Ramona Chandler

**** *********** *****

Oklahoma City, Oklahoma, 73132 US

405-***-**** (mobile)

adg9nu@r.postjobfree.com

Desired Locations: United States, national and international travel included

Work Experience: Federal and non-federal aviation experience

11/2018 – Present

Metaspecialaerospace Aviation

5600 NW 50th st

Oklahoma City, Ok 73132

Salary: 32.00 USD per hour

Type: Full time

Position: A&P aircraft mechanic

Complete overhaul and repair of the following aircraft: Beechcraft King Air 300 and 350

Series aircraft, Beechcraft Airliner 1900s, Beechcraft Hawker, Cessna Caravan, Cessna

Citation, Cessna Conquest, DE Havilland Dash 8 200 and 300 series. Performed buildup and teardown procedures on multiple Pratt and Whitney PT6 and Rolls Royce engines. Performed heavy A and L check inspection of the above mentioned aircraft. Performed flight control balancing and rigging. Operated engines and landing gear for functionality tests. Completed propeller changes and overhauls. Performed engine “run up” trim and throttle rigging procedures. Performed safe and proficient use of ground support equipment Performed and supervised the storage program of the DE Havilland Dash 8 series 200 and 300 aircraft. Performed complex component installations and removals. Performed defueling and refueling of the above mentioned aircraft. Utilized aircraft engineering data and drawings for inspection, repair, and troubleshooting procedures. Performed simple electrical diagnosis and repairs.

‘

08/2018- Present

Team Global

VTMAE Mobil Alabama

Global Recruiting Agency

Worldwide

Salary: 33.00 USD per hour

Type: Full time

Position: A&P aircraft mechanic

Complete overhaul of Boeing 737, 747, 777 and MD-80 aircraft. Performed inspections including performing heavy A, B, C, and D checks in an MRO environment. Aircraft marshalling, launch & recovery, jacking, weight & balance, defueling, refueling, and fuel cell entry of the above mentioned aircraft. Removed and replaced major and minor components of the structure and powerplant sections of the Boeing 737,747,777. Performed tail and wing engine change procedures on the Boeing 700 series aircraft. Performed flight control and engine throttle rigging. Effectively directed the work of less experienced employees, ensuring work adhered to high quality standards.

01/2018 – 08/21018

AAR Corp

6611 n. Meridian Avenue

Oklahoma City, OK 73111

Salary: 19.50 per hour

Type: Full time

Position: A&P aircraft mechanic

Complete overhauls of CRJ200, CRJ700, and CRJ900 aircraft interior including cleaning, disassembly, inspection, reinstallation, removal, and repair. Responsible for interpreting and reading aircraft blueprints, engineering drawings, service bulletins, and aircraft manuals. Disassembled, inspected, reassembled and repaired aircraft cabins and furnishings including carpeting, galleys, lavatories, overhead compartments, panels (exterior and interior), and seats. Accomplished simple sheet metal tasks. Identified pressurized areas of aircraft for functionality checks and operations. Perform operational checks and tests on electrical systems pertaining to any interior systems. Light rigging. Utilized all hand tools including drills, rivets guns, and precision measurement equipment. Also responsible for upkeep of CRJ 200, 700, and 900 series exterior skin panels.

06/2014 – 10/2017

United States Department of Defense

Tinker Air Force Base (This is a federal job)

3001 Staff Drive

Oklahoma City, OK 73145

Salary: 22.49 USD per hour

Type: Full time, Series 8852, Pay Plan WG, Grade 8

Position: Aircraft Mechanic/Fuel System and Equipment Specialist

Adhered to confined space precautions and procedures. Cleaned, inspected, removed, and installed aircraft wing and body tank fuel bladders. Install and remove boost and override pumps. Repair wing and body tank fuel vent systems. Perform operational checks of fuel feed systems, gravity transfer, fuel valves, and fuel dump systems. Perform vent checks on forward, aft, wing, and upper deck tanks. Remove and install electrical cable conduit in fuel systems. Perform MultiRAE LEL meter checks. Inspect, install, and remove electronic fuel quantity probes. Install and remove air refueling components and plumbing. Performed complex sheet metal structural repairs after diagnosing leaks and repairing aircraft fuel tanks.

