Domingo C. Coronel Senior Instrumentation and Controls Engineer

adgnif@r.postjobfree.com 224-***-**** 8410 Elm Lake Dr, Houston, TX 77083

Top performing Instrumentation and Control (I&C) engineer leader with exceptional successes on diverse projects domestically and internationally. Experience includes FEED, detail engineering, procurement, construction support, inspections, Pre-Commissioning, Commissioning and start-up for greenfield and brownfield projects in Oil and Gas, Petro-Chemical, Pipeline, Water & Wastewater. Have excellent communication skills, extensive training and relevant experience in the field of instrumentation engineering and design. Has proven leadership potential, self-motivated and can work under pressure. Would like to be affiliated with a company that welcomes innovations and continuous improvement.

Areas of I&C Expertise include:

Engineering and Design

Operation Maintenance

Cross-Discipline Collaboration

Construction, Startup, Commissioning

FAT and SAT

Project Management

Client and Vendor Relations

Staff Training & Leadership

Problem Resolution

Professional Experience

SWDS LLC Katy TX 09/2019 – 03/2020

524 Westgreen Blvd Ste b, Katy, TX 77450, Tel. 281-***-****

Sr. Instrumentation & Controls Engineer – Assign in Arion Blue LLC

Focused on the development of the Instrumentation and Control System engineering in Midstream Oil and Gas sector in Monroe CPF, Ramsey, Sioux Station, Ackerman Station, Blue Feather Station, Bozeman Station, Buckdraw, and Durango

●Participated in PFD's and P&ID’s development. Checked P&ID’s for correct instrumentation in conformance with client standards for changes management and project work

●Prepared Instrument Index, I/O List, and Instrument Data Sheets utilizing SPI (INtools). Sized orifice, valves, flowmeter & selected process industry fundamental measurements such as flow, pressure, differential pressure, vacuum, level, & temperature. Utilized SPI (INtools) for preparation of design, bid and construction packages

●Developed Control System Philosophy, Control Narrative & Cause and Effect documentations

Fircroft Inc. Houston TX 04/2019 – 09/2019

1155 Dairy Ashford Rd Suite 750, Houston, TX 77079, Tel. 713-***-****

Instrumentation Engineer – Assign as Instrument Engineer for GOLDEN PASS LNG Project

Focused on the development of the Control System engineering and procurement activities performed by the EPC Contractor and supported by the MICC during Detailed Design. The position stewards the detailed design, procurement and installation of the control systems and ensures that the Project's requirements, as detailed in the Technical Specifications, for all control systems engineering are carried out faithfully, and in a timely fashion. The role also stewards control/safety system engineering aspects of the Project with other discipline leads on the PMT, as necessary.

Key Accomplishments:

●Coordinated the review of all Contractor deliverables related to the Engineering and Procurement of the Control Systems

●Reviewed Contractor engineering and procurement deliverables associated with the Control Systems

●Ensured vendor packages meet the Project requirements for system integration and control functions

●Worked with the E&R Group to ensures compliance with all FERC permits/requirements & Ensures that the Control Systems are engineered and designed consistent with the Job Specification and Regulatory requirements

●Participated in I&C technical specification preparation, Cause & Effects, Hazard and Operability Reviews (HAZOP) and 3D modeling.

●Participated in packaged equipment related FAT's (e.g. Metering packages, etc.) as required

●Provided support to site construction and completions teams

●Provided support to operations during startup

●Managed instrumentation and controls related lessons learned for the project

●Reviewed Vendor packages such as Thermal Oxidizer, Gas Compressors, Air Compressors, Blowers, Air Dyers, Reverse Osmosis, Water Softener, Standby Diesel Generator, Heaters and Flares and analyzer shelters, ensuring full functioning and safety compliance with Instrumentation and Controls project specification

●Tracked project deliverables pro-activity in order to guide on time completion and secure overall schedule adherence

●Took charge of personally inspecting I&C engineering design, improving compliance with both safety and project specifications before implementation

●Applied detailed knowledge of ISA 5/5.4/20/84, ANSI, UL, CSA, NEMA, National Electric Code (NEC), IEC 60079, 61131, 61511, and API to solve complex problems

●Applied the environmental & safety requirements, industrial safety practices, quality assurance and quality control best engineering practices, and knowledge related to I&C construction

●Provided onsite engineering support to address technical questions in a timely manner

Jacobs Engineering Group Inc. Houston TX 07/2017 – 04/2019

5995 Rogerdale Rd Houston TX 77072, Tel. 832-***-****

Control System Engineer – Technical Specialist Analytical Systems/Process Automation

Supported Invista ADN Detailed Engineering Design and Canadian Kuwait Petrochemical Corporation I&C Front End Engineering Design projects.

