Curriculum vitae

Career Objective: -

Challenging positions with a dynamic organization that will permit me utilize my skill obtained through work experience and education background as well as allows for my Professional growth. PERSONAL INFORMATION:

Full Name : Syed Muhammed Jaffer

Father Name : S. Mohammed Sadiq (Late)

Passport # : AD8529064 Valid up to 8TH Feb 2028

National I.D. Card : 42201-0358906-5

Marital Status : Married

Language Skill : English, Arabic, and Urdu

Permanent Address: House No: A-169, Block-13 Gulistan-e-Jauhar, 9th street Karachi- 75290 Pakistan. Contact Tel-Phone: UAE +971-0566421744 Home: +92-021-********, Mobile: +92-030*-*******, E-mail: adg8kn@r.postjobfree.com ; adg8kn@r.postjobfree.com; adg8kn@r.postjobfree.com Skype ID: smohammedjaffer LinkedIn URL: linkedin.com/in/mohammed-jaffer-syed-97235417 PROFESSIONAL EXPERIENCE:

Senior Instrumentation and Control Engineer with 20+ years of experience in Oil & gas, Combined cycle power Plant, Petrochemical plant erection, pre-commissioning, commissioning, start-up, Operation & Maintenance, upgrades/retrofit project and field services.

Expertise in Gas Turbines/Steam Turbine/HRSGs/Compressors/SWRO/ field instrumentation & different Control systems (DCS, PLC.SLC, F&G, GE Speedtronic MKII, MKV, MKV6, MK6E, BN 3500, GE Fanuc and Siemens Simatic S7F, PDM, SPPA-T3000 Control system).Worked with MNCs, Ministry of electricity & Water Kuwait, ESB International Ireland, General Electric International USA, and Emirate Global Aluminum UAE.

Over the years I have worked Variety of projects all over the Middle-East & Pakistan. Such as MEW Shuaiba south power and Desalination Plant 6 x 134 MW in (Kuwait), 586 MW Uch Power combined cycle power plant (GE Frame 9E gas turbines and C7 Steam turbine) Pakistan. ADGAS Installation and Commissioning (GE Frame-5) in offshore associated gases project Das- Island, Shah Gas Project Abu-Dhabi-UAE, QAFCO V,VI Installation of gas Turbine & Control system MKV6E commissioning Project in Qatar, Engro ENVEN 1.3 extension project of steam turbines & centrifugal compressors, Pakarab Fertilizer Ltd (GE 10/1 DLN), and BHP ZamZama Gas field front End compression project in Pakistan, PPL Sui Compression station revamping of Control system MKII to MKV6e (Pakistan),Steam turbine 25MW commissioning in KE Karachi, remote support from (Jordan) to Iraq in SOC PS2 project for commissioning MKV6e system on Frame-1, Petroleum development of Oman (PDO) Depletion Compression Phase-2 SRDC-2 project.OMV Pakistan Kadanwari Gas Field control upgrade, Fatima Fertilizer & Fauji Fertilizer Ltd, OGDCL Ghotki gas Field Gas Turbine PGT 25 Major Overhaul and start-up, 118MW FPCL new Coal Power Project installation, commissioning and start-up. I-FAT project in ZADCO UAE. Master Gas System Project MGS2 and MGS 3 with Saudi-Aramco, UGP project with Hyundai Korea in Saudi-Arabia.

Currently working with Emirate Global Aluminum Dubai-UAE in First H –class 624 MW Combined cycle Power Plant & SWRO Project.

Experience of working with engineering change control systems to eliminate safety hazards.

Experience of designing, servicing/Maintenance and calibration of various field instruments for pressure, temperature, level, flow measurements, control valves and Control system.

Ability to carry out skilled troubleshooting, repair and preventive maintenance of field instruments and systems, related to steam turbines, gas turbines and compressors.

Ability to work on (CMMS), Maximo, SAP, Smart Plant Dashboard (SPD) and FAP system.

Ability to work on DCS, PLC, SLC, Compressor Control and Firefighting control systems.

Ability to Plan, schedule and supervise CM and PM on control systems and related equipment.

Knowledge of GE products, services, and processes.

Hands on Working experience of GE Frame power turbines/compressor & Boiler control systems.

Hands on working experience of Speedtronic GE MKII, MKV, MKV6, MK6E, BN 3500.GE Fanuc and Siemens Simatic S7F, PDM, SPPA-T3000 control system.

Working experience of Gas metering systems-Gas Chromatograph, flow computers, H2S Analyzer, hydrocarbon dew point analyzer, Dew point, PH & conductivity analyzers.

Understanding of electrical & electronic equipment’s loop schematics, engineering drawings O& M manuals calibration, loop checking, P&ID, Works permit and Log-Out/Tag out (LOTO) procedures.

Strong analytic and problem solving skills together with good interpersonal & organizational skills.

Expertise in E&I design practices for heavy industry, including chemical, power, or Oil & Gas Industry·

Experience with instrumentation, hazardous location wiring practices, panel design, and hardware.

Thorough understanding and efficiency with standard design and drafting practices.