04/2010 – 06/2014

United States Department of Defense

Tinker Air Force Base (This is a federal job)

3001 Staff Drive

Oklahoma City, OK 73145

Salary: 22.49 USD per hour

Type: Full time, Series 8840, Pay Plan WG, Grade 07

Position: Aircraft Parts and Equipment Specialist

I assembled and disassembled jet engine parts with limited supervision. I performed engine Quick Engine Change (QEC) disassembly, inspection, and nal assembly tasks as required using proper technical orders for mission accomplishment. I performed nondestructive testing, inspection and repair aircraft components using tools such as rivets guns, stresses, drill presses, pneumatic tools, and hoists. I utilized Federal Air Regulations mechanic privileges. I followed maintenance manuals and technical data pertaining to troubleshooting and evaluating F-100-PW-220/229 and F-119 engines, including reading and interpreting aircraft blueprints and drawings to determine serviceability. I ensured proper techniques were used when handling and disposing of hazardous waste. I performed all aspects of corrosion control as well as foreign object control (FOD) in and around work areas. I trained new employees on aircraft components and work safety including accident prevention, FOD prevention, hangar safety, and re protection and procedures. I attended regular work scope meetings with other engine component representatives to ensure minimized downtime by creating effective communication, use of time, equipment and personnel.

Additional duties: I performed troubleshooting along with the extent of repair for major aircraft systems such as landing gear, power plant, gear boxes, pumps, hydraulic, pressurization, utility, fuel, oil, pneumatic and ight control systems. I determined when systems and components were operating properly, whether components or parts needed repair or replacement, and the specic adjustment or alignment required. I disassembled, repaired, and reassembled major aircraft systems, their components and assemblies. I installed, aligned, and conducted functional and operational tests using such tools as wrenches, torque wrenches, speed wrenches, pneumatic wrenches, and ratchet wrenches. I also used precision measuring instruments such as micrometers and gauges. I accomplished maintenance and operational record keeping, both automated and manual, which were performed on appropriate forms denitive sheets, AFTO form 781 series, and Core Automated Maintenance Systems (CAMS) computer terminals as appropriate. I also utilized safety practices and procedures by wearing the appropriate safety equipment, storing, discarding, and proper labeling of hazardous materials in accordance with Federal regulations, thus ensuring a clean work area in accordance with environmental standards.

05/2005 – 03/2010

Y.B. Wheels and Accessories

(New location Unknown)

Oklahoma City, OK

Salary: Per Job Completed

Type: Full time

Position: Fabrication Specialist

I performed fabrication of metallic automobile wheels (usually aluminum) and automobile body parts to t custom wheels. I assembled prefabricated parts to form subassemblies. I read, interpreted and created blueprints of automobile skins. I painted automobile wheels and body parts. I operated various types of measurement equipment such as computers, tire balancing machines, tire gauges, and calipers, and utilized various hand-held and pneumatic tools required for wheel mounting. I performed inspections after nal tasks of myself and other employees.

06/1999 – 01/2002

Seven Eleven Food Stores

2021 N. MacArthur Blvd.

Oklahoma City, OK 73112

Salary: 11.35 USD per hour

Type: Full time

Position: Sales Clerk

Performed weekly inspections on petroleum in petroleum tanks. Handled large amounts of currency on a regular basis. Performed daily inventory on products and all forms of currency. Ensured and assisted numerous vendors with merchandise deliveries. Conducted exceptional customer service skills, interacting with hundreds of customers daily. Responsible for maintaining a clean business at all times.

Education: Includes college coursework and apprenticeship experiences

Aviation Career Center, Oklahoma City, Ok

04/2005 – 10/2007

Aircraft Maintenance Apprentice: In this position I inspected and performed and supervised maintenance and preventative maintenance on various aircraft and aircraft components such as wings, fuselage, rigging, hydraulic units, oxygen systems, fuel systems, electrical systems, gaskets, and seals. I performed rigging work on various aircraft including rotary cables, maintenance on turbo and basic propeller systems like those from McCauley, as well as corrosion control, sheet metal repair, and nonmetallic structural repair such as patches of airframe skins. I also measured the tension of control cables, assembled and installed parts, ttings using layout tools, hand tools, power tools, hydraulic tools, and fasteners like bolts, screws, rivets, and clamps. I performed electrical repair, such as rigging, and battery service, read and interpreted aircraft drawings such as for wiring and troubleshooting purposes, performed turbine and reciprocating engine removal, overhaul, and installations, and maintenance, inspections, preventative maintenance, and troubleshooting of aircraft hydraulic and pneumatic systems including landing gear and position/warning systems.

Metrotechnology Center, Oklahoma City, Ok

01/2006 – 09/2007

Aviation Maintenance Certification

A&P Licensed

Affiliations: Parent-Teacher Association, Putnam City Schools

References: Michael Stewart 334-***-****

Supervisor, Tinker Air Force Base

James Johnson

Family Friend, Business Owner 405-***-****

Dr. Daphne Chandler

Sibling, Professor Temple Univ. 470-***-****

Contact this candidate