Key Accomplishments:

●Technical resource for the control systems field specifically related to complex DCS, PLC, SIS, MMS, ASC and (major) Analytical Systems

●Supported P&ID, Instrument Index and I/O List development

●Supported development of material/labor TIC and engineering/design effort hour cost estimates

●Developed analytical systems scope of work documents and analyzers specifications and analyzers data sheets for GC, O2, Moisture, H2S, O2/Combustion, H2/Hydrocarbon, HCN, Trace O2, Conductivity, pH, TOC, CO, CO2,

based on Flame Ionization Detector, Flame Photometer, thermal conductivity detector, spectrometer, NDIR,

TDL., UV, Microfuel Cells, and Zirconia Oxides technologies and measurement methodologies.

●Developed specifications for I&C, Control Systems for Package Equipment, Machine Controls Monitoring System, Vibration Monitoring System, Anti Surge Controls, CEMS, System, Process Analyzer System, Custody and other Metering System, PLC, etc.

●Supported incorporation of Instrumentation and Controls systems content into mechanical equipment vendor packages (i.e. Gas Compressor, Air Blowers, etc.).

●Developed DCS and SIS scope of work documents.

●Developed and/or support development of analyzer data sheets, analyzer shelter/rack narrative specifications, analyzer system block diagrams, shelter/rack equipment layout drawings, sample conditioning system assembly drawings, sample supply/return layout drawings, probe assembly drawings, shelter/rack assembly drawings, transport time calculations, pressure drops, etc.

●Developed and/or support development of I/O List, Range/Alarm/Trip/Shutdown schedules, system block diagram cause and effect logic matrix, complex loop narratives, hardware/software/configuration specs, etc.

●Provided technical direction for selection of items to be specified, ensure compliance with client requirements and standards, check specification/requisition packages prepared by others

●Prepared engineering specification and requisition packages for inquiry and purchase

●Prepared technical evaluations and make recommendations for purchase

●Interfaced with suppliers to ensure compliance with specifications

●Reviewed vendor data to assure specifications and project requirements are met.

CAMERON LNG Houston TX / Hackberry, LA 08/2015 – 02/2017

2925 Briarpark Dr. Houston TX 77042 USA, Tel. 832-***-****

Senior Instrumentation Engineer

Led efforts to address technical needs for all facility I&C hardware activities, met and exceeded company objectives and responded to issues quickly and efficiently for DCS and PLC systems. Oversaw and audited hardware designs for I&C as well as contributed to PFD's, PID's, Cause and Effect, HAZOP and reviewed vendor I&C and Analyzer instrument data sheets and drawings in compliance with project requirements.

Key Accomplishments:

●Witnessed and contributed to FAT and inspections for I&C of multiple mechanical equipment packages such as Thermal Oxidizer, Gas Compressors, Air Compressors, Blowers, Air Dyers, Reverse Osmosis, Water Softener, Standby Diesel Generator, Heaters and Flares and analyzer shelters, ensuring full functioning and safety

●Tracked project deliverables pro-activity in order to guide on time completion and secure overall schedule adherence

●Took charge of personally inspecting I&C engineering design, improving compliance with both safety and project specifications before implementation

●Participated in the management of change (MOC)

●Key contributor to construction, commissioning, and late in project start-up activities through on site leadership and direction as well as hands on participation

●Applied detailed knowledge of ISA 5/5.4/20/84, ANSI, UL, CSA, NEMA, National Electric Code (NEC), IEC 60079, 61131, 61511, and API to solve complex problems

●Applied the environmental & safety requirements, industrial safety practices, quality assurance and quality control best engineering practices, and knowledge related to I&C construction

●Provide onsite engineering support to address technical questions in a timely manner

●Work closely with EPC contractor technical representatives to ensure that installations comply with Cameron LNG requirements and design intent

WINK ENGINEERING LLC St. Rose, LA 09/2013 –08/ 2015

120 Mallard Street St. Rose Louisiana 70087 USA, Tel. 504-***-****

Senior Instrumentation & Controls Engineer

Headed engineering for upgrades and revamps of diverse facilities, supported construction as necessary and administered engineers and designers, which included work assignment, coaching, and quality control. Consulted on automation and instrumentation technology for oil and gas refineries and petro-chemical plants as well as oversaw scheduling, prepared appropriate files, and developed cost estimates and execution plans.

