CURRICULUM VITAE

PERSONAL DATA

Name & full name: MOHAMED MELIANI

Address: cooperative en-nour villa N 343,bir el djir –Oran. Algeria.

postal code :31130

Home Tel. +213********

Mobile Tel. +213-*********

Email .adgcjm@r.postjobfree.com

EXPERIENCE SUMMARY:

From July 18 2016

training for news Seniors Technicians for the new plant at Hassi Berkine (Sud of Algeria)the American’s company ANADARKO;

Development of the instrumentation program

I conduct the class room and On job Training for the Trainees.

I develop training materials, handout, & prepare monthly assessments /assignments.

I provide necessary feedback on performance /evaluation of target candidates.

I provide necessary mentoring to target candidates.

I prepare the training plan for the new intake for Trainees.

I prepareif is necessary the training programs as and when

Client needs.

The theoretical and practical (workshop and field)on training of young students to become qualified Instrumentation technicians.

The courses taught are:

HSE, Hand tools, Electronic, all types of transmitters, all measuring instruments, equipment testing, Systems Detection Fire and Gas, SIS & ESD, PI & D, all types of valves, hazardous areas and protection, isolation and installation of security equipment, workshop, Tubes and fittings systems for measuring liquid and gas tax, PLC, DCS,SCADA .

From April 2016 until May 2016

Instrument Instructor training center (CFST) Oran Algeria.

Training in instrumentation young students to private training center (CFST) Oran Algeria.

The courses are offered:

HSE, all types of transmitters, all measuring instruments, testing equipment, fire detection systems and gas and ESD& SIS, PI & D, all types of valves, hazardous areas and the protection, insulation and the installation of safety equipment, workshop, pipes and fittings systems for measuring liquid and gas taxation, safety PLC, DCS, SCADA.

From April 2013 until February 2015.

Instrument Instructor training center (CFST) Oran Algeria.

Training in instrumentation young students to private training center (CFST) Oran Algeria.

The courses are offered:

HSE, all types of transmitters, all measuring instruments, testing equipment, fire detection systems and gas and ESD& SIS, PI & D, all types of valves, hazardous areas and the protection, insulation and the installation of safety equipment, workshop, pipes and fittings systems for measuring liquid and gas taxation, safety PLC, DCS, SCADA.

From 16 May 2012 until 2013.

Instrument Instructor/OJT/Assesor/Trainer Petrofac Company in Hassi-Messaoud.(Algeria)

I conduct training for news young students to training center (Petrofac) Hassi-Messaoud Algeria.

I conduct the class room and On job Training for the Trainees.

I develop training materials, handout, & prepare monthly assessments /assignments.

I provide necessary feedback on performance /evaluation of target candidates.

I provide necessary mentoring to target candidates.

I prepare the training plan for the new intake for Trainees.

I prepareif is necessary the training programs as and when

Client needs.

The theoretical and practical (workshop and field)on training of young students to become qualified Instrumentation technicians.

The courses taught are:

HSE, Hand tools, Electronic, all types of transmitters, all measuring instruments, equipment testing, Systems Detection Fire and Gas, SIS & ESD, PI & D, all types of valves, hazardous areas and protection, isolation and installation of security equipment, workshop, Tubes and fittings systems for measuring liquid and gas tax, PLC, DCS,SCADA .

Instrument Engineer (Inspector Senior ) QA/QC with Bentini/Saipem Company

(Project :LNG 3) Arzew.

Inspection instruments calibration checks at the calibration workshop

Inspection QA /QC and Pre-Commissioning of all the instrumentation part in LNG tanks, propane and butane.

Documents used: ITP, QCP, RFI, QA/QC&NCR.PID’s etc…

From October 2011 to March 2012

Instrument Instructor/OJT/Assesor/Trainer Petrofac Company in Hassi-Messaoud.(Algeria)

I conduct training for Technicians in the plant.

I conduct the class room and On job Training for the Trainees.

I develop training materials, handout, & prepare monthly assessments /assignments.

