RESUME
THOMAS.C.C
MOB: 057******* Email :*******.******@*****.***
QA/QC WELDING INSPECTOR
OBJECTIVE
My goal is to transit my enthusiasm, creativity and experience into a position, where I continue to provide the strategic and tactical leadership critical to retaining valued customers of an organization. I am certain that my presence in your team will prove to be beneficial to your organization. As such, I would welcome an opportunity to speak with you to evaluate your needs and share my ideas.
CERTIFICATIONS
DIPLOMA IN MECHANICAL ENGINEERING
CSWIP 3.1– TWI- Certified Welding Inspector (CSWIP Cert No: 86310)
NDT -- ASNT Level II-RT, UT, MT, PT
WORK EXPERIENCES
Welding Inspection, NDE Co-ordination, RT/UT/MT/PT/, PMI Evaluation, Piping Inspection, Construction (PETRO CHEMICAL, OIL & GAS FIELD)Over 6 (SIX) years of experience in Construction, Inspection & Testing, Quality Control/Assurance. Proven track record in implementing cost saving measures to achieve substantial reduction in terms of raw materials, manpower and machine utilization and also skill up gradation of team members. Deft at various processes encompassing Inspection, Welding etc.
1.
PROJECT :PP II, MTBE II - IBN ZAHR,SAUDI ARABIA
CLIENT :SABIC
CONTRACTOR :AL MUZAIN
POSITION :WELDING INSPECTOR,
PERIOD : FEB 2020 TO MARCH 2020...
My Job Responsibilities:
Verification of materials, Conduct material receiving inspection prior to release for fabrication.
Monitoring and surveillance for the status of spools erected, pipe supports according to the approved drawings such as Isometric drawing.
Coordinating to engineering for field modification of pipe routing.
Conduct visual and dimensional inspection for all fabricated spools prior to shipping
To ensure that all QC activities are performed timely with no delay to production
To ensure that all the fabrication works are performed to the quality as per specification
Maintaining calibration system of inspection / measuring instruments used in the project
Inspection of welding consumables as per required specification.
Inspection of welding consumables as per required specification.
To ensure that all the fabrication works are performed to the quality as per specification
Documentation
Hydro test Package preparation and review
Verification of Welding traceability
Closing all the Punches & NCR with the given manpower before starting the Pre-Commissioning activities.
Coordinating, administrating, and/or performing inspection activities, document control, and writing reports
Responsible for ensuring that the project is constructed, tested, inspected, and documented in accordance with the project specifications
Verification of Welding traceability
Witness and monitor the NDT, select thewelds for Radiography and Interpretation
Comply and implement established company policies and procedures
2.
PROJECT :ETHANE DEEP RECOVERY FACILITY PROJECT,SAUDI ARABIA
CLIENT :SAUDI ARAMCO
CONTRACTOR :GLOBAL IWI ARABIA (GIWI)
POSITION :WELDING INSPECTOR,
PERIOD : MAY2019 TO DECEMBER 2019...
Check on the proper storage, backing, handling etc. of the welding electrodes &
Control of welding material (Electrode, Filler Wire) backing of Low Hydrogen Electrode.
Preparation of weld map & responsible for the preparing of the Reports.
Ensure edge preparations are carried out and the bevel is clean and the bevel angle is checked prior to fit-up
Witnessing / checking the fit-up and preparation for welding
Weld visual, Dimensional Control.
Checking of the inter pass temperature & recording the parameters as per WPS
Welding inspection (surveillance checks before, during and after welding )
Responsible for the inspection of Pre-and Post-welding.
Monitor welder performance and welding activities to ensure work is being carried out in accordance with the approved welding procedure.
Monitor welder performance and welding activities to ensure work is being carried out in accordance with the approved welding procedure (WPS).
Witnessing Welder’s Qualifications Test (WQT) and qualifying welders for different base metals, thickness and diameter ranges according to ASME Section-IX, Review of Certificates for the same.
Witness of Pre-weld Heat Treatment, Post-weld Heat Treatment.
Visual inspection of final welds.
Inspection of CS (A106- B,API5L-B, A333 Gr6 ), SS (A312 TP 316/316L, A312 TP 304/304L, A312 TP 321) Pipes i.e. joint fit-up, inter pass weld visual, visual inspection of final welds.
