Piping Plant

ADD: - Flat No.C-*** *rd Floor Nanapir Complex Mapari

Mohalla Khend Chiplun -415605.

Email –************@*****.***

WhatsApp Contact No.+974********, +974********

HIGHLIGHTS

** ***** *********** *n AutoCAD Drafting.

7 years’ work in Oil &Gas projects As a piping draughtsman 3 years’ work in Pharmaceutical projects As a Senior piping draughtsman. CAREER OBJECTIVE:

Seeking a Permanent Professional Position & Good Working Environment. To be a part of professional organization, where I can use my skills to its maximum level. I want to pursue my career in the piping Industry where in I can apply my Implementation and Support Experience along with my strong analytical, creative and inter-personal skills in order to gain tangible and intangible benefits for the organization. WORK EXPERIENCE: -

1) Currently Working in ‘GASCO - DOHA QATAR as Piping and mechanical Designer for LPG System, Fuel System and Detailed Piping layout and Tank fabrication drawings” from December 2015 to till date.

GASCO is the largest Gas System (LPG / SNG / Lab Gas / Medical Gas

/ Fuel System / Gas Detection System/ Fuel tank fabrication) & Boiler Steam System installation and Service providing company in Doha – Qatar

2) Worked with ‘FABTECH TECHNOLOGIES INTERNATIONAL LTD. Andheri (w) working as a Senior piping draughtsman.

Duration: Oct 12 to Dec 15

3) Worked with ‘R-CAD Drafting& Consulting Engineer.’ as Piping draughtsman. Duration: April 10 to Oct 12

4) Worked with ‘Achme Laser Tech .’ as Mechanical Draughtsman from Aug 2009to April 2010 Work profile:

Preparation of plot plan.

Equipment Layout.

Preparing a Piping & Instrumentation Diagrams (P&ID’s) or Process Flow Diagrams (PFD’s) or Schematic Diagrams (SD’s) including all selected Items as per using standard tagging & symbols.

Preparing a General Arrangement (GA) drawing with safety distances for LPG Tank Area and Communicates and interfaces with other Project design and engineering disciplines, as well as Clients and Consultants.

Piping Area according to NFPA-54 & 58 and Local Authority requirements

(WOQOD QATAR).

Piping Layout.

Preparation of pipe Rack drawing with added support detail drawing. Zaheer.S.Shemle

Preparation of cooling tower piping layout as per given p&id.

Preparation of MTO for ordering purpose.

Preparation of Piping Isometric drawings.

AS BUILT Drawings of Completed Projects.

Layout Studies.

Bill of Material (BOM) or Bill of quantity (BOQ).

AHU piping layout as per given p&id.

AHU Ducting layout

Equipment fabrication layout (Heat Exchanger, Boiler)

Section view of machine.

Cylindrical and rectangular Fuel tank fabrication Drawings.

Preparation of Tank Farm drawing with Bund Calculation as per CODE STD.

Preparation of Tank and Distillation column Nozzle orientation drawing.

Preparation of single wall, double wall Aboveground rectangular fuel tank as per code (UL-142, BS 799-5, STI/SPFA F921)

Preparation of Aboveground single wall, double wall horizontal cylindrical fuel tank as per code

(UL-142, STI/SPFA Fireguard/ F941, BS 2594, BS EN 12285-2, /SPFA F921)

Preparation of Underground single wall, double wall horizontal cylindrical fuel Tank as per code (UL-58/1746, STI P3, BS-2594)

Major Responsibilities and Nature of Job: - (GASCO - DOHA QATAR)

Preparing a Piping & Instrumentation Diagrams (P&ID’s) or Process Flow Diagrams (PFD’s) or Schematic Diagrams (SD’s) including all selected Items as per using standard tagging & symbols.

Preparation of the Comment Compliance note & revision drawings for the comments received from Consultants/WOQOD on the Design Packages.

Preparing a General Arrangement (GA) drawing with safety distances for Tank Area and Piping Area according to NFPA-54 & 58 and Local Authority requirements (WOQOD).

Communicates and interfaces with other Project design and engineering disciplines, as well as Clients and Consultant.

Preparation of Red Mark-Up drawings for final measurement by site visit.

Preparation of As-built drawings based on Red Mark-Up drawings.

Bill of Material (BOM) or Bill of quantity (BOQ).

Preparation of Wiring Electrical and Instrumentation diagrams.

Preparation of GA and fabrication drawings for above ground and underground fuel storage tank as per Design calculation and standards.

More than 100 LPG Systems Design & Drafting for Villas, Restaurants, Shopping malls and Accommodations. Above ground tanks & underground tanks.

More than 100 Fuel systems Design & Drafting for Car park, Shopping malls and Hotels. Above ground tanks & underground tanks.

Preparation of piping isometric drawings.

Preparation of piping supports drawings and Pipe rack arrangement drawings.

Cylindrical and rectangular Fuel tank fabrication detail drawings.

Preparation of single wall, double wall Aboveground rectangular fuel tank as per code (UL-142, BS 799-5, STI/SPFA F921)

Preparation of Aboveground single wall, double wall horizontal cylindrical fuel tank as per code

(UL-142, STI/SPFA Fireguard/ F941, BS 2594, BS EN 12285-2, /SPFA F921)

Preparation of Underground single wall, double wall horizontal cylindrical fuel Tank as per code (UL-58/1746, STI P3, BS-2594)

Prepared Equipment arrangement drawings.

Preparation of plate Cutting Plan detail for Storage tanks, Dish ends, Wear plate, top flange plate, stiffener plate, RF Pads and Saddle Supports.

Calculation tank volume, Dish volume, Dish Blank Día.

Prepared drawings for Piping Skids.

Prepared drawings for Structural items and bracings.

