Senior Instrumentation & Control Engineer

Senior Instrumentation & Control Engineer _** Years of Experience

Anandan R ***********************@*****.*** Available in UAE: +971*********

Objective:

Around 17 years of total experience in Oil & Gas Sector for Refinery, Petrochemical and Gas plants for Instrumentation & Control System, Telecom & Fire and Gas System Design in EPC & PMC projects.

Summary of Experience:

1.Experience from Pre-FEED Review, FEED Preparation + Detail Engineering Drawings Preparation + Procurement + Other Instrument deliverables Preparation activities.

2.Handled Instruments & Valves Procurement Activities and Vendor Quotation document Review, Comments and approve activities handled

3.Handled Preparation of specification of instruments

4.Handled development and review of P&IDs

5.Attending SIL Calculation Studies

6.Attended FAT /SAT activity for DCS, ESD, F&G, Vibration Monitoring systems and Telecom Systems.

7.Attended HAZID / HAZOP Studies

8.Worked with Emerson (S600+ Flow Computer) Metering Skid (Coriolis Flow Meter), handled Complete vendor packages.

9.Solving the Technical Query (TQ) raised by the Contractor.

10.Worked with DAC Technologies (Wellhead Control Panel -WHCP) Complete Vendor Package Handled.

11.Installation of CCTV, PA/GA system, EPABX, VSAT.

12.Attended F&G Shell Mapping studies.

Years of Experience:

17 years of experience in Refinery and gas plants - From 2003

Countries Worked:

Iraq Kurdistan, Oman, Abu Dhabi, Saudi Arabia

Following the below mentioned International Standards:

1.Saudi Aramco Standards (SAES-J, SAMS)

2.Shell DEP (DGS 1511)

Detail Professional Experience in Gulf:

KAR Pipeline Engineering & Constructors, Iraq from 20th April 2018 to May 30th 2020

Project Name: Kurdistan Pumping Station 2 Project

SCADA Implementation Project (Honeywell)

Metering Skid project 11 Skids and Valve Electrification Projects

Valve Electrification Project

Position: Senior Instrumentation & Control Engineer

Preparation, Review & Comments writing on below mentioned deliverables:

Complete Vendor package handled for Emerson metering Systems (s600 flow computer) – 11 Skids + Sampling Skid + Compact Prover

Handled Preparation of Specifications for Instrument Cables,

Specification for General Instruments,

Specification for Control Valves,

Specification for MOV,

Specification for Fire & Gas Instruments,

Handled P&ID review and Preparation of Instrument index, I/O list, instrument data sheets, Instrument Wiring Drawing, Preparation of hook ups, Preparation of loop drawings, Preparation of cable schedule, Preparation of MTO, Preparation of Cable Layout Drawings, Preparation of Instrument Location Drawings, Preparation of Cause & Effect Drawing, Preparation of DCS & ESD & Fire & Gas Wiring Drawing. Instrument Cable Block Diagram, Review of Datasheets (PT, TT, FT, FCV, PCV, PRV, TRV).

Telecom Activity:

1, Preparation of EPABX system (40 Channels) for Plant Intercom Facility System.

2, Preparation & Review of PAGA System (30W for Indoor System, 60 W for Outdoor System) Depends on the noise it will vary watts range.

3, Handled VSAT System.

4, Implementing LAN

5, Implementing CCTV System.

FEED Packages: Preparation of - Instrument tagging Philosophy, Instrument Data Base Guidelines During FEED, Foundation Field Bus Specification, Packaged Analyzer System, Tank Gauging System, Terminal Management System, Control System Philosophy, Specification for DCS & ESD Systems, Specification for Vibration Monitoring System (VMS), Specification for Custody Transfer Yield meter, Partial Stroke Testing (PST), Scope of work for Main Automation Contractors

Worley Parson - Arabian Industries Projects (JV)- WPAI, Oman from 05/11/2016 to 10 Jan 2018

Client: Petroleum Development of Oman (PDO)

Project Name: Upgradation of Alnoor Pumping Station & Upgradation of Birba Production Station, Modification of Alnoor wellheads (11 wells) and 4th Ring Remote gather manifold station.

Position: Senior Instrumentation & Control Engineer

My Scope: Preparation of all Instrument deliverables Drawings & Procurement of Wellhead Control Panel (WHCP)

Handled AL Noor Wells # 22, 23, 24, 26, and 27 (Changing of Manual WHCP Well Head Control Panel to Automatic)

Kentz Corporation (TSS), from July 2014 to Oct 2016

Client: Abu Dhabi Gas Industries Limited (GASCO) – ASAB Gas Plant

Project Name: Plant Facilities Project in ASAB Gas Plant

Position: Senior Instrumentation & Control Engineer

My Scope: Handled Detail Engineering Deliverables Preparation, Design Review and comments writing activities executed for Solving Plant change Request (PCR) Projects for operation projects.