Key Accomplishments:

Participated in PFD's and P&ID’s development. Checked P&ID’s for correct instrumentation in conformance with client standards for changes management and project work

Prepared Instrument Index, I/O List, and Instrument Data Sheets utilizing SPI (INtools). Sized orifice, valves, flowmeter & selected process industry fundamental measurements such as flow, pressure, differential pressure, vacuum, level, & temperature. Utilized SPI (INtools) for preparation of design, bid and construction packages

Developed specifications and implementation plan for major control systems equipment such as Distributed Control Systems (Delta V and Honeywell Experion), Programmable Logic Controllers (PLCs), Safety Instrumented Systems (SISs), Process Analyzer Systems, Toxic Gas and Combustible Gas Systems and Control Panels

Developed Control System Philosophy, Narrative documents & Cause and Effect documentations

Analyzed bids to support automated control valve, pressure safety and relief valves, and pressure, level, & temperature transmitters’ purchases

Collaborated across multiple disciplines to achieve challenging goals and deliver projects on time

Developed and implemented plans for control of complex equipment and systems throughout plant

Collaborated with clients as point of contact and employee responsible for identifying wants and needs them integrating them into project plans

Checked, revised and adjusted engineering documents, instrument plan & layout plans, control schematics wiring diagrams, instrument loop diagram & instrument installation details drawings

Reviewed vendor’s I&C and Analyzers drawings to ensure compliance to project requirements

Tracked construction schedule and progress to ensure overall project schedule compliance. Monitored and reported construction and commissioning test activities as per design and planning

Provided field construction support on the following oil and gas & petro-chemical facilities: Chevron Oronite in Belle Chase Louisiana, Marathon Refinery in Garyville Louisiana, Valero Refinery in St. Charles Louisiana, Norco Louisiana, Meraux Louisiana, Port Arthur Texas, McKee Texas & Sun Ray Texas, Motiva Enterprises LLC in Norco Louisiana & Convent Louisiana, Philips 66 Alliance Refinery in Belle Chase Louisiana, IMTT (International-Matex Tank Terminals) in St. Rose Louisiana, Exxon Mobil -in Chalmette Louisiana, Lion Oil Refinery in El Dorado Arkansas, Sinclair Oil in Sinclair Wyoming, Eagle Ford Pipeline, Castleton Commodities Inc. Condensate Splitter in Corpus Christi TX

JACOBS ENGINEERING GROUP INC. Louisville, KY 07/2013 – 09/2013

9400 Bunsen Pkwy Louisville KY 40220 USA, Tel. 502-****-****

Senior Controls Engineer

Served as a discipline lead represented control systems department for all Controls engineering and construction phases responsible for defining project scope and supporting construction.

Key Accomplishments:

Directed all aspects of field Controls installations with particular focus on efficiency and accuracy

Coordinated with I&C designers on design as well as provided coaching to controls engineering team as necessary to ensure highest levels of performance.

Developed conceptual studies & layouts, cost and planning studies, construction specifications & design calculations to produce documentation necessary to completely convey design, purchase, & install all control items

Identified routine and unique problems, developing engineering solutions that met expectations and secured on time delivery of client needs

Provided field construction support on the following petro-chemical facilities: Clariant Catalyst Plant in Louisville KY and Dupont Chemical Plants in Tennessee, Ohio, and West Virginia

CB&I/SHAW PROJECT SERVICES LLC Aiken, SC 04/2012 – 7/2013

Savannah Dr. Aiken SC 29804, USA, Tel. 803-***-****

Senior Instrumentation & Controls Engineer

Supported I&C in field engineering & construction for Mixed Oxide (MOX) fuel fabrication facility Savannah River Site in Aiken SC.

Key Accomplishments:

Performed continuous inspections and initiating documentation for all instrumentation system installations on an ongoing basis, especially relating to P&ID’s, piping isometrics, instrument index, wiring diagrams, schematic, hookup, and loop drawings, control valves, level switches, instruments and associated sensing lines, taps, root valves, racks, cabinets, cables, terminations, loop tests and calibration.

