MECHANICAL ENGINEER

Mohammed Mansoor Pasha Page * of 5

Name: MOHAMMED MANSOOR PASHA Nationality: INDIA

adgi22@r.postjobfree.com

MB: +966*********

EDUCATION

Educational Attainment: Bachelor of Engineering in (Mechanical) Name of University: Bangalore University, INDIA

Year of Graduation : August, 2002

EXPERIENCE STATEMENT

Sixteen Years Of Mechanical Engineering Experience In The Field Of Detailed Design, Front End Engineering

& Design (FEED). As A Plumbing Engineering & Material Expeditor (SAP). In The Implementation Of The Design, Coordination And Supervision Of Mechanical Services Which Includes, Plumbing Drainage, Hot And Cold Water Piping System. Prepares Detailed Engineering Drawings Prepares Bill Of Materials, Equipment Submittals & Specifications. Co-Ordinate With Projects Procurement Department (PPD) To Expedite Purchase Requisitons (PR’S) Release And Purchase Orders PO’S Placement And To Make Recommendations For Appropriate Transportation Mode. Modeling And Assembling By Using CAD Software. WORK HISTORY

Years of experience: 17

Years of work in KSA: 14 Years.

Years of experience in Saudi Aramco work: 14 Years. Current to Previous:

1. Employer Name: SNC-Lavalin Fayez Engineering

From: July 01, 2012 To: Aug 02, 2020 Location: Al-Khobar, Saudi Arabia Responsibilities: Mechanical Engineer

• Review ITB (Invitation To Bid) Documents And Technical Correspondence Received In The Proposals Stages, Issue Inquiry Requisitions, Prepare Equipment Data Sheets, Material And Man-Hours Estimates. Verify The Initial Bill Of Materials Prepared Check Technical Layouts And Drawings For Proposal Estimations.

• Identify Scope Of Work Budgeted Man Hour’s Budgeted Quantities, Total Number Of Deliverables, And Format For Deliverables Time Schedules And Other Specifications For Executions Of The Work. Monitor.

• Man-Hours Costs And Schedules. Recommend Cost Effective Measure To Reduce The Overall Packages Costs.

• Apportion Work Among Engineering Staff According To Specialized Training, Supervise And Monitor The Development Of Design, Requisitions, Specifications And Mechanical Data Sheets.

• Provide Inputs For The Preparation Of Plot Plan; Organize The Issuance Of Engineering Drawings And Technical Documents For The Inter-Discipline Checks (IDC’s) Coordinates With Other Engineering Discipline In The Integration Of Data Inputs.

• Supervise The Preparation Inquiry Requisitions; Participate In The Technical Evaluation Of Vendor Bid Offers. Direct And Provide Guidance In The Technical Bid Evaluation (TBE). Supervise The Review Of Design Calculations, Vendor Drawings And Documents, Ensure Vendor Documents Meet With Client

MECHANICAL ENGINEER

Business Use

Saudi Aramco: Company General Use

Specifications And Are Within Budgeted Costs.

• Coordinate The Preparation Of Purchase Requisition For The Procurements Of Equipments And Materials. Ensure Timely Return Of Vendor Documents Within Scheduled Timeframes.

• Participates Internal Staff Meetings, Ensure The Progress Of Project In Accordance To Schedule, Allotted Man Hours And Budgeted Costs Coordinates With Projects.

• Interact With Quality Assurance For Quality Issue; Strictly Ensure Compliance With Company’s ISO

• Quality Procedures. Coordinate Internal And Client Audit Requests; Facilitate Audit Procedures Of Engineering Systems Within The Department.

• Design And Layout Engineering Drawings Within Plumbing Specialty.

• Complete Plumbing Calculations Including Water Supply, Storm, And Equipment Sizes.

• Design Plumbing Systems Including Sanitary Waste, Vent, And Water Distribution Systems.

• Designs, Selects, Schedules, Sizes And Specifies Basic Plumbing System Components To Include Plumbing Fixtures, Drains, And Equipment.

• Prepare/Review Construction Specifications As Per Project Requirements

• Assigns The Final Drafting To CAD Technicians.

• Understands And Applies State And Model Codes As Related To Buildings And Plumbing Design.

(UPC - Uniform Plumbing Code). (ASTM -American Society For Testing And Material) (ANSI- American National Standard Institute) (NFPA- 99 National Fire Protection Asociation).

• Works To Meet Design Schedules.

• Produce Plans, Details, And Isometric Drawings.