Dar Al-Riyadh Consultant (CSSD) KSA, from July 2011 to June 2014

Client: Saudi Aramco Lubricating Oil Refining Company, Yanbu

Project Name: Lube Ref Expansion Project

Position: Lead Instrumentation & Control Engineer

My Scope: Working as a PMC Role for Lube ref Expansion Project, handled review and comments writing & Project Execution activities handled

Review of Engineering Deliverables:, like – Instrument Index (DCS, ESD & Fire & Gas) & Instrument I/O List, Instrument Data Sheet, Instrument Block Diagram, Instrument Cable Schedule, Cause and Effect Drawing, Logic Diagram, Instrument Loop Drawing (ILD), Instrument Junction Box Wiring Drawing, Marshaling Cabinet Wiring Drawing, Review of Telecom wiring, (PA - Public Alarm (or) Paging Drawing Review activities) – In Plant Voice Paging System (Indoors and Outdoor Speakers) – 30 W and 60W, Review of Process flow Diagram (PFD),Review & Approval of Vendor's Drawings & Documents, DCS Wiring Drawing, Stub-Up Drawing, Hook-Up Drawing, Review of P&ID

Engineering Layout Drawings & Standard Installation Details: Preparation, review and monitor the development of - Cable Layout, Tray/Rack/Trench/Duct Bank Layout & Sections, Cable & Conduit Schedule, Cable Tray Load Calculation, Process Interface Building (PIB) Location/Layout Drawing

Procurement Activities: Rising of Enquiry, Review of Vendor Documents, Preparation of Technical Bid Evaluation (TBE), and Selection of correct Instruments.

Instrument Design Selection/Sizing and Calculation:

1.Selection of Temperature Instrument, J, K, T, E, RTD, PT 100.

2.Selection of Instrument Cables such as 16AWG, 18AWG and Individual shield, Overall shield, Single pair, Multi pair cables

3.Participate in HAZOP & HAZID, SIL Studies and Intrinsic safety Calculation

4.Selection & Sizing of Control Valves (CV Calculation)

5.Orifice Plate – Beta ratio Calculation

6.Sizing of Control Valves and Flow Elements, Relief Devices Using Instru Calc Software

7.Selection of Flow Instruments Selection – Mass Measurement, Velocity Measurement, Differential Flow Measurement

8.Experience in CCTV, Public Alarm, Flammable and Toxic Gas Detector Voltage Drop Calculation

Al-Imad Company, KSA from June 2009 to July 2011

Client: Saudi Aramco Uthmaniya Gas Plant (UGP)

Project Name: Up Gradation of Sulfur Recovery Module (SRU) – Train 1 to 5

Position: Instrumentation Engineer

My Scope: Procurement Activities: Handled Instruments & Control Valves and MOV, ESDV valves Procurement activities for UGP projects.

Rising of Enquiry, Review of Vendor Documents, Preparation of Technical Bid Evaluation (TBE), and Selection of correct Instruments.

V.D.Swamy Company, from June 2003 – June 2009:

Client: Tamil Nadu Petrochemical Company (TPCL) – Chennai

Project Name: TPCL Expansion Project, Phase -II

Position: Associate Instrumentation Engineer

Project Duration: April 2006 – June 2009

Client: Chennai Petroleum Corporation Limited – Chennai

Project Name: VDU Revamp at CPCL Plant

Project Name: Up gradation of Analyzer and Fire & Gas Detection System

Project Name: Up gradation of Pumping Station – Fire Water Pumps

Position: Associate Instrumentation Engineer

Project Duration: June 2003 – Feb 2006

Activities: Handled Field Construction Activities Like executing the field Jobs.

Short Term Course Completed:

Training Course: DCS, Yokogawa CS 3000, PLC, SCADA, ESD Systems

Location: Techno Craft Automation, Chennai, India

Training Course: Hazardous Area Training (Class 1, zone 0, 1,2, 3)

Training Course: Permit to Work System

Training Course: Elementary First Aid, Personal Safety and Social Responsibility

Educational Qualification:

Highest Qualification: B.E Instrumentation and Control Engineering,

College Name: Madras Institute of Technology, Chrompet, Tamilnadu, India.

Qualification: Diploma in Electronics and Communication Engineering,

College Name: Thai Moogambigai Polytechnic, Maduravayil, Tamilnadu, India

School Name: S.S.L.C from E.L.M. Fabricious Higher Secondary School, Purasaiwalkkam, Tamilnadu, India.

Personnel Details:

Name: Anandan R

Contact Number: +971********* (Joining: Immediate, Currently in UAE)

Email ID: ***********************@*****.***

Skype Id: anandan.ramachandran1

Date of Birth: 20.11.1983

Passport Number: M 9491000

Languages Known: Tamil & English

Total Working Experience: 17 Years

Contact Details: No.89/106 Semathamman Nagar, 2nd Sector, Koyambedu, Chennai – 107, India.

Declaration

I hereby declare that all the information furnished above is true to the best of my knowledge and belief.

(R. ANANDAN)

Contact this candidate