Engineer Manager
Resume:
Abrar Hussain.
Mob: +966-**-*******,
Email: ***********@*****.***
Career Objective
I am looking for a challenging position in a high-quality engineering environment where my resourceful experience and academic skills will add value to organizational operations. To be placed in a company in which I can use my technical skills and leadership qualities to the upliftment of the company and personal growth.
Work Experience Summary: (Total experience 11 year)
Currently (5 Years) working with YUNITCO as an E&I Engineer.
Position: Instrumentation Engineer (Maintenance, Project)
Duration: Oct. 2015 to till date. (05 Years)
1 years’ work experience as a Deputy Manager E&I in Project Department with Madinah Group of Companies Faisalabad, Pakistan
Position: Deputy Manager Instrumentation.
Duration Dec 2014 to Oct. 2015
1.5 years’ work experience as a Deputy Manager E&I in Project Department with Colony Group of Industries Phalia, Pakistan
Position: Deputy Manager Instrumentation.
Duration May 2013 to Dec. 2014
3 years’ experience in Matol Ethyl Alcohol Plant Matiari, Pakistan in Maintenance Department.
Position: Instrument Engineer (Maintenance)
Duration Aug. 2010 to May. 2013.
1 years’ experience in RYK group of companies Rahim Yar Khan, Pakistan in Maintenance Department.
1. Position: Apprentice Engineer (Maintenance)
Duration Sept. 2009 to August 2010.
Summary of Skills:
About 11 years of experience as an Electrical and Instrumentation systems engineer in detailed maintenance, commissioning and development co-ordination of Electrical and instruments control systems in Petrochemical, CO2 and Lubrication Plant projects.
Configuring and faults diagnosis of DCS, PLC, SCADA, RTU, Profibus Communication, Analyzers and Control Loops.
o DCS: Centum CS-3000/R3 Yokogawa, Experion C-200 and Control-Logic 5574 Allen Bradley.
o PLC: ABB, Allen Bradley and Siemens simatic S7 200,300&400.
o SCADA: WINCC/Siemens
VFD (Programming, Installation & Parameter Adjustment)
Troubleshooting, repair and maintenance of AC single phase & three phase circuit,MCCs and UPS systems.
Installation, calibration and loop checking of the field instruments (Krohne, ABB, Endress & Hauser, Honeywell, Yokogawa, Kobold )
Maintenance and calibration of the control valves (Pneumatic, Part turn, MOV, NRV ...) of Samson, Flowserv, Bray, Airtorque, Copes-Vulcan, Valtek, Masoneilan, Auma matic.
Experienced in flowmeters configuring (electromagnetic, orifice plate, ultrasonic, turbine, variable area) of Kobold, Rosemount, Krohne, Honeywell
Designing, Implementing and Commissioning of new control loops as per site requirements.
Review of control philosophy, P&I diagrams, cause & effect diagrams, instruments list, flow chart
Preparing master data sheet for PM schedule; ensuring safe and efficient performing of CM
Technical Support for the Electrical and Instrumentation team.
Experienced in the field instruments and control systems procurement activities.
Spares balance investigation and inventory control for all Electrical and instruments’ spare parts.
Maintenance, programming and calibration of Air Compressors (Comp. Air, Atlas Copco, Mark and Ingersoll Rand Air Compressors)
All the Instrumentation works related with 22 Ton, PLC based, Gas fired boiler.
Excellent communication interpersonal skills.
Organizational Experience
Organization: YUNITCO, Yanbu – Saudi Arabia
Duration: Oct. 2015 till now
Designation: Electrical and Instrument Engineer.
Project Description: Used Lube Oil Refinery.
Responsibilities:
Leading the team of Maintenance (Instrument, Electrical and Mechanical)
Reporting periodically to Plant Manager; preparing KPI, PM and CM reports.
Troubleshooting the totally integrated automation TIA from Siemens (DCS PCS7 v6.0 + PLC simatic S7 400 +SCADA WINCC) software and hardware.
Planning required upgradation for instruments to achieve production quality and cost minimizing.
Maintenance and calibration of pneumatic control valves (Weir, Flowserv, Blackborough ) and part turn actuated valves ( Bray, Airtorque, Flowtek )
Maintenance and calibration of different analyzers: Conductivity, Viscosity meter, GC Machine, PH, Turbidity and TDS (Endress and Hauser) and IMA/FL200 Oil in water.
Maintenance and calibration of flowmeters (electromagnetic, orifice plate, variable area, turbine, ultrasonic ) of ABB, Krohne, Rosemount, +GF+, Polysonics.
Maintenance and calibration of transmitters PT, LT, TT, DPT (Emerson Rosemount, Endress & Hauser, ABB ) and Monitran vibration transducers.
Calibrating and adjusting the dosing pumps (Prominent)
Ensure Spares balance and inventory control for all instruments’ spare parts
Organization: Madinah Group of Companies, Faisalabad – Pakistan
Duration: Dec. 2014 to Oct. 2015
Designation: Deputy Manager Electrical & Instrument.
Project Description: Fuel Ethanol Plant 125 T/Day. Maguin Interis France Technology and
Bio-Gas Plant by MS Proserpol - France; Automated by Avanceon with PLC- Control-Logic 5574 (Allen Bradley) system.