Knowledge of design techniques, tools, and principals involved in production of precision technical plans, O&M Manual, drawings, and models.

Continuously improve personal technical, commercial, and organizational knowledge and skills while mentoring lesser experienced engineers.

Knowledge of commercial processes and budgeting experience.

Ensure conformity with legal rules, ethics and EHS

Ensure own safety and co-worker’s safety.

Occasionally, attend technical conferences, training seminars, etc

Good verbal communication skills and customer focused mindset.

Team player with cross-discipline, and functional leadership knowledge, skills, and experience

Able to work successfully in matrix environment, executing multiple assignments and priorities

Self-starter with energy, positive “Can-Do” attitude.

Deal efficiently with priorities and manage time appropriately.

Continuously looking for innovations and improvements to manage workload and accomplish deliverables across individuals, teams and projects.

Using leadership skills to build and nurture relationships and also creating effective working environments.

Experience to manage multiple teams/Contractors with diverse backgrounds on geographically and culturally diverse such as (Italian/British/Polish/German/Chinese/Philippine/Arab/Turkish/ Korean).

Having sound computer skill in Microsoft office, Windows UNIX, hardware and networking.

Knowledge of HSEC procedures and guidelines.

PROFESSIONAL EMPLOYMENT HISTORY:

I. Employer : Mott MacDonald Ltd Middle East (MME)-UK Base Management, Engineering and development consultancy Company.

Type of Industry: Energy- (UAE First H-Class 624 Combine Cycle Power Plant and SWRO Project) Emirate Global Aluminum EGA-Dubai-UAE. Positions & Period: Engineering Consultant (Control & Instrumentation) Dec 2019 to now. Key Responsibilities/Duties:

Provide Engineering Consultancy Service for Installation and commissioning of Siemens First H-Class Gas Turbine/Steam turbine/HRSG 0f 624 MW Combine cycle power plant and SWRO project in Emirate Global Aluminum Company-Dubai-UAE

Provide professional engineering & technical support to the management team within the Division, helping to ensure high quality service delivery and a coordinated response to clients.

Involve delegated trust and authority, together with the use of initiative, at a level commensurate with the status of the post.

Reviewing, Approving and Coordinating design drawings, calculations and specifications to ensure compliance with project requirements.

Scheduling, planning and executing the project works through EPC & Contractors with accordance to the project timeline & deadlines.

Review all EPC documents and engineering deliverables prepared by EPC Engineer/Licensor and take necessary actions as required.

Review compliance with EPC Engineers/Licensors requirements during design review, safety reviews etc.

Reviewing & Approving of all FQP (Field Quality Plan) for Inspection on all Materials & Installations as per the standard requirements.

Reviewing & Approving the Method statements (MSRA) to issue the PTW

(Permit to work) for executing all works.

Reviewing & Approving FCN (Field Change Note) for any Design change at site during installation of electrical equipment’s.

Preparing & solving the crucial comments through VCRS if anything missed out during review of design drawings & documents.

Coordinating with Design team, engineering team, planning team and Execution team for proper site work activities to improve quality in construction, installation and Commissioning works.

Conducting daily Technical meeting with EPC & Contractors to have discussion on daily work completed status as per the planning schedule & resolving the obstructions/difficulties of contractors to achieve proper quality in project works.

Use of Company e-tool Smart Plant Dashboard (SPD) to retrieve technical Documents.

Participates in Controls Systems factory acceptance tests (FATs) and site acceptance tests (SATs)

Ensure MacDonald HSE policies are at the forefront of all activities.

Adopting an adaptive mindset and using strategic and critical thinking to approach problems in a new way.

Observe site safety procedures & undertake specific projects as required.

Manage multiple teams with diverse backgrounds on geographically and culturally diverse teams.

II- General Electric International (GE Oil & Gas Abu-Dhabi UAE). Position & Period: Field Specialist II (Instrument & Control) 18-01-2010 to 31-7-2019. During my service in GE I have also got the opportunity to perform roles of Site Manager, Material manager, QAQC Engineer, commissioning/Start-up/Residence Engineer, Lead Engineer Control, Field Services technical Adviser E&I, (I-FAT) Engineer and Field Specialist Instrument & Control at different projects in Middle-east. Essential Responsibilities:

Provide on-site technical direction and leadership during installation, startup, commissioning and maintenance to customer owned power generation and industrial facilities.

Maintain strong safety mindset to assure the executed work reflects the technical requirements within GE safety standards.

Power generation includes customer owned utilities, industrial power plants and nuclear power plants utilizing gas and steam turbines, Industrial facilities include refineries, gas plants, Fertilizer plant, terminals, offshore associated gas Plant, oilrigs, plate form petrochemical, paper, and steel industries.

Prepares job-planning documents that define in the scope of outage to be performed through engineering instructions, drawings, and process instructions.

Prepare and organize all aspects of the site mission: analyze specifications, leverage operation experience feedback/lessons learned, and liaise with project manager and methods manager to get the project background.

Proactive in the improvement of the control system and propose solution.

Strong adherence to QMS and other Quality & Process related tools.

Familiarity with long-term parts, services (ITO) and (OTR) contracts management.

