CURRICULUM VITAE

LEO L. JARANGDON

One Oasis Condominium B5820 Pres. Magsaysay St. Mabolo Cebu City Philippines

Mobile No. +639*********/+633********

E-mail Address: adg9jd@r.postjobfree.com

Personal Information:

1.Place of Birth: Santo Nino W. Samar Philippines

2.Date of Birth: Jan. 20, 1979

3.Age: 41 years old

4.Civil Status: Married

5.Citizenship: Filipino

6.Height: 5’8”

7.Weight: 72kg

8.Religious Affiliation: Roman Catholic

9.Language Spoken: English, Tagalog and Cebuano, Waray.

Career Objectives:

To combine my knowledge, ability education and my work experiences in a responsible and challenging position with professional organization offering continuous learning and advancement opportunities to ensure the maximum job satisfaction.

Profession: Bachelor of Science in Marine Engineering

Rank: 3rd Marine Engineer

Position Applied for: MAINTENANCE TECHNICIAN

Brief of Employment History:

8 Years’ experience on Sailing Vessel I executing As marine engineer, Perform duties and responsible for carrying out engine room maintenance and Boiler operation, facility’s Process plant, associated equipment and vessel utilities with minimal environmental impact in accordance with Legislation, class, flag and facility management systems.

Familiar with the FPSO Process facility’s Steam plant 60 bar & 16 bar Boiler and machinery their safe operation and maintenance and knowledge of steam turbine Pump.

Safe requirements, including work permit systems, operational and emergency procedures, company policy and instruction.

Carry out Diesel engine maintenance and Valve, Pump overhaul, hydraulic system, compressor repair work, shutdown, isolations and planned maintenance.

Ensure that all information entered in logs, report, maintenance record and Maximo is accurate and conforms to the facility management system.

9 year’s experience OIL & GAS Offshore on FPSO (Floating Production Storage offloading) responsible for the operation / Maintenance of the Boiler, Inert Gas System, Steam Turbine Pump, Compressor, Diesel generator, MGO/LUBE Oil Purifier, R.O. Water treatment, Sewage Treatment plant, Fresh Water Generator, Oily Water Separator, reefer Compressor, accommodation HVAC, and maintenance of engine room equipment and process utility system controlled by the engine room and for the guidance and familiarization of those under my supervision. Assist pre-commissioning and commissioning activities for preservation, functional, load mechanical equipment test, acceptance and start-up commissioning of Oil and Gas plant, FPSO’s Powers, with technical communication and supervisory skills with pro active approach to decision making and organizational ability in a multi-interface/technically demanding environment, knowledge and understanding of PFD and P&ID Drawings if required.

Professional Qualification and Experiences:

Position: Asst. Engine Room supervisor

Duration: Dec. 17, 2015-Jan. 29, 2020

Company: ANGOIL BUMI – FPSO OLEMBENDO

Industry: FPSO-Oil and Gas Petroleum ENI Angola offshore

Location: Angola Africa

Department: Maintenance Dept.

DUTIES:

Repairs Maintained and Operate all Process utility facility.

Delivered all Engine room Mechanical Maintenance service as directed by the Supervisor.

Perform daily Routine Logbook and Report.

Responds to breakdown activities ensuring plant is returned to an operational status as efficiency as possible.

Working alongside my Supervisor and team members, manage work priorities to ensure safety and production are at the forefront of decision-making activities.

Troubleshoot production equipment failures.

Identify and recommending preventative maintenance.

Conduct Engine Tuning and adjustment as well as rebuilding.

Fault finding and testing of Boiler water, cooling, lube oil & fuel system.

Repair Hydraulic pump and steam turbine.

Daily Update Computerized maintenance management system.

Professional Qualification and Experiences:

Position: Asst. maintenance supervisor

Duration: May. 16, 2013- Oct. 15, 2015

Company: SBM – FPSO NGOMA

Industry: FPSO-Oil and Gas Petroleum ENI Angola offshore

Location: Angola Africa

Department: Maintenance Dept.

DUTIES:

Repairs Maintained and Operate all Process utility facility.

Delivered all Engine room Mechanical Maintenance service as directed by the Supervisor.

Perform daily Routine Logbook and Report.

Responds to breakdown activities ensuring plant is returned to an operational status as efficiency as possible.

Working alongside my Supervisor and team members, manage work priorities to ensure safety and production are at the forefront of decision-making activities.

Troubleshoot production equipment failures.

Identify and recommending preventative maintenance.

Conduct Engine Tuning and adjustment as well as rebuilding.

Fault finding and testing of Boiler water, cooling, lube oil & fuel system.

