TINA DALTON

**** **** **** ***. #**

Stockton, CA 95210

Phone: 209-***-****

Email: adg4l8@r.postjobfree.com

OBJECTIVE:

I am an efficient, productive, team player, seeking an opportunity within Quality Control where my skills, experience and expertise would benefit the company. My work ethics are exceptional. I’m efficient, reliable and dependable. I enjoy effective problem solving & I continually strive toward improving applicable time/ management requirements. To continue my education in the field of Quality Control. EDUCATION/TRAINING:

Bio-Health College Bio-Technician (Certification)

Strayer University (Business Administration)

Medical Administrative Assistant (Certification)

Silicon Valley Business College

San Jose City College (QA Courses)

14 years of: On Site Training and Certification.

James Lick High School

My Qualifications

I have 15 years of source inspection (internal & external), receiving, in-process & final inspection. I assisted engineering in: research, redlining, writing and updating obsolete procedures and work instructions. 5 years of thermo-silicon & plastic injection molding/medical devices and assemblies. I inspected: live propellant motors, actuators, controllers, prototypes, first articles, sub-assemblies, electro/mechanical assemblies, mainframes, PCB’S, raw loaded, SMT & plated thru holes I interfaced with management, vendors, buyers and customers on a daily basis. Certification:

Certified in: ISO 2000, NDT, IPC-610, Solder, thin-film, coax cables, PCB’s (plated-thru holes & SMT, Die Sheer, Die Attach, Bond Pull, Torque, Clean room: class 100 / 10,000, Wafers (Die’s & Capacitor’s), High Power Microscope, and Calibration.

Background in Electronics:

15 years performing a wide range of precision inspection and operations on mechanically fabricated parts, materials, components, harness assemblies, sheet metal, chassis, electrical wiring, wafers, thin film, sub-straits, special projects/tasks, fiber optics, gold bonding and helix assemblies, internally made or buy out. utilizing: blue prints, procedures, standard/military specifications, schematics, written work instructions, automated equipment, calibrated tools, micrometers, leak detector, calipers, indicators, comparator, protractor, digital/video high power microscope, gauges: depth, plug, pin, angle, ring, height and form, jigs, fixtures, blocks, continuity tester, XRF tester, digital multi-meter, surface plate/table, SMA and CMM probes. I ensured implementation and compliance of all required workmanship standards. I was responsible for generating, up-dating and maintaining QC records and documentation. I obtained & secured discrepant material generating required documentation: (DMR’s, NCR’s, PCN’s, or RTV’s). I maintained a Tina Dalton, 6465 West Lane Apt.# 17 Stockton, CA 95210, PHONE: 209-***-****, low WIP for MRB by immediately notifying engineering and other related parties of the discrepancy and assisting with the processing of the final disposition & corrective action in a timely manner. Knowledge of: ANSI/ASME Y14.5M and Basic GD&T.

PROFESSIONAL EXPERIENCE

VANDERBEND 2019 - 2020

Performed receiving, in-process and final inspection on fabricated and non-fabricated sheet metal. I inspected the Brake set and performed a 1st article inspection on all jobs. I generated C of C’s. Responsible for ensuring all tooling in manufacturing and inspection was calibrated. Luster Cal. 2018 – 2019

Inspection of labels utilizing various tools, measuring equipment, (coherent laser), and jigs. My duties were receiving, in-process and final inspection. I examined the quality of work- manship for conformity to applicable industry standards and customer requirements. Applied Aerospace Systems 2017 - 2018

I was responsible for receiving, in process, and final inspection. Inspection of core for the Boeing 747. Sub-assemblies and complete assemblies for the Hubble, using predetermined methods, operations, and setup and prescribed specifications. Inspected visually: hardware, in processed and completed products such electronic units, sub systems, precision electro mechanical assembly units Inspection for structural flaws, and internal defects. Using Mil specs, customer specifications, drawings, inspection instructions, check list and verbal instructions. Utilizing various measuring devices. Accept/reject criteria for rework of defective or malfunctioning units, systems and hardware. Worked with Manufacturing Engineering and Technicians throughout the manufacturing process to ensure production of quality products. I was commended for helping to achieve a low WIP for receiving inspection, which had not been accomplished in years.

