Unrestricted

SHIVANSHU PANDEY

H.NO A*-***, Sector 83-A,Gurugram, Haryana, India-122004 • +91-858******* mailto:adg2fc@r.postjobfree.com•linkedin.com/in/shivanshu-pandey-a8272b3b Education:

Rajasthan Technical University, University College of Engineering, Kota, India 2006-2010 Bachelor of Technology

Major: Mechanical Engineering. (67.3%)

Summer industrial training from “Bhabha Atomic Research Center”, Mumbai, India. Experience Summary:

7.5 years extensive experience of piping stress analysis in Oil & Gas and in Power Plant.

Piping Stress Analysis of lines connected to equipment such as centrifugal pumps, Boilers, reciprocating compressors, air cooled heat exchangers, pressure vessels and heat exchangers, columns, fired heaters, reactors using CAESAR II and ROHR 2.

Coordination with vendor, client and with other disciplines to successfully deliver the project in accordance with project specification.

Preparation of open point list and follow up the list on regular interval with client and vendor for smooth flow of project and timely delivery of output.

Competent in understanding the P&ID (Piping and instrumentation diagram), PFD (process flow diagram), and equipment drawings.

Review customer/vendor comments and coordination.

Preparation of final documentation (Piping stress report) for transmittal to customer.

Critical water system analysis (cooling water system, called PAB system in power plant) using CAESARII.

Underground piping analysis using Caesar II.

Gas turbine skid internal piping analysis and nozzle qualification.

Steam turbine, and HRSG connected system analysis.

Floating power plant main steam (low pressure and high-pressure steam), Steam drain, condensate, feed water, cooling water, etc. system analysis using Caesar II.

Compressor (single shaft) piping analysis and compressor nozzle qualification as per NEMA SM23.

Gear compressor stress analysis in accordance with B31.3, using ROHR2 software.

Qualification of nozzle as per WRC107 / WRC297.

Flange Leakage test as per pressure equivalent method or as per ASME VIII Div. 1.

Support selection and optimization of critical supports i.e. Spring hanger, expansion joint, strut etc.

Preparation of critical line list as per stress design basis.

Issue piping loads to civil for pipe rack and platform loading.

Conversant with wide ranging international codes like ASME B31.3, ASME B31.1, ASME B16.5, /16,47, ASME B16.5, ASME B16.47, API 610, API 617 etc.

1.5 years of experience in supply and distribution department in refinery.

Responsible for dispatch operation (loading and unloading) of white oil (MS, HSD, and SKO), and black oil (bitumen) through road and rail at refinery end.

Handling manpower for loading and unloading of oil as per standard operating procedure, and with safety guidelines.

Unrestricted

Coordinating with sales team and other department for timely supplies to customer.

Coordinating with maintenance and instrument department for any type of maintenance activities.

Carrying out all type of sampling of oil products, monitoring pump operations, routine field activities, and maintain daily records of dispatched products.

Work Experience:

Siemens Ltd. (Power & Gas), Gurgaon, India 09/15-Presently Working Project Executed:

Burullus, Egypt (4800MW Combined Cycle Project)

LordsTown, USA (900MW Combined Cycle Project)

Sabalan Methanol Project (Single shaft compressor skid, Oil & Gas)

Siraf Methanol Project (Single shaft compressor skid, Oil & Gas)

Temirtau (Gear compressor skid-Main air compressor)

Zhoushan (Gear compressor skid-Main air compressor, and boost air compressor)

Estrella del Mar III, Dominican Republic (Floating power plant 450MW) Job Role:

In-depth contract reading at the starting of the project and comment and doubt clarification with customer through meeting.

Perform stress analysis of highly critical systems like: o high pressure steam line, analysis of turbine, and HRSG connected systems, i.e. MAL (turbine drain system), LBH (HRSG drain line systems), MAW etc. accordance with ASME B31.1 using Caesar II software.

o Underground piping system analysis.

o Gas turbine internal piping stress analysis (fuel gas, pilot gas, blow off lines etc.). o cooling water system stress analysis of power plant. o Floating power plant main steam (low pressure and high-pressure steam), Steam drain, condensate, feed water, cooling water, etc. system analysis.

o BOP compressor (single shaft) piping analysis and nozzle qualification of compressor nozzle as per NEMA SM23.

o Gear compressor (both main air compressor, and boost air compressor) stress analysis, compressor nozzle, and intercooler nozzle qualifications in accordance with B31.3 using ROHR2 software.

Selection of hanger, strut, snubber, expansion joints and other critical supports, and maintain their datasheet.

Coordination with vendor, client and with other disciplines.

Review client and vendor comments and coordination.

Provide civil loads for civil structure design.

Preparation of piping stress report for client submission. GS E&C Delhi Pvt. Ltd. (Oil & Gas), Gurugram, India 04/14-09/15 Project Executed:

Socar-Turcas Aegean Refinery (STAR), Turkey

Job Role:

Unrestricted

Performed Pipe Stress analysis of Critical Piping system, connected to column, air cooler, tank, heater, pump, heat exchanger, etc. and qualification of the equipment in accordance with ASME B31.3 Code Requirements, using Caesar II software program.

Making of critical line list of stress analyzed system according to their criticality.

In the starting of project perform stress analysis of large bore pipes (>12”) to decide anchor bay and provide the axial load on the anchor bay to civil.

Jacketed piping system stress analysis.

Design and selection and optimization of pipe supports, and springs Supports.

Performed WRC297 / WRC107 for nozzle flexibility and nozzle load qualification respectively.

Coordinating with other department, client, and equipment vendor. Reliance Industries Ltd. (Oil & Gas), Jamnagar, India 03/12-04/14 Project Executed:

Gasoline Depentanizer Project, Jamnagar

J-3 Project, Jamnagar

Job Role:

Performed piping stress analysis in accordance to ASME codes.

Nozzle load qualification against the load given by equipment vendor.

Pipe rack and Structures loading input to civil for structural design.

Making critical line list as per stress design basis.

2 months construction experience at petrochemical plant site, Dahej, Gujarat, India Essar Oil Ltd. (Oil & Gas), Jamnagar, India 09/10-03/12 Project Executed:

Essar Refinery Expansion, Jamnagar.

Job Role:

Responsible for dispatch operation (loading and unloading) of white oil (MS, HSD, and SKO), and black oil (bitumen) through road and rail at refinery end.

Handling manpower for loading and unloading of oil as per standard operating procedure, and with safety guidelines.

Coordinating with sales team and other department for timely supplies to customer.

Coordinating with maintenance and instrument department for any type of maintenance activities.

Carrying out all type of sampling of oil products, monitoring pump operations, routine field activities, and maintain daily records of dispatched products.

Unrestricted

SOFTWARE COMPETENCIES

CAESAR II – INTERGRAPH

ROHR2

NAVISWORKS

MS Office

MS Excel

CERTIFICATION AND COMMUNITY INVOLVEMENT

Get selected in National Child Science Congress-2000 at state level.

Cultural coordinator in college annual function “Anukriti”

Contact this candidate