Repair Hydraulic pump and steam turbine.

Daily Update Computerized maintenance management system.

Professional Qualification and Experiences:

Position: 3rd Marine Engineer

Duration: March 20, 2011- Oct.5 2012

Company: MODEC –FPSO PSVM

Industry: FPSO-Oil and Gas Petroleum Bp Angola offshore

Location: Angola Africa

Department: Maintenance Dept.

DUTIES:

Repairs Maintained and Operate all Process utility facility.

Delivered all Engine room Mechanical Maintenance service as directed by the Supervisor.

Perform daily Routine Logbook and Report.

Responds to breakdown activities ensuring plant is returned to an operational status as efficiency as possible.

Working alongside my Supervisor and team members, manage work priorities to ensure safety and production are at the forefront of decision-making activities.

Troubleshoot production equipment failures.

Identify and recommending preventative maintenance.

Conduct Engine Tuning and adjustment as well as rebuilding.

Fault finding and testing of Boiler water, cooling, lube oil & fuel system.

Repair Hydraulic pump and steam turbine.

Daily Update Computerized maintenance management system.

Job description:

Position: 4TH Marine Engineer

Duration: June 03 2010 – Nov. 25, 2010

Company: CTI Mideast Ship management

Industry: Oil & Gas - Tanker [VLCC]

Location: Sailing Vessel

Department: Maintenance Dept.

DUTIES:

Performed the inventory and location of all purifier and compressor spares.

Performed Inventory and location of pumps spares and tools.

Check and maintain running hours and maintenance schedule of his designated machinery.

Check general condition of machinery and special procedure for operation.

Condition and layout of bunkering system including valve operation, tanks and sounding pipe location should be checked.

Condition and layout of sludge and bilge discharge system including valves and pump operation should also be checked.

Thorough sounding of all fuel tanks, bilge and sludge tank should be taken.

Daily consumption of lube oil, fuel oil, marine diesel or gas oil and cylinder oil for daily record keeping in sounding log is to be checked.

Daily production of bilge and sludge on board for record keeping of waste water sounding log.

Record keeping of machinery running hours under his charge.

For carrying out planned maintenance routine under the supervision of chief or second engineer.

Taking daily tank sounding of fuel oil, diesel oil, lube and cylinder oil on board ship and record keeping of the same.

Record keeping of sludge and bilge on board.

Acting as assistant in charge to chief engineer for operation during bunker of fuel, diesel and lube oil.

Completing the month end official papers for his designated machinery.

Compliance of environment policy and MARPOL requirements under the guidance of Chief Engineer.

Maintenance and up keeping of the engine room log book and all those files on board advised by the Chief Engineer

In charge of Purifier, Compressor, and machinery other than main engine, auxiliary engine and boiler, is responsible for.

Conducted Boiler water test and dosed chemical as per manual & operation procedure.

Job description:

Position: 4th Marine Engineer

Duration: Aug. 23, 2009 – January 29, 2011

Company: CTI Mideast Ship management

Industry: Oil & Gas - Tanker [VLCC]

Location: Sailing Vessel

Department: Maintenance Dept.

DUTIES:

Performed the inventory and location of all purifier and compressor spares.

Performed Inventory and location of pumps spares and tools.

Check and maintain running hours and maintenance schedule of his designated machinery.

Check general condition of machinery and special procedure for operation.

Condition and layout of bunkering system including valve operation, tanks and sounding pipe location should be checked.

Condition and layout of sludge and bilge discharge system including valves and pump operation should also be checked.

Thorough sounding of all fuel tanks, bilge and sludge tank should be taken.

Daily consumption of lube oil, fuel oil, marine diesel or gas oil and cylinder oil for daily record keeping in sounding log is to be checked.

Daily production of bilge and sludge on board for record keeping of waste water sounding log.

Record keeping of machinery running hours under his charge.

For carrying out planned maintenance routine under the supervision of chief or second engineer.

Taking daily tank sounding of fuel oil, diesel oil, lube and cylinder oil on board ship and record keeping of the same.

Record keeping of sludge and bilge on board.

Acting as assistant in charge to chief engineer for operation during bunker of fuel, diesel and lube oil.

Completing the month end official papers for his designated machinery.

Compliance of environment policy and MARPOL requirements under the guidance of Chief Engineer.

Maintenance and up keeping of the engine room log book and all those files on board advised by the Chief Engineer

In charge of Purifier, Compressor, and machinery other than main engine, auxiliary engine and boiler, is responsible for.

Conducted Boiler water test and dosed chemical as per manual & operation procedure.