Organizing NDT witnessing & reviewing it
Surveillance for storage and handling of Welding Consumables.
3.
PROJECT :SAB TANK MEG PIPELINE REPAIR & PEPLACEMENT WORK
CLIENT :SABIC JUBAIL
CONTRACTOR :EXPERTISE CONTRACTING CO LTD
POSITION :WELDING INSPECTOR,
PERIOD : FEB 2019 TO APRIL 2019...
My Job Responsibilities:
Responsible for planning,organizing and managing the overall activities of receiving quality function
Coordinating, administrating, and/or performing inspection activities, document control, and writing reports
Verification of Welding traceability
Verification of equipment calibration.
Inspection of hydro test package, and hydro testing
Witness and monitor the NDT, select the welds for Radiography and Interpretation
Comply and implement established company policies and procedures
Interface with client representatives
Perform all Fit-ups & Welding Inspection of the work at site/shop as required
Qualification of WPS
Verification of NDT requirements as per Drawing and co-ordination with NDT Sub- contractor
To ensure that all QC activities are performed timely with no delay to production
To ensure that all the fabrication works are performed to the quality as per specification
Maintaining calibration system of inspection / measuring instruments used in the project
Inspection of welding consumables as per required specification.
Make sure that activities should be done in accordance with standard codes of practice, applicable
Monitoring and surveillance for the status of spools erected, pipe supports according to the approved drawings such as Isometric drawing.
Coordinating to engineering for field modification of pipe routing.
Conduct visual and dimensional inspection for all fabricated spools prior to shipping
Ensuring that Engineering Drawings are stamped as “Approved for Construction” and installation
Closing all the Punches & NCR with the given manpower before starting the Pre-Commissioning activities.
Verification of materials, Conduct material receiving inspection prior to release for fabrication.
4.
PROJECT :UPGRADE POTABLE WATER SUPPLY SYSTEM (SGPD)
CLIENT :SAUDI ARAMCO,AL-HASA
CONTRACTOR :H.K.AL SADIQ SONS CONTRACTING CO LTD,,
POSITION :WELDING INSPECTOR,
PERIOD :MARCH 2018 TO JANUARY 2019
My Job Responsibilities:
Responsible for inspection of pipe spools for shop and fabrication such as fit-up, dimensional and visual inspection as per ARAMCO Standards
Prepare Request for Inspection(RFI) to Project Management Team(PMT) and Project Inspection Division through Quality Management Information system
Responsible for planning,organizing and managing the overall activities of receiving quality function
Coordinating, administrating, and/or performing inspection activities, document control, and writing reports
Responsible for ensuring that the project is constructed, tested, inspected, and documented in accordance with the project specifications
Verification of Welding traceability
Verification of equipment calibration.
Witness and monitor the NDT, select the welds for Radiography and Interpretation
Interface with client representatives
Verification of NDT requirements as per Drawing and co-ordination with NDT Sub- contractor
To ensure that all QC activities are performed timely with no delay to production
To ensure that all the fabrication works are performed to the quality as per specification
Maintaining calibration system of inspection / measuring instruments used in the project
Inspection of welding consumables as per required specification.
Review all drawings such as General arrangement drawing, Isometric and P & ID.
Monitoring and surveillance for the status of spools erected, pipe supports according to the approved drawings such as Isometric drawing.
Verification of materials, Conduct material receiving inspection prior to release for fabrication.
5.
PROJECT :GLYCOL RELIABILITY IMPROVEMENT PROJECT
CLIENT :YANPET-SABIC, YANBU
CONTRACTOR :H.K.AL SADIK SONS CONTRACTING CO LTD,,
POSITION :WELDING INSPECTOR,
DUERATION :FEBRUARY 2017 TO MARCH 2018...
My Job Responsibilities:
Responsible for planning,organizing and managing the overall activities of receiving quality function
Coordinating, administrating, and/or performing inspection activities, document control, and writing reports
Responsible for ensuring that the project is constructed, tested, inspected, and documented in accordance with the project specifications
Verification of Welding traceability
Verification of equipment calibration.
Inspection of hydro test package, and hydro testing
Witness and monitor the NDT, select the welds for Radiography and Interpretation
Comply and implement established company policies and procedures
Interface with client representatives
Perform all Fit-ups & Welding Inspection of the work at site/shop as required
Qualification of WPS
Verification of NDT requirements as per Drawing and co-ordination with NDT Sub- contractor
Experience of qualification of PQR for SMAW,GTAW
To ensure that all QC activities are performed timely with no delay to production
To ensure that all the fabrication works are performed to the quality as per specification
Maintaining calibration system of inspection / measuring instruments used in the project
Inspection of welding consumables as per required specification.
