Summary: Civil/Structural Design Engineer with ** years of experience in FEED, detailed engineering,

fabrication & construction phases of project in refinery, petrochemical, polysilicon, LNG and steel plant.

Have hands-on experience in detailed analysis, design & detailing of structures such as steel process structures and modules, connection design, concrete stair case, pile and concrete foundation, concrete building (reactor structure with gantry), checking of design calculation and drawings, MTO preparation for steel and concrete, review of vendor drawing & calculation, fabrication support at fabrication yard, construction support at site. Have handled various responsibilities on project including engineering supervision, quality assurance, discipline audit support, model review support, and coordination with other engineering disciplines, offices and clients.

Have experience of analysis, design and detailing of Pre-Cast concrete structures. This includes design of concrete beam, column, socket, splices, corbel, and insert plates for interface between steel and concrete. Also have experience of detailed dynamic analysis and design of block/table top foundation for vibratory machines. Performed dynamic analysis of modular steel structures supporting vibrating machines.

Have experience in designing of steel structure to concrete structure interface. This includes design of Anchor Bolts, Shear Keys, Elastomeric Bearing, Pot Bearings etc. Also have experience in designing underground concrete pits which includes design of sheet pile to improve stability. Have hands-on experience on combined lifting analysis of modular structures (1200 MT to 1600 MT) using Floating Crane (multiple hook), Rigger Crane (single hook) and Gantry for de stacking and restacking operation. Also have knowledge on international Lifting, Rigging standards (DNV- OS-H205) for analysis and design purpose.

Have experience and exposure to multiple onshore modular projects located on Sakhalin Island & Tengiz, Kazakhstan for clients like Exxon & Chevron. Modules weight varied from 400 MT to 4000 MT. Modules included enclosed and open process buildings and open pipe rack structure supported on pile foundation. Modules were analysed for extreme temperature condition, ocean/canal (ship/barge) transportation condition, road (PMT/SPMT) transportation condition, lifting and weighing condition. Held responsible for weight reporting, foundation load report, material take-off etc.

Codes and Standards worked with include American (AISC/ACI/ASCE), Indian (IS), Russian, RoK and Australian etc.

Software Proficiency: STAAD.Pro, STAAD Offshore, SAP2000, DYNA, RISA 3D, MS Office, MathCAD, SPR, Navisworks etc.

I have been to DSME fabrication yard in South Korea for module fabrication support on TCO FGP project. Also assigned to Fluor Philippines office for half a year for working on a LNG Saikat Chatterjee

Civil/Structural Engineer

Email: adfy0z@r.postjobfree.com/Cell: +91-997*******

project in Australia. I have been on business trip to Fluor, United Kingdom for technical meetings with client and vendors.

Career Summary:

FLUOR

CORPORATION

DSME fabrication yard,

Engineering Support –

Work From Home

March 2020 – June 2020 3 months

DSME fabrication yard,

South Korea

October 2018- March 2020 1 yr.

Manila, Philippines January 2012 – July 2012 yrs. New Delhi, India October 2008 – December 2011

July 2012 – September 2018

9 yrs.

M.N. Dastur &

Company Pvt. Ltd.

Kolkata, India July 2007 – September 2008 1 yr.

PROJECT EXPERIENCES

PROJECT – FUTURE GROWTH PROJECT, TENGIZ, REPUBLIC OF KAZAKHSTAN (FEED and EPCM, Onshore Modularization)

CLIENT – TENGIZCHEVROIL, LLP (TCO), REPUBLIC OF KAZAKHSTAN (Joint Venture of Chevron, Exxon Mobil, KGNT and KING)

OCTOBER 2018-June 2020 (on overseas assignment to DSME fabrication yard, Okpo, South Korea) - Currently working as Structural Engineer to provide fabrication engineering support at DSME fabrication yard. Responsibilities includes:

1. Performing structural integrity and trailer layout verification for SPMT movement of modules at fabrication yard. 2. Verification of structural integrity through combined lift analysis of PAU's using Floating crane or Rigger crane. 3. Respond to Site Fabrication Queries and Field Change Notices related to Module Steel fabricator. 4. Providing engineering solution/support/resolutions for issues arising due to fabrication demerits/errors and from post AFC changes.