I provide necessary feedback on performance /evaluation of target candidates.

I provide necessary mentoring to target candidates.

I prepare the training plan for the new intake for Trainees.

I prepareif is necessary the training programs as and when

Client needs.

The theoretical and practical (workshop and field)on training of young students to become qualified Instrumentation technicians.

The courses taught are:

HSE, Hand tools, Electronic, all types of transmitters, all measuring instruments, equipment testing, Systems Detection Fire and Gas, SIS & ESD, PI & D, all types of valves, hazardous areas and protection, isolation and installation of security equipment, workshop, Tubes and fittings systems for measuring liquid and gas tax, PLC, DCS,SCADA .

From Avril2010 to September 2011

Instrument Engineer QA/QCwith Lead Company (Project :LNG 3) Arzew.

Inspection instruments calibration checks at the calibration workshop

Inspection QA/QC and Pre-Commissioning of all the instrumentation part in the Three Gas Turbine A, B& C.

Documents used: ITP, QCP, RFI, QA/QC&NCR PID’s etc…

From September 2007 to September 2009

Head of Instrumentation Service for Desalination Plant in Algeria with in SOGEX (OmanCompany)

Commissionning,start-up and Maintenance by Manage and optimize the use of instrumentation and control equipment.

Save the operations observed in terms of maintenance.

Manage by controlling the equipment and maintenance of plant stop.

Minimize the command list of maintenance

Responsible for Maintenance planning and scheduling activities related to preventive, predictive, corrective and shutdown maintenance activities SAP&PM. /CMMS.

Direct and coordinate activities with subordinates

Plan and estimate man-hours.

Update daily and weekly reports

Ensure availability of spare parts with material department.

Coordinate & Supervise maintenance activities and repair all instruments and control of this sections :

process section, analyzer section, utilities and offsites,turbine and compressor control, and workshop section.

Rotating instrument equipment

Mark v

DCS

SCADA

2006 to 2007

Lead instrument Commissioning Engineer at ConsolidatedConstractors Company (CCC) OMAN L.L.C at Muscat Refinery .

ISOMERISATION &REFINERY REVAMP PROJECT.

By OILEXEC OFFICE, Abu Dhabi.

Revamping of refinery Muscat (Sultana of Oman), for the installation of a DCS (Distributed Control System) YOKOGAWA.

- Reviews drawings, as-build and specifications and other documents prepared by contractors / consultants

Ensures materials comply with company standards and are correct specification for the duty. Performs technical evaluation of material bids including technical clarification to bidders through Procurement Department.

- Defines the scope of each Divisions involvement during procurement and construction and pre-commissioning phases of the modification.

- Carries out pre-commissioning checks on the completed work to ensure that construction is to the approved design. Continue to monitor modification from conception through to commissioning. -

- Carries out pre-commissioning checks on the completed work to ensure that construction is to the approved design. Continue to monitor modification from conception through to commissioning. -

- Carries out Technical bids evaluation and technical clarification from bidders and finally recommend the most successful bidder from Technical point of view.

- Prepares specification and design data sheet for the purchase of instrument equipments and accessories.

Lead, Control and check:

Involved in the installation,to prepare all the instruments fils,PID,from the supply request and data sheets of the equipments to the pre-commissioning, commissiong&, final test and start-up;

Loop Check, logic test for DCS/ ESD systems

Loop check, logic test for Fire & Gas system

Commissioning of field instruments

final test and start-up/shutdown.

January 2006- to July 2006

As project & Instrument Engineer at the FORAID company ( SPIE) .

Involved in engineering studies, elaborate technical requirements, analyze proposals for to install new Instruments, optic fiber between oil field and the DCS in control room,for GTFT company in South Algeria.

September 2005 to December 2006

As commissioning Instrument engineer at SAFIR company ( Arzew- Algeria)

In charge installation,commissioning& pre commissioning &start-up of the new station of product fuel from refinery of Arzew .Algeria.