Reviewed cross-discipline documentation, working with clients and vendors as well as fellow engineers to ensure efforts were aligned with company/client needs

Coordinated and worked closely with the appropriate Responsible System Engineer, the assigned Integrated Safety Analysis personnel, the electrical design staff, and the other discipline engineers assigned to the same systems to complete the final I&C design documents with both the limits of the budget and schedule baseline

Influenced I&C group and provided knowledge and leadership to assist less experienced personnel and the design staff

Responsibilities included development of the detailed design on to the project drawings which includes P&ID development, instrument loop diagram, instrument installation details, instrument plan and layout drawings, PLC wiring diagrams, bill of materials, Instrument Data Sheet, Instrument List, Instrument I/O Lists, Logic Diagrams, Control Schematic Wiring Diagrams and Instrument and Controls procurement specifications

PARSONS Richmond, KY 12/2010 – 04/2012

830 Eastern Bypass, Suite 106 Richmond, Kentucky 40475, Tel 859-***-****

Senior Instrumentation & Controls Engineer

Supported I&C engineering & construction of BGCAPP (Chemical Agent Destruction Pilot Plant) in Richmond KY.

Key Accomplishments:

Participated and contributed in P&ID’s development. Checked P&ID’s for correct instrumentation and conformance to client standards for changes management and project work

Reviewed cross-discipline documentation, working with clients and vendors as well as fellow engineers to ensure efforts were aligned with company/client needs

Reviewed and prepared I&C drawings, design calculations and provided design recommendations which adhere to applicable codes, standards, and procedures

Prepared Instrument Index, Instrument Data Sheets, I/O Lists & Logic Diagrams

Provided input and technical guidance to I & C Designers as well as other engineers and vendors working on the same deliverables to promote technical excellence

Checked, created or revised instrument loop, field junction box, marshaling and process instrument drawings.

Reviewed vendor drawings to ensure compliance to project requirements

Performed analyzer design and provided analyzer specification for the purchase of new complete Analyzer System such as THC, CO, CO2, Air Monitoring, O2, pH, and conductivity

Provided engineering design and specifications to support procurement and construction activities for projects

Participated in Cause and Effect and HAZOP study and analysis

BAXTER & WOODMAN INC. CONSULTING ENGINEERS – 06/1990 – 10/2009

8678 Ridgefield Rd Crystal Lake, Illinois 60012, USA, Tel. 815-***-****

Sr. Instrumentation & Controls Engineer 04/1999 – 10/2009

Led I&C design in Water & Waste Water Treatment Plant Facilities in various cities in states of Illinois, Indiana and Wisconsin

Key Accomplishments:

Developed and provided front-end engineering design (FEED) of Instrumentation & Controls (I&C) which includes preparation engineering specification, system control narratives, instrumentation calculation, P&ID’s, process control & motor control circuit schematic diagrams, instrument loop diagrams (ILD’s), logic diagrams, instrument index, and cable schedules.

Planned and designed Supervisory Control and Data Acquisition (SCADA) Systems and Remote Terminal Units (RTU), Distributed Control Systems (DCS), and Security System (CCTV, Access Control, and Intrusion).

Designed Radio and Wireless Network SCADA System.

Designed Fiber Optic Network SCADA System.

Performed hardware and software integration, project cost estimations, programming, and hardware selections which includes computers, programmable logic controllers (PLC), Human Machine Interface (HMI), Variable frequency drives (VFD), radio transceivers, fiber optics, and field bus Instrumentation, and Analyzers.

Selection and sizing of instruments, Motor Control Centers which includes VFD’s and motor starters.

Participated in and provides input to the bidding process.

Instrumentation & Controls Designer 09/1990 – 09/1997

Designed I & C system package which includes system control descriptions, engineering specifications,

P&ID’s, control circuit schematic diagrams, instrument loop diagrams (ILD’s), logic diagrams, instrument index, and cable schedules.

US FILTERS/GAS TECHNOLOGY – 9/1997 – 3/1999

846 E Algonquin Rd a100 Schaumburg, Illinois 60173, USA, Tel. 847-***-****

Sr. Instrumentation Engineer

Assigned as Field Commissioning and Start-UP Instrumentation and Controls Engineer in the Geothermal

Plants (Malitbog, Tongonan & Upper Mahiao) H2S Abatements in Leyte Philippines.

