Resume Santanu Samanta

Location: Sanskar Building, Vishal Nagar, Pune, MH, India

Telephone:+91-882*******

Email: adgczj@r.postjobfree.com/adgczj@r.postjobfree.com Objective

I am Intending to utilize my numerous skills, academic excellence as well as professional experiences to secure a mid to senior position at your renowned organization in the upcoming future. My experiences consume in designing of steel and RCC structures, bill of quantity estimation, structural calculation as well as in project management. Looking for an opportunity in civil/structural design engineering where I could be able to implement my academics and professional experiences together.

Core skills

● Structural Engineering

● Cost-Effective Design and Estimation

● Analytical and Problem Solving

● Communication & Leadership

● Project Management

● Stakeholder Management

Career summary [5.5 years - Oil/Gas/Refinery(4.5years) and Power Plant (1year)] Name of The Company: Heurtey Petrochem (Pune, India) - French MNC, Position: Senior Structural Engineer

(Contractual Role), Duration: May.’20 - Till Date, Industry: EPC- Oil/Gas Process Plant (Equipment Manufacturing) Key responsibilities

● Analysis and design of Fired Heater supporting structure (Modular Steel Structure) including the Radiant, Convection and Stack sections. Size of the structure is around Length (22m.) x Width (14m.) x Height (75m.).

● Various loads are applied for designing the structure such as dead loading including refractory, piping and coil loading etc in various conditions such as empty, operating and test, horizontal piping loads, internal pressure, fireproof loading, live loads etc.. In addition to that wind loading has applied on the structure for both static and dynamic conditions. Then earthquake loading is taken care of to follow the response spectrum method. Eventually, the base plate and anchor bolt is also designed using excel spreadsheet calculations.

● Reviewed the mechanical General Arrangement Drawing (GAD), Interdiscipline communication to convey the message of structural needs such as piping load data, mechanical equipment loads as well as to verify the structure is safe from other structures. Reviewed 3D model, Prepared CRS during the document submission to the client.

● Analysis and design of Steel Stack tower (40m height) including Flare and Helical Strakes for both corroded and uncorroded conditions, Load cases mentioned above are also applied over here for analysis. Checked and verified the utilization ratio for the plate elements at each level/zone, Designed the Stack Anchor Base using excel spreadsheet calculation.

Major Projects

● Visakh Refinery Modernization Project, India, Client - HPCL. Name of The Company: Holtec International (Asia) Pvt. Limited (Pune, India) - US MNC, Position: Structural Engineer, Duration: Sept.’19 - April’20, Industry: EPC- Nuclear Power Plant Key responsibilities

● Analysis and design of duct support, guide support, saddle support, lock point including steel truss bridge and steel frame, operating platform . In addition, the design of foundations of those supports.

● Analysis and design of steel structural platforms following American standards including various loads and their combinations. Interdiscipline communication to convey the message of structural needs such as load data as well as to verify the structure is safe from other structures. Reviewed 3D model.

● Connection design - Shear and moment connection, base plate and anchor bolt (both hinged and fixed conditions), insert plate under the design criteria such as shear, tension, rupture.

● Checked and reviewed the analysis and design of Air cooled condenser structure including columns, fan deck, mono rail, wind wall and other structural members, provided comments to the vendor for changes or updates in design.

● Prepared design calculation report of the structures mentioned above which are checked by the Client. Major Projects

● Jackson Generation, United States, Client - Kiewit Corporation. Name of The Company: Doosan Power System (Gurgaon, India) - Korean MNC, Position: Senior Civil/Structural Design Engineer (Contractual Role), Duration: June’19 - Sept.’19, Industry: EPC- Thermal Power Plant Key responsibilities

● Analysis and design of steel structures such as pipe rack, cable rack, pump house, operating platform inside the plant, static and dynamic machine foundation (pile-supported), CW chlorination building including piping, 1 Page

valve, pump, C&I, equipment and accessories altogether.

● Substructure foundation design including isolated, combined and raft footing under the design criteria of bearing pressure, shear stress, bending moment, stability, buoyancy and overturning.

● Analysis and design of pile foundation including pile cap design, nos of pile requirements and other criteria.

● Reviewed FEED drawings, 2-D drawings, 3-D model, prepared design calculation report, comment resolution sheet, material BOQ comparison report (detailed engineering quantity and pre bid engineering quantity), participated in interdisciplinary communication.