October 2004 – June 2005

As technical-commercial engineer at MESURELEC company ( From algers)

In charge the sale of electronic/Instrumentation Oil&Gas and measure equipments .

September 1981- April 2003

Head of Instrumentation Service at SONATRACH Company LNG-2 Plant Liquefaction . Arzew. Algeria.

Coordinate activities with four sections : process section, analyzer section, utilities and

offsites section and workshop section.

Experience types of instruments such as transmitters, pr. switches, control valves,

I/P converters, mass flow meters and analyzers and all related

work such as cabling, impulse piping, termination, loop checking, control room

equipments etc.

I was responsible for preparation of P&ID Mark-up, Instrument Index, IO List, Functional

Schematic and Loop Drawings, Preparation of Specification for Instruments .

The main object of this project is to replace the existing pneumatic instruments with Foxboro IA DCS system and TMR PLC during planned shut down and Online

Survey of field instruments, control room, and systems, preparation of site survey report to client.

Preparation of data sheets, plant database, loop drawings, wiring drawings, cable scheduling, logic drawings, control room layout.

Fire and Gas System : A.B.B

Logic test for DCS/ESD : ABB, I was responsible for preparation of P&ID Mark-up, Instrument Index, IO List.

Schematic and Loop Drawings, Preparation of Specification for Instruments .

The main object of this project is to replace the existing pneumatic instruments with Foxboro IA DCS (I was responsible for preparation of P&ID Mark-up, Instrument Index, IO List).

The main object of this project is to replace the existing pneumatic instruments with Foxboro IA DCS system and TMR PLC during planned shut down and Online

Survey of field instruments, control room, and systems, preparation of site survey report to client.

Preparation of data sheets, plant database, loop drawings, wiring drawings, cable scheduling, logic drawings, control room layout. I was responsible for preparation of P&ID Mark-up, Instrument Index, IO List, Functional .

Schematic and Loop Drawings, Preparation of Specification for Instruments

DCS : Honeywell TDC 3000, ABB.

PLC : Triconex, ABB, Siemens, Allen Bradley.

From may 1999 to july 2003.

Instrumentation Instructor /Trainer/Assessor, at LNG 2 (SONATRACH) Arzew Algeria.

I assured the following courses for Technicians, with simulator (from Arzew, Skikda, South Algeria ):

I conduct training for Technicians in the plant.

I conduct the class room and On job Training for the Trainees.

I develop training materials, handout, & prepare monthly assessments /assignments.

I provide necessary feedback on performance /evaluation of target candidates.

1) HSE

2) Instrumentation/Control (DCS (Distributed Control System) Honeywell TDC 3000)

3)Instrumentation Operating principle, handling and operation, maintenance,troubleshooting on

.

September 1989 to April 1990.

RASCO Company( Lybia).

PROJETS :

-REFINERY OF RAS LANOUF ( RASCO, Libya)

Missions : As Instrument Leed Engineer

Direct and coordinate activities with subordinates

Plan and estimate man-hours.

Update daily and weekly reports

Ensure availability of spare parts with material department.

Coordinate activities and repair all instruments of this four sections : process section, analyzer section, utilities and offsites section and workshop section,andSmoke/Fire/Gas and Security systems.

1978-1981

Instrument supervisor at the BECHTEL INTERNATIONAL.INC for the construction of LNG 1 PLANT ( SONATRACH) ARZEW.ALGERIA.

Involved in the installation,to prepare all the instruments fils,PID,from the supply request and data sheets of the equipments to the pre-commissioning, commissiong&, final test and start-up/Shutdown.

Loop Check, logic test for DCS/ ESD systems

Loop check, logic test for Fire & Gas system

Commissioning of field instruments

Commissioning of compressors, boilers, turbine

Sequence test for dryers and furnace

Serial link checking between PLC &DCS

Commissioning of Fire &Gas system

Experienced in Bentley Nevada vibration monitoring system

1975-1977

Instrument supervisor at the BECHTEL INTERNATIONAL.INC for the construction of LNG 2 PLANT ( SONATRACH) ARZEW.ALGERIA.