Design Phase Engineering Experience

Prepared instrumentation and controls Engineering, Procurement, & Construction (EPC) of H2S Removal and Sulfur Recovery Plant.

Performed conceptual front-end engineering design (FEED)., such as developing control narrative & P&ID, preparing detailed instrument specification, engineering scope of work, man-hour/cost estimates, performing instrument selection, and valve and flow meter sizing, programming PLC, configuring HMI.

Designed controls, and emergency and shutdown systems, and logic diagrams.

Performed PLC and HMI programming to control and monitor H2S Abatement.

Performed Factory Acceptance Test (FAT) with the presence of Client Representative.

Construction Phase Engineering Experience

Managed construction activities of instrument & control components & equipment to ensure compliance with engineering drawings, specifications, environmental guidelines, quality assurance programs and construction safety program.

Conducted daily construction walk-downs throughout the day and attended safety and construction site walkthrough

Provided daily/weekly/monthly construction progress/status report

Checked and verified compliance of instrumentation-related construction drawings.

Prepared Instrumentation requisitions and procurement.

Monitored and reported receipt of materials on site

Supervised I & C installation which involves extensive inspection and verification of installed DCS, SCADA, RTU, Instrumentation, and Analyzers against P&ID’s.

Coordinated with I & C Design Engineer as required to resolve issues and work closely with other project discipline members

Verified materials, equipment, and workmanship, to ensure all installation meets all contract, design and code requirements.

Performed inspections and documentation of all instrument work in progress on a continuing basis to ensure quality and conformance to project specifications, codes, and contract (customer) requirements are met.

Performed Site Acceptance Test (SAT) with the presence of Client Representative. Ensured hardware and software platforms are operating without fault at high reliability levels.

Generated punch list to list all discrepancies such as missing instrumentation, control valves installed in wrong direction, reverse flow element impulse lines, incorrect ranges calibrated into local field instrumentation, etc.

Performed commissioning of I & C system for start-up by calibrating and simulating instruments, impulse

line test, temperature elements polarity check, visual check of level gauges, stroke control valves, functional loop check to verify the integrity of the wiring connections from the field transmitters to the main instrumentation and back to final control element, and interlocks/alarm checks.

SAUDI ARABIAN AMERICAN OIL COMPANY (SAUDI ARAMCO), SHEDGUM GAS (LNG) PLANT

Dhahran Saudi Arabia – (07/ 1979 – 05/1990)

Electrical, Instrumentation & Controls (EIC) Maintenance Planner: 1986-1990

Planned, scheduled and directed Instrumentation and Controls plant maintenance routine (PMR), repair works and troubleshooting, and turnaround routine (TAR). Supported IEC supervisors to carry out IEC maintenance schedule. Estimated job scope, number of men by craft, total man-hours required for each job, and established material requirement. Prepared maintenance schedule through computerized maintenance management system (CMMS) which encompasses all elements of maintenance functions such as work order system, planning and scheduling, material storehouse, material requisition, work execution and time recording, equipment records and history, and maintenance cost reporting.

Developed work execution plans for IEC maintenance jobs across the Refinery.

Coordinated with other Area Maintenance Planners on manpower needs to execute planned IEC jobs.

Support operations and maintenance on an as needed basis. Implement new techniques and technologies, such as equipment reliability, predictive maintenance, etc. to continuously improve department operations

Evaluated planned costs versus actual costs and looking for ways to improve equipment-specific work plans from accurate and efficient work execution strategies that promote safety and environmental excellence.

Occasionally back-filled for IEC maintenance supervisors.

Constructively resolved priority, scope, and job step and resource requirements in collaboration with operations.

Critiqued and adjusted plans and task lists for completed jobs based on information from craftsmen and supervisors.

Complied with all policies and procedures per Plant regulations and International Standard Code.

Observed safe work practices including wearing personal protective equipment.

Incorporated maintenance, safety and environmental procedures into all work plans.

Provided daily support to assigned I&C team, insuring hardware & software platforms are operating without fault at high reliability levels.

Supported operations during troubleshooting, upset or emergencies, improving instruments and controls in the area.

Supported projects, prepares and executes Instrumentation work.

Supported instrumentation engineering groups in Instrumentation and Analyzers installation, commissioning and start up in adding gas processing capacity to the existing gas complex and Claus Sulfur Recovery with sulfur degassing unit. Added slug catcher, feed gas heat exchanger to increase the capacity existing Dyglycol Amine (DGA) and Triethylene Glycol (TEG) with fuel gas stripping to dry the sweet gas. Also revamp the compressor, added cooling tower and electrical substation.