5. Site visit for resolving issues on constructability. APRIL 2014 - SEPTEMBER 2018 (Fluor New Delhi, India Office) - Worked as Area Lead Engineer during Detailed Engineering phase of TCO Project and responsibilities includes: 1. Module to Concrete Pedestal interface design under extreme temperature conditions. Performed Design and Interaction with vendor for using Elastomeric Bearings and Pot Bearings at the steel to concrete interface to release large thermal forces.

2. Analysing modules for different conditions such as Sea Transportation, Land Transportation, Lifting, Weighing, and Onsite. Checking detail drawings and design calculations. 3. Analysing stick built structures and their foundations, dynamic analysis of machine foundations, underground concrete pits, pile foundation design of large modules, equipment foundation design (vessels and exchangers). 4. Providing technical support to team to ensure smooth execution of work, maintaining progress and productivity, weight and MQMS reporting.

JULY 2012 - MARCH 2014 (Fluor New Delhi, India Office) - Worked as Design Engineer during FEED and involved in following activities: 1. Preparation of MTO and FEED design reports supporting concrete and steel quantities. 2. Performed studies to arrive module foundation layout concept to optimize pile numbers. 3. Preparation of project specifications and design guidelines which are to be used in detailed engineering phase. 4. Performed studies to finalise module boundary condition. Also involved in various studies took place to finalise options regarding module layout, transportation philosophy, steel and concrete quantity optimization. PROJECT – GLADSTONE LNG, QUEENSLAND, AUSTRALIA (LNG Project, EPCM phase) CLIENT – SANTOS LTD., AUSTRALIA

JANUARY 2012 TO JULY 2012 (on overseas assignment to Fluor Philippines office) Worked as Design Engineer. Responsibilities includes: 1. Analysis and Design of steel pipe racks supported through Screw Piles. 2. Analysis and design of Compressor Shelters and Equipment operating platforms. 3. Foundation design of vendor supplied steel buildings. 4. All the works are based on Australian and American codes/standards. PROJECT – JETTY BOIL-OFF GAS PROJECT (JBOG), QATAR, KINGDOM OF SAUDI ARBIA CLIENT – QATAR GAS COMPANY LTD., QATAR, KINGDOM OF SAUDI ARABIA NOVEMBER 2010 – DECEMBER 2011

Worked as Design Engineer for Design of Precast Piperack in Central Compression Area of the plant and involved in following activities:

1. Analysis and Design of Concrete Precast pipe rack which include design of concrete superstructure as well as pile cap, socket and structural steel at and above deck level. 2. Design of concrete superstructure involves design of concrete beam, column, corbel, inserts etc. 3. Lifting analysis of concrete piperack bents.

4. Worked as engineering checker for checking of Underground Civil and Electrical Trenches, Paving, Retaining Wall etc in Central Compression Area and misc platforms (Berth Manifold Platforms with heavy upset loading), Pipe Bridge in OSBL area.

5. Involved in checking of pile calculation of Central Compression and OSBL area. Codes and Standards: Above Related American (ASCE / ACI / ASD) codes, Fluor FD Guidelines SOFTWARE PACKAGES: RISA-3D, L-Pile, PCA Col.

PROJECT – LANCO 1500 TPA POLYSILICON PLANT

CLIENT – LANCO SOLAR PRIVATE LIMITED

MARCH 2010 – OCTOBER 2010

Fluor scope comprises detailed engineering and technical support for procurement, as well as field engineering for the plant that is to manufacture 99.9999999% pure polysilicon. 1. Involved in project start up activities and prepared Structural Design Criteria and Civil Design Criteria for the project.