Involved in the installation,to prepare all the instruments fils,PID,from the supply request and data sheets of the equipments to the pre-commissioning,commissiong&, final test and start-up/Shutdown.

Pre-commissioning &Commissioning Activities

Loop Check, logic test for DCS/ ESD systems

Loop check, logic test for Fire & Gas system

Commissioning of field instruments

Commissioning of compressors, boilers, turbine

Sequence test for dryers and furnace

Serial link checking between PLC &DCS

Commissioning of Fire &Gas system

Experienced in Bentley Nevada vibration monitoring system

SPECIFIC EXPERIENCE .

Includes as: Instrumentation Assessor/trainer/instructor

Head of Instrumentation Service

Includes revamping and maintenance of six LNG process trains, offsites and utilities using DCS HONEYWELL TDC-3000 Advanced Process Manager, PHD system of HONEYWELL, Modicon and Triconex TS3000 V9 (Boilers' burner management system), pre-commissioning and startup of LNG plant equipments such as gas treatment, turbocompressors, desalination units, water treatment units, air dryers and compressors, turbogenerators, loading pumps and loading docks.

Includes experience in revamping of 120T/H and 400T/H ABB process boilers and boiler

Includes experience in ESD (Emergency Shutdown) and SPS (Safety Protection System), compressor surge control, WOODWARD 509 governor, 120T/H and 400T/H boiler control, Triconex TS 3000 V9 and MODICON PLC, vibration monitoring system Bently Nevada 3300

Includes Startup /Shutdown.

Includes experience in Applied Automation chromatographs, and Rosemount conductivity and ph analyzers, and Panametrics moister analysers, and Sarasota specific gravity analyzers.Scada.

Includes experience in Sientific Instrument for LNG tank level, specific gravity and température measurement using only one sensor.

Includes experience in Smoke/Fire/Gas and Security systems (Delphian, Zellweger, Angus, Pyrotronics, Fenwal, Sabo).

Includes experience in low and high foam expansion for LNG and GAZOLINE tanks.

Includes experience in GAITRONICS paging system.

Includes experience in cctv system.

IncludedesCommunications Equipments at: Communications international

Motorola Group International Technical Training Schaumburg (Chicago) U.S.A

QUALIFICATIONS

From Jannuary to april 2003 : English language training at: Centre

des techniques appliqué-Arzew.Algeria

2001 : Diploma in specialize management by

I.D.R.H Oran .Algéria

2000 : Diploma of consulting and Assessor /trainer for the industry

Diploma from Germany

1985-1988 : Electronic Engineer Belgium

1969-1972 : Electronic Senior Technician Diploma

at : E.P.S InstituteParis.France

COMPUTER SKILLS : Fully conversant with MS Office

Applications

TRAINING & SEMINARS

Certificatof Instructor/Trainer From CPE Institutfrom Sonatrach.

Diploma of Assesor / TrainerEquivalent of8510IVQDiplomaat level 3From the School ofScience&Technologyof Oran

Certificat of Instrument Instructor /Trainer as :D.C.S/Maintenance.TDC 3000HoneywellPARIS FRANCE

Certificat of Instrument Instructor /Trainer as :D.C.S/ Technical TDC 3000HoneywellBRUSSELS BELGIUM

Certificat of Instrument Instructor /Trainer as :P.L.C at the Sonatrach training center CPE, Bethioua, Algeria.

Certificatof MS Excel at the CPE.

MS word at the CPE

Certificat of : English langage training at the CPE.

Certificat of : Seminar on diagnosis and Interpretation of vibrations Bently

Nevada 3300 at the C.P.E

Certificat of : Analyseurs at the training Center L.N.G.2 Algeria

Certificat of : Communications Equipments at: Communications international

Motorola Group International Technical Training Schaumburg (Chicago) U.S.A

Certificat of : Data logger System. Perkin –Elmer

atAutomation.Inc: Applied Technical Training. Tulsa . U.S.A.

Contact this candidate