Job description:

Position: 4th Marine Engineer

Duration: April 05, 2008 – Nov. 25, 2008

Company: Sea power Shipping Inc.

Industry: Oil & Gas - Oil Tanker

Location: Sailing Vessel

Department: Maintenance Dept.

DUTIES:

Performed the inventory and location of all purifier and compressor spares.

Performed Inventory and location of pumps spares and tools.

Check and maintain running hours and maintenance schedule of his designated machinery.

Check general condition of machinery and special procedure for operation.

Condition and layout of bunkering system including valve operation, tanks and sounding pipe location should be checked.

Condition and layout of sludge and bilge discharge system including valves and pump operation should also be checked.

Thorough sounding of all fuel tanks, bilge and sludge tank should be taken.

Daily consumption of lube oil, fuel oil, marine diesel or gas oil and cylinder oil for daily record keeping in sounding log is to be checked.

Daily production of bilge and sludge on board for record keeping of waste water sounding log.

Record keeping of machinery running hours under his charge.

For carrying out planned maintenance routine under the supervision of chief or second engineer.

Taking daily tank sounding of fuel oil, diesel oil, lube and cylinder oil on board ship and record keeping of the same.

Record keeping of sludge and bilge on board.

Acting as assistant in charge to chief engineer for operation during bunker of fuel, diesel and lube oil.

Completing the month end official papers for his designated machinery.

Compliance of environment policy and MARPOL requirements under the guidance of Chief Engineer.

Maintenance and up keeping of the engine room log book and all those files on board advised by the Chief Engineer

In charge of Purifier, Compressor, and machinery other than main engine, auxiliary engine and boiler, is responsible for.

Conducted Boiler water test and dosed chemical as per manual & operation procedure.

Job description:

Position: 4th Marine Engineer

Duration: Dec.l 22, 2006 – Dec. 02, 200

Company: SeaGem Maritime International INC.

Industry: Oil & Gas - Oil Tanker

Location: Sailing Vessel

Department: Marine Maintenance Dept.

DUTIES:

Performed the inventory and location of all purifier and compressor spares.

Performed Inventory and location of pumps spares and tools.

Check and maintain running hours and maintenance schedule of his designated machinery.

Check general condition of machinery and special procedure for operation.

Condition and layout of bunkering system including valve operation, tanks and sounding pipe location should be checked.

Condition and layout of sludge and bilge discharge system including valves and pump operation should also be checked.

Thorough sounding of all fuel tanks, bilge and sludge tank should be taken.

Daily consumption of lube oil, fuel oil, marine diesel or gas oil and cylinder oil for daily record keeping in sounding log is to be checked.

Daily production of bilge and sludge on board for record keeping of waste water sounding log.

Record keeping of machinery running hours under his charge.

For carrying out planned maintenance routine under the supervision of chief or second engineer.

Taking daily tank sounding of fuel oil, diesel oil, lube and cylinder oil on board ship and record keeping of the same.

Record keeping of sludge and bilge on board.

Acting as assistant in charge to chief engineer for operation during bunker of fuel, diesel and lube oil.

Completing the month end official papers for his designated machinery.

Compliance of environment policy and MARPOL requirements under the guidance of Chief Engineer.

Maintenance and up keeping of the engine room log book and all those files on board advised by the Chief Engineer

In charge of Purifier, Compressor, and machinery other than main engine, auxiliary engine and boiler, is responsible for.

Conducted Boiler water test and dosed chemical as per manual & operation procedure.

Job description:

Position: WIPER/MOTORMAN

Duration: Jan. 31, 2005 – Sept. 07, 2006

Company: Fair shipping Corporation

Industry: Oil & Gas - LPG Tanker

Location: Sailing Vessel

Department: Marine Maintenance Dept.

DUTIES:

To do watchkeeping duties in engine room or deck.

To monitor and maintain all running engines and machineries.

To assist the engineers during repairs and maintenance of all machineries and equipments.

To maintain the cleanliness of engine room including equipments.

To perform emergency duties in accordance with the vessel's muster list and station bill.

Acquire sufficient knowledge about the legislation in respect of the working environment and safety, and MD safety and environmental policy; and ensure that this is applied in the daily work on board. Particular attention to be paid to the Work Permit system.

responsible for the safe and correct execution of the items in the preventive maintenance programme that are assigned.

Job description:

Position: APPRENTICE MARINE ENGINEER

Duration: Mar. 03, 2000 – Mar. 07, 2001

Company: SULPICIO LINES, INC.

Industry: RO-RO CARGO PASSENGER

Location: Sailing Vessel

Department: Marine Maintenance Dept.