• Preparation Of Technical Specifications And Scope Of Work (SOW).

• Communicates And Interface With Other Engineering Disciplines.

• Responds To Site Technical Queries.

• Act As Day To Day Supervisor To CAD Technicians By Assigning Work, Answering Questions And Checking Work For Accuracy.

• Preparation Of Medical Gas Piping, Calculation And Equipment Sizes.

• Coordinate With Projects Procurement Department (PPD) To Expedite Purchase Requisitons (PR’S) Release And Purchase Orders PO’S Placement And To Make Recommendations For Appropriate Transportation Mode.)

• Co-Ordinate With All Saudi Aramco Service Company To Expedite Shipment Of Materials To Kingdom Of Saudi Arabia.

Project Description & Experience in this Position:

• SAUDI ARAMCO PROJECT: BI-10-00614; Shaybah Axl Crude Increment Support Facilities Project.

• SAUDI ARAMCO PROJECT: EWO-12C018; Care Works Renovation, Dhahran (Primary Care Building # 50)

• SAUDI ARAMCO PROJECT: BI-10-01055; Jazan Refinery Sapmt Residential Camp And Site Office.

• SAUDI ARAMCO PROJECT: EWO-12C191; Renovation of North and East Admin Building 176 & 175. Dhahran.

• SAUDI ARAMCO PROJECT: EWO-12C067; Install Canopy Extension at ERDD Bulk Plants.

• SAUDIARAMCO PROJECT: BI-10-001382; Expand Dhahran Residential Community, Dhahran.

• SAUDI ARAMCO PROJECT: EWO-14C145; Construction of New DTD Building, Dhahran.

• SAUDI ARAMCO PROJECT: EWO-14C063; Kkia-Air Fueling Operation, Tank Farm.

• SAUDI ARAMCO PROJECT: EWO-13S049; Installation of weight scale at sulphur loading facility at shedgum.

• SAUDI ARAMCO PROJECT: BI-10-01924;Residential Houses At Ras Tanura And Udhailiyah.

MECHANICAL ENGINEER

Mohammed Mansoor Pasha Page 3 of 5

• SAUDI ARAMCO PROJECT: EWO- 14C190; Install Generator For Back-Up Power Supply For Dhahran Tool House Drsd Building 3091.

• SAUDI ARAMCO PROJECT; EWO#14C096; Construct Admin Office, Minor Maintenance Facility & Musalla in T& ESD Mubarraz

• SAUDI ARAMCO PROJECT; EWO#14C108; Computer Hardware Racks with Water Cooling Technology, Dhahran.

• SAUDI ARAMCO PROJECT; EWO#14C145; Construction of New DTD Building, Dhahran.

• SAUDI ARAMCO PROJECT; EWO#15C039; Tower Computer Center in Raw Cooling, Dhahran.

• SAUDI ARAMCO PROJECT: BI-10-010**-****;Material Expediting Support For Maintain Potential Projects.

• YANBU EXPORT REFINERY; 601001 - Feed For Installation of Yasref Warehouse Facilities & Administration Building. YANBU

2. Employer Name: ZUHAIR FAYEZ PARTNERSHIP CONSULTANTS From: May 06, 2006 To: June 31, 2012 Location: Al-Khobar, Saudi Arabia Position Held & Duties: Mechanical Engineer

• Design and layout engineering drawings within Plumbing specialty.

• Complete Plumbing calculations including water supply, storm, and equipment sizes.

• Design Plumbing systems including sanitary waste, vent, and water distribution systems.

• Designs, selects, schedules, sizes and specifies basic Plumbing system components to include plumbing fixtures, drains, and equipment.

• Prepare/review construction specifications as per project requirements.

• Assigns the final drafting to CAD Technicians.

• Understands and applies state and model codes as related to buildings and Plumbing design.

• (UPC-Uniform Plumbing Code). (ASTM-American Society for Testing and Material) (ANSI-American National Standard Institute) (NFPA- 99 National Fire Protection Asociation).

• Works to meet design schedules and complete tasks.

• Produce plans, details, and isometric drawings.

• Preparation of technical specifications and Scope of Work (SOW)

• Communicates and interface with other engineering disciplines.

• Responds to site technical queries.

• Act as day to day supervisor to CAD Technicians by assigning work, answering questions and checking work for accuracy.

• Respond to Technical Queries (TQ) as raised from the client. Project Experience in this Position:

• DETAILED DESIGN & ENGINEERING WORKS For “Construction of 7 New Schools & Demolish Existing School In Thuwal Town” - For Al-Muhaidib Contracting Co.