2. Performed the boundary wall design for the polysilicon plant. Performed analysis and design of Chemical Vapour Deposition (CVD) reactor building and product handling building. These are concrete buildings. Design of these buildings includes design of beam, column, slab, stair case, shear wall for lift shaft etc. 3. Performed design and detailing of Gantry Girder, fixing of blast resisting panel, reviewing vendor drawing and other activities.

4. Assigned to site for three months to provide technical assistance to construction. PROJECT – SAKHALIN 1, CHAYVO OPF EXPANSION PROJECT, SAKHALIN ISLAND, RUSSIA

(Modular project, EPCM phase)

CLIENT: EXXON NEFTEGAS LTD. – A SUBSIDIARY OF EXXON MOBIL, RUSSIA NOVEMBER 2009 – FEBRURY 2010

Worked as design engineer and involve in following activities: 1. Land transportation analysis for the modules (SPMT) 2. Ocean transportation analysis for the modules (barge) 3. Regular weight reporting of modules.

4. Performed dynamic analysis of module supporting multiple pump at the base level. PROJECT – OJSC TANECO NIZHNEKAMSK REFINERY AND PETROCHEMICAL COMPLEX PROJECT CLIENT – TANECO, NIZHNEKAMSK, REPUBLIC OF TARTARSTAN, RUSSIA OCTOBER 2008 – OCTOBER 2009

Worked as Design Engineer in SRU area and involved in following activities: 1. Analysis and Design of steel Piperacks and Cabletray racks, process structures and shelters. This include both superstructure and foundation design

2. Analysis and design of precast concrete pipe rack. This includes design of concrete superstructure, socket, foundation, column splice, corbel etc.

3. Design of underground concrete pit.

4. Design of foundations for Vertical Vessel/Columns, Horizontal Vessel/Exchanger, Blower, and Incineration Package.

Engineer-Structural Vizag Steel Plant

M.N Dastur & Co. Pvt. Ltd. VSP-6.3MTPA Expansion Project 07/2007 - 09/2008 KOLKATA, India

Steel Plant Project (Raw Material Handling). Responsibilities are mentioned below: 1. Preparation of design calculations. Checking of drawings. Review of Vendor Drawings. Interacting with other disciplines.

2. I have designed foundations for Material Handling Structures (Crusher House Steel Building, Take-up Tower, Transfer Tower, Counter Weight Tower, Conveyor Gallery and Junction House, Wagon Tippler), foundation of rail Track for Twin Boom Stacker, Wheel on Boom Reclaimer, Transfer car. Design of single storied MCC Buildings and three storied ECR Buildings (With Basement).

3. Estimation for Madharam Dolomite Mine and Jaggyapeta Limestone Mine. Estimation for Coal Storage Area in Vizag Steel Plant.

PROFESSIONAL QUALIFICATION:

Degree Year Examining Body Discipline Class/marks

Bachelor of

Engineering. (B.E)

2007 Jadavpur University Civil Engineering First Class with Honours. Grade -8.34 (77.34 %)

SCHOLASTIC QUALIFICATION:

Sl No. Examination Examining

Body

Institution Year of

passing

Class /

Division

Aggregate

1. Secondary

Examination

West Bengal

Board of

Secondary

examination

Dr. Shyama Prasad

Mukherjee

Institution

2001 I 85.5%

2. Higher

Secondary

Examination

West Bengal

Council of

Higher

Secondary

examination

Dr. Shyama Prasad

Mukherjee

Institution

2003 I 81%

PERSONAL DETAILS:

Father’s Name : Late Mr. Samir Kumar Chatterjee

Permanent Address : 32 A/8 Suren Sarkar Road

P.o.-Beleghata, City – Kolkata

State – West Bengal,

Pin- 700010, Country - India

Date of Birth : 29th April 1985.

Marital Status : Married.

Language Known : Bengali, English Hindi.

DECLARATION:

I hereby declare that the above-mentioned information is correct to the best of my knowledge and I bear the responsibility for the correctness of it.

Date: 07-August-2020

Place: Kolkata

(Saikat Chatterjee)

Contact this candidate