Senior Assembly and Test Technician
Resume:
JULIUS ALLAN T. FERNANDEZ
#**M.ROXAS ST. LOWER BROOKSIDE,
BAGUIO CITY, PHILIPPINES 2600
adgc96@r.postjobfree.com
adgc96@r.postjobfree.com
OBJECTIVE
To obtain a position in a prominent organization that will enable me to use my seventeen years of technical skills to promote customer satisfaction and contribute to the company’s growth and success.
PROFESSIONAL EXPERIENCE
1.MOOG CONTROLS CORPORATION Feb 2011-Present
Aircraft Group-Philippine Branch
Baguio City Economic Zone, Baguio City
Senior Assembly and Test Technician
High Lift Systems Segment
Responsibilities:
oPerforms precision Assembly and Test operations for Airbus A350-900 and A350-1000 Geared Rotary Actuator.
oPerforms precision Assembly and Test operations for Boeing 787 and 777 Aircrafts High Lift System Actuators
Trailing Edge Actuators: 787 Geared Rotary Actuators, Power Drive Unit, Variable Camber Trim Unit, Angle Gearboxes.
Leading Edge Actuators: 787 Inboard, Outboard, Offset Gearboxes, SLAT Assembly.
Gulfstream Ballscrew Flap Actuators.
oPerform Overhaul, Repair and Upgrade on all Highlift Actuators.
Process workorder and Performed incoming test
Create paper works and evaluate test report
Tag items needed as replacement
Communicate to production planner and line leader for any development.
oAssembly and Test of Electrohydraulic servo-valves for both Boeing and Airbus.
oOperate hydraulic pump like Parker to provide 5000 to 7000psi supply pressure to production area to simulate the actual load on test rigs during flight.
oInstall hydraulic hoses on hydraulic motor during testing of actuators.
oSpecial Skills performed: Soldering (J-STD), Crimping, Lee Plugging, Hydraulic Insert Installation, Spray Painting, Metal Polishing, Sand Blasting, Soda Blasting, Sealant Application, Basic Welding and use of Overhead Crane and Lifting Equipment.
oWorks from assembly drawings, blueprints, worksheets/instructions, parts list, test specifications, and other instructions both written and oral.
oUtilizes a variety of mechanical measuring equipment such as torque wrenches, dial indicators, calipers, precision micrometers, depth micrometers, height gauge, power tools, filler gauge and pneumatic drivers to obtain proper build requirement.
oSets-up Test Rig mechanical fixtures and interface for different models to test.
oTest actuators and rework failed units to achieve test parameter requirement.
oWorks with Product Engineering in diagnosing necessary rework on units that failed testing.
oSuggest useful changes in operation instructions for process improvement.
oCleans components at required cleanliness level.
Train new Technicians to be part of Assembly and Test Department.
Understanding of Lean Manufacturing, 5S and Operational Improvement.
2.MOOG CONTROLS CORPORATION Apr 2007-Jul 2009
Aircraft Group-Philippine Branch
Baguio City Economic Zone, Baguio City
Hydraulic Technician
Responsibilities:
oAssembly and Test of Hydraulic actuators or cylinders using a variety of assembly tools and fixtures like caliper, micrometers, open wrench, dial indicator, torque wrench to attain proper build. Procedures are based on assembly drawings and instruction.
oOperate and maintain hydraulic pump like Parker to provide 5000 to 7000psi supply pressure to production area to simulate the actual load during flight.
oRework or disassemble cylinders that does not meet test requirement parameters.
Career Highlights:
Airbus A350-1000 Geared Rotary Actuator Transfer Technician (Jul-Oct 2018) Moog Aircraft Group Torrance Operations –Torrance, California, USA
Boeing 787-9 Trailing Edge Geared Rotary Actuator Transfer Technician (Jul-Oct 2011)
Moog Aircraft Group Wolverhampton Operations –Wolverhampton, England, UK
3.TEXAS INSTRUMENTS PHILIPINES INCORPORATED Oct 2006-Mar 2007
Baguio City Economic Zone, Baguio City
Product Engineering Apprentice
Responsibilities:
oConduct evaluation on units that failed test requirement.
oSet-up IC handler like Epson and Yokogawa with tester for engineering purposes.
oMake use of correlation units to obtain proper set-up.
oVerify defect through x-ray machines and the use of chemical solution to expose units.
oProvide analysis and disposition and report to Engineering Supervisor.
oMake fast recommendation to verify/repair assembly machines that produces defective units.