Major Projects

● Jawaharpur Super Power Plant (2x660 MW), India, Client- NTPC. Name of The Company: Samsung Engineering (Noida, India) - Korean MNC, Position: Engineer II

(Civil/Structural/Architectural), Duration: June’18 - Aug.’18, Industry: EPC- Onshore Oil/Gas/Refinery Key responsibilities

● Analysis and design of underground structures such as water basin, sump pit with calculating various loads and moments using excel.

● Equipment Foundation design such as horizontal vessel, pump, valve, compressor following the vendor drawings and prepared design calculation report once finalized the design. Used AutoCAD to modify changes in 2-D drawings for incorporating the comments received from clients.

● Reviewed and commented on vendor/3rd party files for any missing terms or any doubts regarding the scope, intra-disciplines communication for positioning or shifting the equipment if required. Major Projects

● Jubail Petrochemical Complex, Saudi Arabia, Client - SABIC. Name of The Company: Larsen & Toubro Hydrocarbon Engineering (Delhi/Vadodara, India) - Indian MNC, Position: Engineer II (Civil/Structural/Architectural), Duration: Aug.’14 - June’18,Industry: EPC- Onshore Oil/Gas/Pipeline Key responsibilities

● Analysis and design of various RC structures including RWS building, electrical and equipment building, substation building, repeater building, security room, and their foundations.

● Analysis and Design of several industrial steel structures such as pipe rack, pipe bridge, valve operating platform, shelter, valves, and chemical injection shelter, car parking shed, modular structure, and their foundations. In addition, the design of the base plate and anchor bolts.

● General civil engineering design - Boundary wall, pipe culvert, pipe supports, road and pavement, excavation and filling, oil-water separators, checked and reviewed plot plans, standard drawings, assisted to the designers for updating the drawing before client submission.

● Prepared design calculation document during the detailed engineering stage and geotechnical MR for the pre-bid stage, bid and tender evaluation, scope finalization, MTO calculation.

● Detailed review on project progress at the engineering stage, assisting to senior engineer/lead, Quality improvement of company’s own codes, also built some standard sheets for design implementing international design standards (American).

● Frequent communication with clients, presented towards them about the progress, took approval from the project management consultant/client, and prepared an hour schedule for functional scope. Major Projects

● Extension of West Basin, India, Client- Oil and Natural Gas Corporation of India;

● Midyan Gas Processing Facilities, Saudi Arabia, Client- Saudi Aramco;

● Pipeline Project (DNEPL-RGPL), India, Client- Reliance Industries Limited;

● GC-30, Kuwait, Client- Kuwait Oil Company.

Education and qualifications

M.Tech (Master of Technology) in Structural Engineering (Full Time), Grade – 3.53/4.0 (US grading), 8.29/10.0

(Indian grading), Indian Institute of Technology Guwahati (IITG)– Aug'12 - July'14 - Completed Relevant Coursework: Advanced Structural Design, Finite Element in Engineering, Structural Dynamics, Fracture Mechanics, Bridge Engineering, Optimization Techniques. B.Tech (Bachelor of Technology) in Civil Engineering (Full Time), Grade – 3.75/4.0 (US grading), 9.06/10.0 (Indian grading), West Bengal University of Technology (WBUT), India – July ‘08 - June'12 - Completed Relevant Coursework: Strength of Materials, Structural Analysis and Design, Design of Steel Structure, Concrete Technology, Construction Management, Soil and Foundation Engineering, Estimation and Costing. Public Examinations

2 Page

● Graduate Aptitude Test in Engineering - AIR 517 (Year-2011); Codes & Standards

● Indian Codes and Standards (IS:456-2000, IS:800-2007, SP-6, SP-16, IS:875 all parts, IS:1893-2002); American Codes and Standards (ACI:318, AISC, ASCE:07);

Language known

● English - Writing + Speaking + Reading + Listening - Fluent, Bengali - Native Language, Hindi - Speaking + Reading + Listening - Fluent, Writing - Intermediate. Software Skills

● Microsoft Package (Office, Excel, Powerpoint), Pivot Table, Smart Plant Review, Naviswork,Foundation-3D, Staad Pro, MAT 3D, LS Dyna, RISA, AutoCad;

Publication

● Conference Paper - Title - Capacity estimation of a RC structural element (such as Slab) subjected to impact loading, Publisher - Springer India, Book - Advances in Structural Engineering, Page -301-312. 3 Page

Contact this candidate