OBJECTIVES

Seeking for employment with a full-time job in a multinational firm which suited my position as Piping Designer wherein my engineering skills are capable to serve and excel for the success of the project and organization.

EDUCATION

INTERMEDIATE SCHOOL. Graduated on March 2005 from Rizal High School, Pasig City Metro Manila

COLLEGIATE EDUCATION. Bachelor of Science in Mechanical Engineering at Technological Institute of the Philippines, Quezon City – Graduated on May 2010.

AREAS OF EXPERIENCE

Piping Engineer (September 30, 2019 – Present)

1.Project : Upgrading of Dagat-Dagatan Sewage Treatment Plant to CAMANA Water Reclamation Facility

Company : JFE Engineering – Philippine Branch

•Create piping system’s blueprints based on layout plan.

•Provide standard design practice related to piping activities to the contractor prior to the project execution.

•Incorporate the piping design and layout to 3D modelling using AutoCAD Plant 3D prior for the model review by the client.

•Modify piping system prior to alignment with other disciplines (Civil, Electrical, etc.) and to have coordination between them.

•Performs piping material estimation during BOM extraction in isometric drawing.

•Performs head loss calculation of all pumps for efficient and reliable flow rate prior to procurement.

•Respond to comments from client and expedite immediately prior to weekly progress report.

•Propose cost-effective solution to management for better cost estimation of the whole projects.

•Supervise piping installation works by interpreting to the workers and implement the international engineering codes and standards.

Piping Designer / Engineer (September 12, 2018 – September 12, 2019)

2.Project : Harmony Thailand / Client : Kuraray Co. Ltd

Company : JGC Corporation

•Prepares Line Index; Tie-in list; Piping layout; Piping information; Loading calculation; steam trace layout; MTO sketch; BM/BQ; Plan and Isometric drawing in compliance with project standards; specification; contract requirements; and accepted engineering and construction practices.

•Selects line which requires stress/vibration sketch following the criteria set for analysis and evaluation; prepares mechanical data; performs calculation for initial displacement with assistance of superior.

•Assist in developing model for stress/vibration analysis; interprets and evaluates the result; and recommends method of resolution to comply with applicable vendor’s allowable or code requirements.

•Performs highly specialized 3D CAD application using SmartPlant 3D (SP3D) for modelling of equipment; structural and piping system; interference detection; annotation; model review; and plan drawing extraction according to project 3D modelling procedure.

3.Project : PKI-Tertiary Amine 3 (TA3) / Client : Philippines Kao Inc

Company : JGC Corporation

•Performs Piping Material Take-off (MTO) list of reports/sketch for assigned area and prepares piping layout prior prior for submission of project requirements.

•Prepares Loading data calculation prior for submission to Structural/Civil on their project deliverables.

•Assigned and prepares arrangement of standard pipe supports in accordance to stress design requirements.

•Provide and prepares piping isometric drawing using CAD software such as AutoPlant 3D.

•Responsible for the execution of model review comments by the clients during project meeting.

Design Engineer (Mechanical/Piping) (April 2, 2018 – September 7, 2018)

1.Project: 5 MLD UP Sewage Treatment Plant Upgrade / Diliman, Quezon City Philippines

Company: VA Tech Wabag Philippines Inc.

•Responsible for validation of vendor’s equipment which should be complied to the client standard.

•Assigned as engineering design coordinator for checking and implementing the design practice with compliance to required project specification.

•Ensure the material requested meets the standard requirement, approved budget and project specification prior for final procurement.

•Assigned for site inspection and assessment of project activities during construction.

•Arrange piping layout in such a manner that shall be economical on costing and quantities of materials, accessible through maintenance and operable for all the valves and instrument.

•Responsible for mechanical design submittals which includes General Arrangement Drawings, Piping & Instrument Diagram (P&ID), Mechanical Datasheet for all equipment and other required deliverables by the client.

Piping Designer III (May 4, 2015 – August 31, 2017)

1. Project: Refrigerated Gaseous Tank Facility (RGTF) / Johor, Malaysia

Company: Chiyoda Philippines Corporation

•Ensure the quality checking of all deliverables which includes isometric drawing, final 3D model review, General Arrangement (GA) drawing, detailed Plot Plan, Vendor Equipment drawing and data sheet.

•Responsible for approval or sign-off of all drawing deliverables prior for submission to client in coordination from other design group.

•Perform piping loading data calculation prior to standard arrangement of structural pipe rack

•Assigned applicable standard support in accordance to stress design requirements.

•Execute and implement international standards such as ASME B31.3 with compliance to client or project specification.

2. Project: Freeport Liquefied Natural Gas / Houston Texas, USA

Company: Chiyoda Philippines Corporation

•Execute piping design works as per Piping Project Execution Plan.

•Directly supervise the input in Piping Design System (PDS) & monitoring of Hold Items list for follow-up information to Area Lead.

•Provide pipe routing design, nozzle arrangement and structural platform/stages information, pipe support lugs on equipment, electrical tracing information and other miscellaneous requirements.

•Check, review and comment on 3D design and on isometric drawings in accordance with project specification.

•Responsible for pipe clash checking prior to preparation of 30%, 60% & 90% model review comments.

•Preparation and checking of detail plot plan prior to IFC issuance.

•Preparation and consistency checking on tie-in package deliverables.

•Perform manual Material Take-Off (MTO) for valves and other components. Consistency check the generated MTO from PDS 3D model against the input in B1/B2 Material Data Sheet.