Use Company e-tools to retrieve technical Documents.

Working on of GE MKII, MKV, MKV6, MK6E, BN 3500.GE Fanuc & Firefighting control system.

Liaises effectively with Service Manager utilizing customers' CTQ in job planning and execution.

Maintain excellent relations with customers, peers, management and overseas offices.

Always apply GE quality rules on site and ensure conformity with quality procedures and enrich experience feedback.

Coordinate with GE O&M Centre of Excellence (CoE) team, GE Engineering and other O&M support team for the resolution of complex issues relevant to the Site.

Provide leadership and technical direction to skilled worker performing work on customer sites.

Write accurate professional reports acting as single point of contract between customer and GE Oil & Gas headquarter concerning technical issues and interfacing with all involved functions. III. Employer : ESB International (Ireland based company) Type of Industry: 586 MW Combine cycle UCH Power Station, Balochistan, Pakistan. Positions & Period: Sr. Control & Instrumentation Supervisor (21st Sept 1997- 11th Jan 2010). Accountabilities & Responsibilities : Being a competent person I’m responsible for all over the plant field instruments and Control systems, trouble shooting, repair, calibration and fault analysis, preventive maintenance & systems, mainly GE Frame C7 steam turbine, three GE Frame 9E gas turbines With 3 heat recovery steam generators, and DCS (Max 1000 & Max DNA), Turbine control Speedtronics

(MKV), PLC, SLC, data acquisition system, water treatment plant, and gas metering station equipments, health & Safety Equipment, Fire control system, Permit to Work system. Using and updating CMMS to performed work bank for the maintenance. Spare inspection, ordering and maintaining stock in CMMS. Supervise Instrument technicians & contractors. Manage work schedule. Develop annual maintenance budget. Optimize cost to enhance profitability & requirements of manpower/material. Develop and implement maintenance programs on all C&I equipments, including the creation of maintenance philosophy documents.

Direct and carry out modifications to existing control system including testing and commissioning to improve reliability. Maintains records of equipment repairs carried actively participate in HSEC meetings and company initiatives.

IV. Employer : Ministry of Electricity & Water (Kuwait) Type of Industry : 6 x 134 MW Shuaiba South Power & Water Production Station. Position & Period : I & C Asst.Engineer (June 1993 - July 1997). Nature of Work : Maintain, upgrade, and repair Instrumentation & control systems Associated with (6 x 134) MW Toshiba turbines, Babcock boilers, PLC based water treatment And other associated power generation equipments. Carried out the routine, predictive, preventive Maintenance checks on instrumentation and associated systems. Carries out other similar or related Duties as assigned, such as, preparation of maintenance reports, assisting in the development and implementation of modifications to different field Instruments. Supervising contractors on site and manage the work schedule.

Education:

University of Karachi Bachelor Degree 1991 Pakistan Govt.college of Technology (3 years DAE Degree in Instrumentation Technology) 1990 Pakistan Technical Trainings:

MKVIE Control Training from GE Global Services Technical Training Academy Florence, Italy. MKVI Control Training from GE Global Services Technical Training Academy Florence, Italy. Heavy Duty Gas Turbine Control Fundamental Training from GE Global Services Technical Training Academy Florence, Italy.

Two Weeks GE Safety Induction Training course in Doha-Qatar GE on Line Courses Lean & Six Sigma and EHS Certification. Process Instrumentation & Control Course from WAPDA-Pakistan. Gas turbine GE 9E frame and C7 steam turbine onsite Training. Speedtronic (TMR) Mark v turbine control system.

DCS (Max 1000 and Max DNA) system.

Computerized maintenance management system (CMMS) and Maximo. PLC-5 and SLC- 500 maintenance and trouble shooting) Advance PLC Programming Course NED Engineering University, Karachi. Bentley Nevada 3300 & 3500 vibration monitoring system Daniel Gas Chromatograph O & M Training from Emerson Process Management Singapore. Plant Predictive maintenance.

Stag unit operation and balance of plant system.

Nalco Chemical operator training about analyzers.

A+ Certification (Computer Hardware Course).

Competent person training course

ISO 14001-2004 awareness course From Moody International EHS and others Training

Lockout Tag out (LOTO) Authorized simulated Demonstration EHS Overview for Field Service Engineer

Hazardous Waste Awareness

Asbestos Awareness-Refresher

Occupational Noise Exposure Awareness

Basic Firefighting, Portable fire Extinguishers-Refresher. Basic First Aid Course.

Fall Protection Competent Person & Advance Course

Confined Space Awareness-Refresher

Electrical Safety, Risk assessment conducted by Eurolink. Life-saving Rules Rev-2

Customer Site Awareness

Security and Crises Management-Refresher

Hand and Power Tools -Refresher

Sustainability @Mott MacDonald

Business Ethics: Getting It Right

The Safe Way to Work - BMS 0013

Safer Construction - Healthy on site BMS0028.

Personal data protection training (GDPR) (GPEL0930) Information security - BMS0012 & Travel Security BMS0006 Business Management Systems (BMS) overview (IMS0049E)

Contact this candidate