4.SILICONWARE PRECISION INDUSTRIES LTD. Aug 1999-Nov 2005
Science-based Industrial Park, Hsinchu, Taiwan
Test Equipment Technician
Responsibilities:
oSet-up IC handler and tester for engineering and production use.
oMake use of correlation units for proper set-up.
oUse Liquid Nitrogen tank for testing units at -55deg Celsius.
oVerify defective units/outlier lot.
oProvide analysis and disposition through gathered data.
oMaintain line balance and attend to defective machine the fastest possible time to reduce down time.
EDUCATION
Technical Training,
Moog Aircraft Group
Torrance Operations
Torrance, California, USA (July 2018)
Moog Aircraft Group
Wolverhampton Operations
Wolverhampton, England
United Kingdom (July 2011)
Instrumentation and Controls Servicing NCII,
Technical Education and Skills Development Authority
Baguio City -Mar 2013
Mechatronics Servicing NCII
Technical Education and Skills Development Authority
Baguio City -Dec 2012
CNC Programming and Machining
Technical Education and Skills Development Authority
Baguio City –Dec 2009
General Machining (Conventional)
Technical Education and Skills Development Authority
Baguio City –Mar 2009
B.S. Electronics and Communication Engineering(undergraduate)
Colegio de Dagupan
Dagupan City –Jun 1997-Oct 1998
B.S. Civil Engineering
Notre Dame University
Cotabato City –Jun 1996-Mar 1997
Notre Dame of Cotabato High School Department
Cotabato City –Jun 1992-Mar 1996
Notre Dame of Cotabato Elementary Department
Cotabato City –Jun 1986-Mar 1992
Trainings and Certifications:
1.Instrumentation and Controls NCII
2.Mechatronics Servicing NCII
3.European Aviation Safety Agency(EASA) Part 145
4.Federal Aviation Administration(FAA) Part 145
5.European Aviation Safety Agency(EASA) Human Factor
6.Transport Canada Civil Aviation(TCCA) Part 1
7.Assembly and Test Audit Operator
8.Torque Process and Measurement
9.Manufacturing Metrology
10.Applied SPC for Operators with Q-Das Procella
11.Statistical Process Control
12.Blueprint Reading
13.Geometric Dimensioning and Tolerancing
14.Leadership
15.5S and Lean Manufacturing
16.Foreign Object Damage Prevention
17.Liquid Nitrogen Handling
18.Hydraulic Insert Installation
19.Lee Plugging
20.Crimping
21.J-Standard/Military Standard Soldering Wires and Terminals
22.Chemical Conversion Coating
23.Paint Touch-up
24.Respirator
25.Red Cross First Aider Member
SKILLS AND TRAITS
Dependable and Trustworthy
Customer-oriented and self-motivated
Flexible and a great team-player
Great troubleshooting skills and attention to detail
Can easily adapt to new work system
Can work with minimal supervision
Knowledge in Microsoft Word and Excel
Communicates well in English and some Mandarin
PERSONAL INFORMATION
Age: 41
Born: Mar. 24, 1979
Height: 5’8”
Weight: 180 lbs.
Spouse: Melanie J. Fernandez
Children: Cyrus Lance(18yrs.), Cyrene Julia(12yrs.), Aaron Troy(10yrs.)
Father: Virgilio C. Fernandez
Mother: Teresita T. Fernandez
Siblings: Lester, Lloyd, Therese
PERSONAL REFERENCE
Karen Loria
Moog Controls Corporation (Philippine Branch)
People Resource Developer
adgc96@r.postjobfree.com
Herson Ulep
Moog Controls Corporation (Philippine Branch)
Cluster Leader/Supervisor
adgc96@r.postjobfree.com
Contact this candidate