Verification of use of appropriate piping material for given application, valves & flange ratings.

Prepared weldmaps for Tanks, and Pipe Skids.

International project Done: -From FABTECH TECHNOLOGIES INTERNATIONAL TURNKEY PHARMACEUTICAL PROJECTS

PHARMACEUTICAL SOLUTIONS INDUSTRY: PSI (SAUDI ARABIA)

M/s UNICARE COSMETICS (RIYADH. SAUDI ARABIA)

SIPCHEM - EVA FILM PROJECT (SAUDI ARABIA)

M/s. INCEPTA PHARMACEUTICAL (BANGLADESH)

RANBAXY PHARMACEUTICAL (NIGERIA)

FIDSON HEALTHCARE PLC PHARMACEUTICAL (NIGERIA)

SAVANNA PHARMACEUTICAL IND CO. (SUDAN)

Detailed Layout:

PHARMACEUTICAL SOLUTIONS INDUSTRY: PSI (SAUDI ARABIA) 1) As Built AHU piping layout

2) As Built Isometric & With BOM.

3) As Built pipe Rack Support & with BOM.

4) As Built Ducting layout.

M/s UNICARE COSMETICS (RIYADH. SAUDI ARABIA)

1) Prepared AHU piping layout.

2) Prepared Isometric With BOM.

3) Prepared pipe Rack Support with BOM.

SIPCHEM - EVA FILM PROJECT (SAUDI ARABIA)

1) Prepared AHU piping layout.

2) Prepared Isometric With BOM.

M/s. INCEPTA PHARMACEUTICAL (BANGLADESH)

1) Prepared AHU piping layout.

2) Prepared Isometric With BOM.

3) Prepared pipe Rack Support with BOM.

RANBAXY PHARMACEUTICAL (NIGERIA)

1) Prepared AHU piping layout & As Built

2) Prepared Isometric & As Built With BOM.

3) Prepared pipe Rack Support & As Built with BOM. 4)As Built Ducting layout.

Domestic Project Done:From R-CAD Drafting&Consulting Engineer

BARC (Bhabha Atomic Research Centre). Tarapur Plant Boiser.

O&NGC (OIL & NATURAL GAS CORPORATION LTD) URAN

DORF KATEL (CHEMICAL(I) PVT.LTD) MIDC Taloja

DEEPAK FERTILISERS &PETROCHEMICAL CO.LTD.MIDC Taloja

MUKAND ENGINEERS LIMITED (STEEL COMPANY) Kalwe,Thane.

ACC. CEAMENT PLANT. (BENGLUR)

WAST WATER TREATMENT PLANT. (UTRAKHAND)

LG COMPANY (PUNE)

BASF COMPANY (Turbhe) Navi Mumbai.

Detailed Layout:

BARC (Bhabha Atomic Research Centre). Tarapur Plant Boiser. 2) Prepared piping layout of Fire pump house & As Built 2) Prepared Isometric & As Built With BOM.

3) Prepared pipe Rack Support & As Built with BOM.

O&NGC (OIL & NATURAL GAS CORPORATION LTD) URAN

1) Prepared piping layout.

2) Isometric layout.

3) pipe Rack Support With BOM.

4) Prepared drawings for Heat Exchanger (U-Tube Bundle, Tube Sheet & Baffle Plates.)

DORF KATEL (CHEMICAL(I)PVT.LTD) MIDC Taloja

1) As Built of Equipment Layout

2) As Built P&ID which includes Instrumentation.

3) As Built Structure layout.

4) Prepared drawings for Firefighting systems for Crude oil Tanks.

DEEPAK FERTILISERS & PETROCHEMICAL CO.LTD.MIDC Taloja 1) As Built Utility piping layout. 1) As Built piping layout of Fire pump house & Isometric With BOM

2) As Built of Equipment Layout.

ACC. CEAMENT PLANT (BENGLUR)

1)As Built of piping layout. Compressed air & process water.

WAST WATER TREATMENT PLANT. (UTRAKHAND)

1) Design of piping Layout and isometric with BOM. & Overall Piping Layout of plant.

LG COMPANY (PUNE)

1) Prepared 1) P&ID 2) Equipment Layout 3) piping layout & isometric With BOM.

MUKAND ENGINEERS LIMITED (STEEL COMPANY) Kalwe,Thane. 1) As Built of Equipment layout.

TECHNICAL QUALIFICATIONS:

* “Piping Draughtsman” Diploma Course from Suvidha Institute of Technology Mumbai (Santacruz). With 1st class.2010

* “Auto CAD” From “CEDTI” CATEL COMPUTERS Mumbai.

(Mohammed Ali Road)

1) 2D Drawings 2) Isometric Technique. 3) 3D Modeling.

* “Mechanical Draughtsman” I.T.I Course With 1 st

Class From Fr.Agnel Industrial Training Centre –

Bandra. 2009

EDUCATIONAL:

* Passed S.S.C. Examination in Mar 2007 through Pune Board. With 1st class.

* Passed H.S.C. Examination in Feb 2008 through Pune Board. With 1st class. COMPUTER PROFICIENCY: -

* Auto CAD – 2009, 2010,2011and 2013

* MS Office, Word & Excel

* Internet & E-Mail

* Completed PDMS Course (Plant Design Management System) PERSONAL DETAILS:

Strengths : Ambitious, dedicated, good at team work. Contact No. : +974********/+974********

Date of Birth : 31th Dec 1988

Sex : Male

Language known : Hindi, Marathi, English

Marital Status : Married

Nationality : Indian

Passport Details

Passport no : K8183381

Date of Issue : 29-01-2013

Date of Expiry : 28-01-2023

I hereby declare that all the information given here by me is true to the best of my knowledge till date. Date:

(Zaheer.S.Shemle )

Contact this candidate