification, Data sheet, material approval and quality plan.

•Responsible for the over-all implementation of Quality Control related mechanical works accordance with project specifications and Engineering Standards.

•Taking preventive and predictive actions for the non-conformities observed in site.

•Handled and organizes project documentation and correspondences including Operations and Maintenance Manual preparation.

•Responsible for resolving quality related issues in site, as per the approved procedures.

•Witnessing and sentencing of all site inspections within their disciplines.

•Ensure that all inspection reports are accurate and that all attached documents are current status.

•Conduct internal audit on monthly basis for MEP departments, reporting NCRs to the managements and helping to improve the quality in accordance Standards.

•Ensure all logs are updated, Daily monitoring the Construction Activities.

•Coordinate with Client representatives regarding the implementation and quality of works and compliance with all scope and cost specifications.

•Ensured accurate and timely reporting standards are maintained throughout the project.

•Establish & communicates targets for projects with other team project members

•Participated in Client/Contractor meetings and resolved Client/engineering and management project issues.

•Cost controlling for the project through rework, improper installation.

•Assisting project engineers to submit RFI documents in timely manner and keep proper log.

Client:-sadaf (shutdown) and Saudi Aramco (shutdown)

Duties and Responsibilities

Review and Approval of QA/QC Documents.

Surveillance and witnessing of Daily Construction Activities as per ITP

Check all blinding completed of all stationary equipment as per drawing.

Carry out pre cleaning and post cleaning inspection as per client procedure.

Monitor the storage, backing with manufacturer approved procedure

Inspection of repair activities during shutdown.

Witnessing the hydro-testing as per client testing procedure of stationary equipment and as per API 653,510,and 570 standards.

Carrying out the Alignment and Leveling Inspection of flanges

Witnessing gasket fit up

Witnessing stud bolt tightening

Preparation Daily Reports and Inspection Checklists.

Coordination with NDT Team.

Coordination with client QA/QC

Coordination with client and raising NCR's & RFI's.

Attending weekly QA/QC Meeting

Participating in Final Walk Through

Making sure the production and quality rate is maintained

Making sure site safety law follow.

Check all de-blinding is done as per client procedure.

Hawa valves Pvt. Ltd august 2012 to may 2014.

Designation: Quality control engineer.

Name of organization: Hawa valves Pvt. Ltd.

Global name in valves having 90% Export & 10% Domestic market

Company Profile: Hawa Valves (I) Pvt. Ltd.is an ISO-9001, API 598, API 6D, API 600, API 6A, CE

MARKING Certified Company, The company Manufacturers & Exporters of Valves For Oil & Gas, Offshore,

Petroleum, Marine, Power, Water Supply & General Industry.

Attend Audit of ISO 9001:2008

API 598, API 6D, API600, API6A.

CE MARKING.

Q.P (QATAR PETROLEUM).

OHSAS 18000: 19001.

Handle KUPE GAS PROJECT ALL Q.A / Q.C. ACTIVITY.

SAUDI ARAMCO AUDIT ATTENDED.

PDO CLIENT AUDIT.

Product Range

Gate valve: Bolted Bonnet, Pressure Seal Bonnet, Through Conduct API 6A, API 6D

Globe Valve: Bolted Bonnet, Pressure Seal Bonnet

Check Valve: Single Plate, Dual Plate, Non Slam

MODULER DOUBLE BLOCK & BLEED VALVE

BALL VALVES: Metal Seated, Top Entry 1PC,, 2PC, 3PC Trunion Mounted, 1Pc,

2Pc, 3Pc Floating

Ball Valve Reduce Bore & Full Bore.

New Developed Is 3Way 3PC Metal Seated Ball Valve, Client: Grand Prix

Major Customer: Middle East Oil Field, OGPM- OMAN

Job Profile:

WORK AS A Q.A. / Q.C. & N.D.T. INSPECTOR

All Incoming Material Inspection. & Check Fasterns Hardness

(GASKET, SPRING, FASTENERS, RTJ RING, LIPSEAL, etc.)