Kisan and Data Ghee Plants.
Responsibilities:
Involved in planning, estimation and selection of all the field instruments of Fuel Ethanol and Bio gas plants.
Lead the team for plants erection and commissioning woks.
Troubleshooting of PLC system (Control-Logic 5574) and faults diagnosis.
Programming of plant microcontroller.
Calibrating of weighting systems including load cell 50 ton capacity.
Planning and implementing additional control loops as per site requirements
Maintenance & calibration of Compressor and Dryer temperature control system.
VFDs selection and installation works.
Lead the team of two technicians regarding the maintenance work of ghee mills and Hydrogen Plant.
Organization: Colony Group of Industries, Phalia - Pakistan
Duration: May. 2013 to Dec. 2014
Designation: Deputy Manager Electrical & Instrument.
Project Description: Fuel Ethanol Plant 125 T/Day. Maguin Interis France Technology; Automated by
Avanceon with Experion C-200 (Honeywell) system.
Food Grad CO2 Plant by MS Proserpol - France; Automated by Avanceon with Simatic S7-300 (Siemens) system.
Three Steam Turbines 5MW each for supplying power to plants.
Responsibilities:
Leading a team of one Engineer, two Foreman and five instrument technicians.
Making annual budget of instrument department.
Programming HC-900 (Honeywell) by Ladder Diagram, and hardware troubleshooting.
Troubleshooting and hardware replacement of Simatic S7-300 (Siemens)
Basic troubleshooting of DCS Experion C-200 Honeywell.
Troubleshooting and hardware replacement of Simatic S7-400 (Siemens)
Maintenance & calibration of turbine governer control system.
Maintenance & calibration of transmitters PT, LT, TT, DPT (Rosemount, Yokogawa, Vega, Foxboro, Honeywell, Krohne )
Maintenance and calibration of pneumatic control valves (Blackborough, Copes-Vulcan, Valtek, Masoneilan).
Maintenance and calibration of orifice plate flowmeters ( Rosemount ) & gas turbine flowmeters
Configuring of stack sampler set, and O2 analyzer
Trainer at the company training center
Organization: Matol Pvt Ltd, Matiari - Pakistan
Duration: Aug. 2010 to May. 2013
Designation: Instrument Engineer.
Project Description: Fuel Ethanol Plant 100 T/Day. Maguin Interis France Technology; Automated by
Al-Makkah Engineering with Centum CS-3000/R3 Yokogawa.
22 Tons/Hr Packaged type Gas fired boiler – China; Automated by Chinese company with Simatic S7-200 (Siemens) system.
2MW Steam Turbine for supplying power to plant.
Responsibilities:
Leading a team of three instrument technicians
Troubleshooting PLC Simatic S7-200 (Siemens) and hardware replacements.
Programming, troubleshooting of DCS Centum CS-3000/R3 Yokogawa.
Add new control loop of cooling tower on DCS as per the requirement of plant.
Maintenance & calibration of transmitters PT, LT, TT, DPT (Rosemount, Yokogawa, Foxboro, Honeywell )
Maintenance and calibration of pneumatic control valves ( Valtek, Masoneilan) and motorized valves ( Auma matic & Auto tork )
Maintenance and calibration of orifice plate flow meters (Rosemount & Honeywell) & gas turbine flow meters.
Configuring of stack sampler set, and O2 analyzer
Organization: RYK Sugar Mills Limited, Jan Pur - Pakistan
Duration: Sept. 2009 to Aug. 2010.
Designation: Apprentice Engineer.
Project Description: 16000Tons Sugar Plant – HMC technology - Pakistan.
30MW Power plant- Shinko – Japan
Responsibilities:
Programming HC-900 by Ladder Diagram, and hardware troubleshooting.
Maintenance and calibration of Pressure gauges.
Maintenance & calibration of transmitters PT, LT, TT, DPT (Rosemount, Yokogawa, Vega, Foxboro, Honeywell )
Maintenance and calibration of pneumatic control valves (Blackborough, Copes-Vulcan, Valtek, Masoneilan).
Maintenance and calibration of orifice plate flow meters ( Rosemount ) & gas turbine flow meters
Educational Qualifications:
Full time regular B.E Electronics (Bachelor of Electronics Engineering) From Mehran University of Engineering & Technology Pakistan
Training
PLC and HMI (S7-200-300-400) from PAF KIET Karachi (Sept. 2012)
DCS Centum CS3000\R3 YOKOGAWA, trainee (Aug. 2011)
IT Skills
Operating systems : Windows XP, 7,NT, 2008 Server
Programs : Office Tools, AutoCAD
Internet : Very good
Programming languages : Visual Basic, C++
PLC Programming : Ladder Diagram
Control Programs : CS-3000/R3 DCS and WINCC
PC Networking : Very good
PC HW maintenance : Experienced
Languages
English: Fluent; read, write and speak
Arabic: Read and Speak.
Urdu: Mother tongue
Availability
Earliest start date: Given 4 weeks’ notice.
Declaration
I hereby declare that all information stated above are true to the best of my knowledge.
(Last Updated on June 2020)
Contact this candidate