Sensity Systems 2016 - 2017

I was responsible for receiving, in process, and final inspection of all piece parts and assembly builds. I inspected prototypes and first builds. I was given the responsibility of creating several SOP’s and assisted in the updating of out dated/obsolete SOP’s. I created and generated product work and rework instructions for the quality department and production department. I created first article procedures, flow charts and templates. Utilizing a high-power microscope, I inspected all SMT PCBA’s. Perform 100% & AQL level inspection process. I was solely responsible for all documenting, rearranging and storage of MRB materials. I was given the responsibility of ordering all quality control tools for the department. I generated folders/files consisting of all required drawings, in-order to efficiently train co-worker to perform in-process and final inspection on the production line. I inspected all mechanical/electrical assemblies. Optimum (Livermore CA) Quality Control Technician / Inspector 2014 – 2015 Inspection of prototypes, aerospace avionics, Scan Glider, and Medical devices. Ensuring Compliance of ASME and MIL specifications. Perform receiving, in process and final inspection of all assemblies and piece parts. Perform 100% & AQL level inspection process. Perform & document all 1st article inspections, & maintain devices history records. Inspection of PCB’s utilizing IPC-610, AOI, automated x-ray, automated optical and SMT equipment. Perform OBA’s prior to shipping. Generated Certifications for customers. Involved in the MRB process and RMA process, generating NCR’S & DMR’S. Perform routine shop floor inspections.

Optimedica / Abbott (Sunnyvale CA) Quality Control Technician 2012 – 2013 Tina Dalton, 6465 West Lane Apt.# 17 Stockton, CA 95210, PHONE: 209-***-****, Inspection of medical systems for cataract removal. Inspection of mechanical parts, laser assemblies and sub-assemblies utilizing the MicroVu. Responsible for inspection testing and processing of all PCB’s utilizing IPC-610. Testing of mechanical, electrical assemblies and systems. Perform first article, in-process and final inspection. Testing of implemented software on systems. Responsible for daily audit of all incoming materials. Perform weekly and monthly on line production audits. Responsible for the processing and handling of all MRB material and NCR’s. Review DHR’s of completed systems. Pacific Plastics & Engineering (Capitola, CA) Quality Control Inspector 2011 - 2012 Inspection of medical plastic injected molded/silicone parts using CMM, Micro-Vu, Gages, Calipers, Micrometers, etc. Involved in the MRB process. Performed daily audits to ensure production of a quality product. Receiving, In process and Final Inspection. Generated Certifications for customers. Cleanroom. Maintain history records. Perform OBA's prior to shipping. Infineon (Morgan Hill, CA) Senior Quality Control Inspector 2007-2009 Lead inspector, inspected die attach assemblies, wafers, integrated circuits, & transistors. Trained and directed co-workers on graveyard shift in receiving, in-process and final inspection. Conducted daily audits on the production line to assure conformance to regulatory commitments. I performed internal procedures, operations & documentation I had the responsibility of calculating required time to accomplish/exceed target goals. Generated daily/monthly reports for management quality control & production supervisor. Senior Quality Control Inspector CTS, Santa Clara, CA 2006-2007 I was responsible for the final inspection on PCB’s, (SMT, and Thru Holes), mainframes and sub- assemblies. I performed receiving inspection on prototypes, first articles, platform-based engineered

/electronic components, modules, auto products, ceramic components, crystals, voltage oscillators, medical devices and piece parts. I performed pre-company audits to ensure compliance for true audit. I assisted in rewriting the company's receiving inspection procedures. Collimated Holes, Campbell, CA Fiber Optic /Technician 2002-2005 I interfaced with Engineering on a daily basis. I completed special projects, worked with prototypes & revised assemblies. Assembled and built micro capillary arrays & drawn etched hole structures for medical scientific and industrial applications. I inspected and built 1st, 2nd, and 3rd optical assemblies. I implemented innovated solutions in the process area, preventing injury to employees and increasing production. I designed a system for tracking and storing fiber. Senior Electro/Mechanical Inspector JDS Uniphase, Santa Clara, CA 2000-2001 Utilizing a high-power microscope, I performed inspection on: submarine and standard laser diodes, In-process and final inspection of surface mount PCB’s and sub-assemblies. Certification for: Die Attach, Die Sheer, Bond Pull, automated visual inspection system, clean room Class 100 & 10,000 & data entry, I assisted engineering in redlining, revising & removing obsolete procedures and drawings from quality control & production.

Senior Electro/Mechanical Inspector SanDisk, Mountain View, CA 1999-2001 Lead inspector, responsible for training inspectors in the following areas: source, receiving, in-process and final Inspection. I inspected MMC sub-straits, wafers, PCB’s, and IC’s. I collected required data in-order to generate monthly status reports for management, vendors and customers. I maintained the update of quality control documentation. I assisted in the control and traceability of discrepant material pending MRB disposition with corrective action.

Tina Dalton, 6465 West Lane Apt.# 17 Stockton, CA 95210, PHONE: 209-***-****,