DUTIES:

To do watchkeeping duties in engine room or deck.

To monitor and maintain all running engines and machineries.

To assist the engineers during repairs and maintenance of all machineries and equipments.

To maintain the cleanliness of engine room including equipments.

To perform emergency duties in accordance with the vessel's muster list and station bill.

Acquire sufficient knowledge about the legislation in respect of the working environment and safety, and MD safety and environmental policy; and ensure that this is applied in the daily work on board. Particular attention to be paid to the Work Permit system.

responsible for the safe and correct execution of the items in the preventive maintenance programme that are assigned.

Highest Educational Attainment and Degree Obtained:

Education Level: Marine Engineering

Education Field: Mechanical Engineering

Course: Bachelor of Science in Marine Engineering

University: Southern Luzon Colleges 1996- 2001

Education Level: Secondary School

Santo Nino National High School. Santo Nino W. Samar 1991-1996

Education Level: Elementary School

Santo Nino Elementary Central School. Santo Nino W. Samar 1986-1966

Organizational Affiliation:

MEOA- Marine Engineer’s Officer Association, Philippines;

Special Skills:

Knowledge on Combine Cycle Steam Power Plant, HVAC system, Operation

Knowledge on P&ID/Piping Instrument Diagram

Knowledge on MS office World, Excel and Power Point

Welding

Seminar’s and Training’s Attended w/ Certificate No. /DATE ISSUE

Marine Engineering at the Management Level Cert. no. NMLC-EF1-CEB-180059 June 20,2018

Electrical, Electronic and Control Engineering at the Management Level Cert. no. NMLC-EF2-CEB-160105 Nov. 19, 2016

Maintenance and Repair at the Management Level Cert. no. MLC-E (NC)F3 B06-15-0022 Aug. 22, 2015

Controlling the operation of the ship & Care for Person onboard at the Management Level Cert. no. NMLC-EF4-CEB-150045 Apr. 04, 2015

BOSIET Training Cert.no.00575700290918008 sept. 29, 2018

HYDROGEN SULPHIDE AWARENESS no. 18H2S+-0078-008 Sept. 27, 2018

Offshore Emergency Response Team Member (OPITO Approved) Cert. no. 00644500190806449561 Aug. 19, 2016

Basic Safety Training Cert. no. BST/REF020-05130215PMLPhilippines MAY 11, 2013

Advance Training Fire Fighting Cert. no. ATFF-0713- PROTECT Philippines JULY 26, 2013

Engine Room Simulator Cert. no. Ersc-0308130 NEWSIM Philippines Aug. 15, 2003

Control Engineering System Cert. no. Coen-0308185 NEWSIM Philippines Aug. 23, 2003

Auxiliary Machinery System Cert. no. Auma-0308130 NEWSIM Philippines Aug. 29, 2003

Dangerous Hazardous And harmful cargoes Cert. no. TMTCP Philippines July 07, 2005

Medical Emergency First Aid Cert. no. Sc3t-1457 NMP Philippines Oct. 14, 2004

PSSR/Personal Safety and Social Responsibility Cert. No. pssr-37375-98 NMP Philippines Oct. 17, 1998

Shore base Firefighting Cert. no. su9-796 NMP Philippines Feb. 17, 2004

Ship security officer Cert. no. ISPS-SSO 081*-***-***** Sept. 1, 2016

Consolidated MARPOL 73/78 Cert. no. MP 051*-***-***** May 16, 2014

Specialize Training Oil Tanker Cert. no. STOT-01003080250AM Fareast Philippines March 14, 2008

Specialize Training in Chemical Tank Cert. no. STCT-009-********-PM Mar. 14, 2008

ISM COURSE Cert. no. ism-02009575 Phil. CAMSAT Philippines July 17,2009

General Tanker Familiarization cert. no. su1-885 NMP Philippines Feb. 27,2004

Engine watchkeeping Cert. no. 01169 UC Philippines APRIL 20, 2001

Character References:

Maintenance sup. Allan Green FPSO Maintenance Superintendent ENI Angola

OFFSHORE-ANGOIL BUMI

C/Engr. Amar raj CHANDERAM FPSO PSVM MODEC / Bp Angola Offshore

Engr. RAFAEL JAMOLIN ICSS ENGINEER / ENI ANGOLA OFFSHORE -

ANGOIL BUMI

Certification:

I under signed certify to the best of my knowledge and belief, this curriculum vitae correctly described me, my qualification and my experiences. I understand that my willful missed statement described here in my lead to my disqualification or dismissal if employed.

Signature

Date of Signing:

Contact this candidate