• SAUDI ARAMCO PROJECT: BI-25-00012; Thuwal Town Development Project Proposal For Sewerage

MECHANICAL ENGINEER

Business Use

Saudi Aramco: Company General Use

Treatment Plant, Distribution Sys. & Irrigation Network.

• SAUDI ARAMCO PROJECT: EWO-10S017; New Maintenance Building At Hawip.

• SAUDI ARAMCO PROJECT: EWO 10S042 - Build New Swid Maintenance Shops Facilities At Uwip-4.

• SAUDI ARAMCO PROJECT: EWO-10C189;Reception Facilities Improvement At ERDD Bulk Plants

• SAUDI ARAMCO PROJECT: BI-25-00002 - As-Built Development for Kaust Town Center Facilities.

• SAUDI ARAMCO PROJECT: BI-25-000**-**** - Masjids, Residential and Town Center Areas At Kaust Campus, Rabigh.

• SAUDI ARAMCO PROJECT: EWO-10S105; Adding Clinic & Storages at HNGLP (D.E.)

• SAUDI ARAMCO PROJECT: Udh’lh (BI-10-00696)-J10-09700; Expand Emergency Medical Facilities DD.

• SAUDI ARAMCO PROJECT: BI-10-00696; Expand Emergency Medical Facilities, Udhailiyah (D.E.).

• SAUDI ARAMCO PROJECT:BI-10-00450; Manifa & Tanajib Expansion I.s.f (Construction Support).

• SAUDI ARAMCO PROJECT: BI-25-00026; KAUST Security Fence.

• Information Technology & Communication Complex (ITCC).

• JUBAIL EXPORT REFINERY PROJECT: Package 5C; Auxiliary utilities.

• JUBAIL EXPORT REFINERY PROJECT: Package 9C; Tank Farm & Loading Facility. 3. Employer Name: GAS TURBINE & RESEARCH ESTABLISHMENT. Bangalore, India

(Research and Development Organization, Ministry of Defense) From: September 02, 2002 To: February 06, 2006 Location: Bangalore, India Position Held & Duties: Junior Mechanical Engineer Project Experience in this Position:

Project Title: Sub-assembly of Compressor

• Design changes of Side cylinder head.

• Existing design was studied.

• The design changes were to provide mounting locations for the cooling fan.

• Used advanced surfacing module to complete the job.

Project Title: Sub-assembly of a Blower parts

• Design changes of Plastic parts of Blower system.

• Existing design with engineering modifications were given.

• The design changes were to provide ribs for strengthening, as the wall thickness was to be reduced without affecting the quality of the product.

• Used advanced surfacing module to complete the job. Parts Involved

• Blower housing.

• Rotor Blades and mating parts

• The models were to be parametric for all the mounting parts and involved complex drafts and fillets.

Project Title: Sub-assembly of a Casing.

MECHANICAL ENGINEER

Mohammed Mansoor Pasha Page 5 of 5

• Design changes of Plastic casings of audio system.

• Existing design was studied.

• The design changes were to provide ribs for strengthening, improving the effectiveness of the locking features as the wall thickness was to be reduced.

• Used advanced surfacing module to complete the job.

Project Title: Sub-Assembly Casing of a Compressor

• Assembly casing of compressor

• Compressor bleed

• Compressor cover

• Compressor elbow

• In order to improve the air structure inside the cylinder

Project Title: Sub-Assembly of Fan 2 and 3 stage Disc, Seal drum & Shaft Fan

• IT is a sub-assembly of five components

• Shaft 2 stage fan

• Shaft 3 stage fan

• Drum seal stage 1 and 2 fan

• Drum seal stage 2 and 2 fan

• 2 Stage fan - In order to improve the air structure inside the cylinder

Project Title: Sub-assembly of a turbine rotor.

• Transient thermal analysis is carried out for the rotor followed by thermal mechanical analysis for all the time plots.

• Radial and axial growth is found out.

• Temperature mapping from coarse model to the refined model is done.

• The Temperature mapping from 2D to 3D model is also done.

• Parametric macro is written to create the model, apply loads, solve & analyze the Problem.

GENERAL INFORMATION

Professional Affiliations:

1. Saudi Council of Engineering (SCE) Reg. No. 90679. 2. Attended - Safety Orientation Program [ Ras-Tanura Refinery & Bulk Plants] Software Skills:

AutoCAD 2005/2007,

MicroStation,

Microsoft Word,

Microsoft Excel

Contact this candidate