Lead Analyzer Tech: 1982 - 1986

Commissioned and performed plant maintenance of LEL and H2S monitors, analytical instruments (such as density meter, pH meter, conductivity meter, turbidity meter, spectrometry), O2 analyzer, laboratory and on stream computerized gas chromatographs analyzers (such as Flame Ionization Detector, Flame Photometry, thermal conductivity detector, spectrometry), Tail Gas H2S/SO2 Air Demand Analyzer (Claus Process), CO2 Analyzer, Continuous Emission Monitoring System(CEMS).

Lead Instrumentation Tech: 1979 - 1982

Performed plant maintenance and troubleshooting of process instrumentation (such as flow, level, pressure, and temperature), single and multi-loop controllers, recorders, vibration monitors, multipoint temperature indicators, emergency shutdown (ESD), boiler controls system and DCS (Honeywell TDC 3000). Performed digital, instrumentation, and analyzers commissioning and participated in plant start-up which includes compressors, turbines, boilers, etc. Supported Commissioning Group and lead instrument technicians during commissioning in calibrating and simulating instruments, impulse line test, and temperature elements polarity check, visual check of level gauges, stroke control valves, and functional loop check to verify the integrity of the wiring connections from the field transmitters to the main instrumentation and back to final control element.

Filipinas Synthetic Fiber Corporation

Manila Philippines ((1974- 1979)

Electrical and Instrumentation Maintenance Supervisor: 1977-1979

Supervised 26 technical staffs composed of unionized electricians and instrument technicians.

Developed and implemented working permit procedure to ensure compliance with safety practices.

Managed and provided technical direction for electrical and instrumentation routine maintenance, preventive maintenance, trouble shooting, tuning, and calibration program for instrumentation and control system to ensure that the process control systems function properly.

Planned, scheduled and directed Electrical and Instrumentation plant maintenance routine (PMR) repair works and troubleshooting, and turnaround routine (TAR). Supported E&I supervisors to carry out E&I maintenance schedule. Estimated job scope, number of men by craft, total man-hours required for each job, and established material requirement. Prepared maintenance schedule through computerized maintenance management system (CMMS).

Developed work execution plans for electrical and instrument maintenance jobs across the Refinery.

Evaluated planned costs versus actual costs and identified ways to improve equipment-specific work plans from accurate and efficient work execution strategies that promote safety and environmental excellence.

Constructively resolved priority, scope, and job step and resource requirements in collaboration with Operations.

Incorporated maintenance, safety and environmental procedures into all work plans.

Implement job safety analysis (JSA) procedure which helps integrate accepted safety and health principles and practices into a particular task or job operation.

Performed visual periodic inspections of the control panels, and motor control centers to determine the status of the instruments, and electrical devices.

Provided reports to management regarding problems associated with plant and system controls.

Conducted investigation to determine the causes of trips and similar events and developed measures to avoid recurrence.

Trained technicians to ensure they reached the desired skill level and keep them abreast of the new technology.

I&C Installation & Commissioning Engineer: 1974-1977

Planned and supervised the work of instrumentation engineering and construction contractors. Performed I and C commissioning which involves extensive inspection and verification of installed I and C systems equipment against PIDs. Coordinate with I and C Design Engineer as required to resolve issues. Performed inspections and documentation of all instrument work in progress on a continuing basis to ensure quality and conformance to project specifications, codes, and contract requirements are met.

Additional past positions include:

Instrumentation Design Specialist for Mangan Inc. (11/2008 - 1/2009) – BP Plant (formerly Arco) in Carson CA

Performed field walk-downs at client sites, attendance at client meetings, participation in project scoping and estimating, the development and review/approval of Instrumentation and Control packages for heavy industrial, oil refining, petro-chemical, pipeline or similar facilities, attending project team meetings and status meetings, participation in FAT / SAT, project loop checks and startups.

EIC Engineering Assistant, Instrument man - (1974-1977) Filipinas Synthetic Fiber Corporation (FILSYN)

Worked closely with maintenance and operations to identify issues related to the electrical, instrument, and control system and take corrective actions. Provided maintenance technical support to a manufacturing plant, when needed. Developed and maintain the preventative maintenance program for electrical equipment, instruments, and control system.

Contact this candidate