Check gear box as per standard size & as per BOM & PO

Pattern inspection report ( check pattern and clear to go For foundry)

Prepared pattern inspection report.

Casting inspection report, check casting as per pattern drawing.

Casting Radiography done as per client requirement.

All component (Raw Material & Casting) 100% P.M.I. done.

Visually & Identification check reference to (MSS SP 55 & MSS SP 25)

Check Hardness of all receiving casting/round bar.

Check Radiography report & films as per requirement.

Follow up for R.T. report & Arrange for R.T.

Record of R.T. report & Storage of R.T. films.

Interpretation of R.T. films & checks report.

Check all M.T.C as per required standard.

In-Process Inspection(All Components dimension Check as Per Drawing,)

Check All Component R.A. value.

Going to vender inspection, check job as per drawing.

Inspection of spare parts.

Mating parts verification, Assembly register update.

Surface finish, Sr.no.allocation.

Check L.P.T of Client Requirement prepared Report.

Internal Check L.P.T. 100% on Pressure Containing Parts.

Calibrations of all inspection, measuring, Monitoring & test equipments.

Testing of Valves.(Hydro shell,Hydro seat, air seat check as per reqd. std

Check Nitrogen Testing of required valves, check helium testing of required valves.

For Export & Domestic Customer.

Forwarding raw materials to test labs for testing.(chemical & physical)

Control of non conforming products at various stages. (N.C.R.relased)

Follow up N.C.R. close & verification of rework & Corrective Action.

Control of quality records for ISO 9001 - 2008 documentation.

Attend third party inspection ( Velosy, D.N.V. BEUREU VERITAS, shell, client)

check painting as per procedure and NACE standard .

Final product inspection Visually, Dimensional Cross Check, Packaging, Tagging.

Implement schedules relating to planned inspection and repairs for designated area.

Ability to utilize contractor resources.

Coordinating with operation,planning and maintenance

Perform basic failure analysis and issue inspection reports

Give safety guidelines to workers regarding OHSAS 18000 and HSE policy.

Support maintenance and projects in inspection activities.

Tracks the progress of inspection activities

Completion of assignment as per planned objectives.

Give accurate and exact quality report on time

Good organizational skills like planning, organizing supervision mentorship and technical report writing.

EDUCATIONAL QUALIFCATION:

Degree

Institute

Board/ University

Year

%

B.E IN MECHANICAL ENGINEERING

SECAB INSTITUTE OF ENGINEERING AND TECHNOLOGY (BIJAPUR)

VISVESVARYA TECHNOLOGICAL UNIVERSITY.

(BELGAUM)

2012

63.33

DIPLOMA MECHANICAL ENGINEERING

ABDUL RAZZAK KALSEKAR POLYTECNIC(PANVEL)

MAHARASHTRA STATE BOARD OF TECNICAL EDUCATION. (M.S.B.T.E)

2009

57.63

SSC

Holy mary convent high school

Mumbai

2005

63.46

PROFESSIONAL QUALIFICATIO

Certified in Non Destructive Testing ASNT Level II - ( Radiographic Testing, Ultrasonic Testing, Magnetic Particle testing & Penetrant testing

Hands-on experience of working on all of the above testing.

COMPUTER PROFICIENCY:

MS Office – Word, Excel, PowerPoint

Internet

PERSONAL DETAILS:

Fathers name: Bahauddin Naveed Abdul rahman

Marital Status: single

Date of Birth: 15th March, 1990

Nationality: Indian.

Language proficiency: English, Hindi, Marathi.

Passport number: K6524604 (28/08/2012 to 27/08/2022)

HOBBIES: Playing Cricket, playing soccer, reading newspaper.

DECLARATIONS

I hereby declare that all the information furnished above are true and correct to the best of my knowledge and belief.

Thank you.

PLACE -JUBAIL

Contact this candidate