Make sure that activities should be done in accordance with standard codes of practice, applicable job specifications, Quality control procedures (QCP) implementation at job site.
Review all drawings such as General arrangement drawing, Isometric and P & ID.
Attending to the inspections and tests, according to the Approved ITP, verifying the inspection results and validating the results.
6.
PROJECT :JAYPEE CEMENT CORPORATION LTD
CLIENT :BHEL
CONTRACTOR :S.K BOILERS PVT LTD
POSITION : WELDING INSPECTOR,
PEROID :OCTOBER 2011 TO MAY 2014
My Job Responsibilities:
Verification of materials, Conduct material receiving inspection prior to release for fabrication.
Monitoring and surveillance for the status of spools erected, pipe supports according to the approved drawings such as Isometric drawing.
Coordinating to engineering for field modification of pipe routing.
Conduct visual and dimensional inspection for all fabricated spools prior to shipping
To ensure that all QC activities are performed timely with no delay to production
To ensure that all the fabrication works are performed to the quality as per specification
Maintaining calibration system of inspection / measuring instruments used in the project
Inspection of welding consumables as per required specification.
Inspection of welding consumables as per required specification.
To ensure that all the fabrication works are performed to the quality as per specification
Documentation
Hydro test Package preparation and review
Verification of Welding traceability
Closing all the Punches & NCR with the given manpower before starting the Pre-Commissioning activities.
Coordinating, administrating, and/or performing inspection activities, document control, and writing reports
Responsible for ensuring that the project is constructed, tested, inspected, and documented in accordance with the project specifications
Verification of Welding traceability
Witness and monitor the NDT, select thewelds for Radiography and Interpretation
Comply and implement established company policies and procedures
7.
PROJECT :BPCL CHOCHIN REFINERY KERALA, INDIA
CLIENT :BHEL
CONTRACTOR :S.K BOILERS PVT LTD
POSITION : WELDING INSPECTOR,
PERIOD :AUGUST 2014 TO JULY 2016.
My Job Responsibilities:
To follow all quality control procedure, inspection and test plan.
Checking joint fit-up & Monitoring and controlling welding consumables.
Familiar with welding inspections that is before, during and after welding activities at site & shop
Reviewing filler wires and electrodes of welding procedure specification
Qualification and performance monitoring of welding personnel.
Supervision and inspection Welding, Pre-heat and Post Weld Heat Treatment of weld.
Development and implementation of inspection checklist and report/format.
Co-ordination of all destructive and Non-destructive testing at various sites for different clients.
Reviewing the spool Releasing check sheet and sending to sites after approving.
Reviewing final Packages for Hydro tests, approving & releasing for Hydro test.
Inspecting fit up and welding as per client specification and ASME B31.3.
Regular walk down surveillance on welding activities.
Daily basis checking of backing and holding procedure of electrode before issuing to welders. As per SEC IX. And SEC II.
Daily basis checking of Qualifiedwelder’s welding activities and Visual inspection of production weld joints. As per ASME SEC IX.
Daily basis checking of production welding joint reports and submit the client for inspection.
Closing the one week production weld joints RFI on weekly basis.
Witnessed Penetrate Testing (PT) for Modification joints, Temporary attachments, etc., and reviewed reports. As per third party procedure andASME SEC V
Reporting to QA/QC management on daily basis.
Witnessing and checking preheat, As per ASME B 31.3.
Check the heat input during production welding on welder basis.
Conduct Welder audit on monthly basis.
Clear the Welding Punch list before final erection of module.
Personal Information:
NAME :THOMAS.C.C
NATIONALITY : INDIA
SEX :MALE
MARITAL STATUS : UNMARRIED
IQAMMA NO : 244-***-****
LANGUAGE KNOW :MALAYALAM ENGLISH, HINDI,TAMIL
PASSPORT NO : K5356083
DATE OF BIRTH : 02/06/1991
Declaration:
I hereby assert you that all the information furnished above are true, complete and correct to the best of my knowledge.
PLACE
DATE THOMAS.C.C