Piping Designer II (Nov. 11, 2013 – Apr. 30, 2015)

1.Project: Shell Tabangao Asset Renewal Tabangao Refinery Euro-IV Compliance (STAR-TREC) / Batangas, Philippines

Company: Chiyoda Philippines Corporation

•Review the 3D model from Navisworks by consistency checking based on the latest revision of Process Engineering Flow Scheme (PEFS) or the P&ID.

•Responsible for 3D Piping Model Clash Checking using Navisworks Simulate and have a weekly reporting to Project Engineer regarding the progress.

•Preparation of Material Take-Off (MTO) based on the actual quantity in Isometric Drawing and review the Final MTO control list prior to delivery and purchase of materials to the construction site.

•Responsible for piping layout/routing of small bore sizes such as utility and auxillary lines based on the updated P&ID.

2.Project: Papua New Guinea Liquefied Natural Gas (PNG-LNG) As-Built / Port Moresby, Papua New Guinea

Company: Chiyoda Philippines Corporation

•Assigned on consistency checking of isometric drawing from PDS 3D model based on the latest revision and updated PDS model file.

•Responsible for controlling the document list for the revision of General Arrangement (GA) drawings & SPS (Special Pipe Support) drawings.

•Expedite the revision of Special Pipe Support (SPS) based on the Field Design Change from the construction site.

•Update the 3D model in PDS software based on the latest revision prior to Field Design Change from construction site.

Piping Designer I (June 13, 2011 – Nov. 08, 2013)

1.Project: Tokuyama Malaysia Polysilicon (TMP- Train 1&2) / Sarawak, Malaysia

Company: Chiyoda Philippines Corporation

•Responsible for 3D modelling operation of piping, equipment, pipe support & structures.

•Checking the Isometric drawing for incorrect pipe support, inconsistency from 3D model as per project standard and specification.

•Draft the piping layout drawing as per standard practice and project specification with an excellent quality deliverables.

•Participates in model review with clients prior for close-out comments with different disciplines

•Coordination with other disciplines (Instrument, Civil, Electrical, Mechanical & Process) related to clarification of data information which includes P&ID, Test Block Diagram, Stress Analysis, Vendor Equipment Data, Control Valve data specification, Level Gauge Data Sheet and other information drawing.

2.Project: Papua New Guinea – Liquefied Natural Gas (PNG-LNG) / Port Moresby, Papua New Guinea

Company: Chiyoda Philippines Corporation

•Prepares 3D model customization request for unavailable piping material components.

•Troubleshoot the encountered error in isometric drawing with coordination to 3D admin group.

•Trained as a PDS Operator for 3D modelling of piping, equipment, pipe support & structures as per marked-up drawing by the designer.

•Performs 2D drafting using Microstation for General Arrangement (GA) Drawings & AutoCAD for Special Pipe Support (SPS) Drawings.

SEMINARS AND TRAININGS

“Level 1 & 2 - Piping Design Engineering Training Program”, Jan. 12, 2015 – June 26, 2015 held at Chiyoda Philippines Corporation.

“SmartPlant 3D Training Course”, Feb. 2, 2015 – Feb. 20, 2015 held at Chiyoda Philippines Corporation.

“PDMS 3D Modelling”, Nov. 11, 2013 – Dec. 18, 2013 held at Chiyoda Philippines Corporation

“Piping Engineering Fundamentals”, Sep. 9, 2013 – Oct. 26, 2013 held at Chiyoda Philippines Corporation

“Isometric to Plan Drawing Conversion”, Aug. 5, 2013 – Aug 30, 2013 held at Chiyoda Philippines Corporation

“SPS (Special Pipe Support) and GA (General Arrangement) Drawings using Microstation”, June 13-24, 2011 held at Chiyoda Philippines Corporation

“3D Modelling of Static/Rotating Equipment and Piping Design using PDS”, June 27 - July 29, 2011 held at Chiyoda Philippines Corporation.

“Flexibility and Stress Analysis using AutoPIPE”, August 1 – September 5, 2011 held at Chiyoda Philippines Corporation

“AutoCAD 2010 Full Course with Color rendering”, August 4 – September 6, 2010 at Microcadd Technologies,Inc – Cubao Branch

“AI and Robotics Primer: Concepts of Robot Construction, Line, Light, Sound Following, Shape and Color Recognition”, 30 September 2008 at Technological Institute of the Philippines-QC.

“Robotics Seminar”, 27 March 2008 at Tandang Sora Hall Women’s Center, Taguig City.

“Computer-Aided Cost Estimating for Building Construction”, 17-18th of March 2018 at Crescent Technologies, Manila Philippines.

ACHIEVEMENTS / HONORS

Registered Mechanical Engineer by the Professional Regulatory Commission, Manila Philippines (March 2011)

SKILLS AND INTERESTS

Able to interpret Isometric drawing and Plan drawing for the detail design of Piping Engineering deliverables.

Proficient in interpretation and understanding the Piping & Instrument Diagram (P&ID)

Knowledgeable in ASME B31.1 / B31.3 Principles and other engineering codes and standard.

Proficient in using engineering software such as AutoCAD, AutoPIPE, Microstation, Spoolgen, PDS, PDMS & SP3D, AutoPlant 3D, Cadworx and other related softwares.

HARRY TAYACTAC

TECHNOLOGICAL

INSTITUTE OF THE

PHILIPPINES

Quezon City

Class 2010

881 Labanos St. Napico Manggahan Pasig City PH

+639********* / +639*********

adg3fa@r.postjobfree.com

Skype ID : engr.tayactac

Contact this candidate