Welding Inspector

CCUURRRRIICCUULLUU

MM VVIITTAAEE

HARIKRUSHNA DESITI

Jyoti co op Hsg society ltd.

J-3,Room No-6,Ugantak complex

Sukapur, New panvel,

Pin-410206

Phone No- +91-766*******(India),

Email: *************@*****.***,*************@*****.*** OBJECTIVE:

To work in a competitive and creative environment on challenging assignment, where I could yield the twin benefit of my contribution to company’s development and realization of my potentials. PERSONAL PROFILE

• 8.5 years of experience as QC inspection Welding,Painting & NDT, Involved in Jacket Installation, Riser & Spool Fabrication, Topside Module Installation and Offshore and Pipeline Construction Project.Welding and Piping, pressure vessels in the field of Oil and Gas, pipelines, petrochemical refineries, Offshore/Onshore Oil & Gas Field.Team oriented with good communication and presentation skills, Enjoys challenging work environment with problem solving abilities, Ability to work both independently and collectively to achieve objectives, Good communication and Presentation skills, Hard and smart working under any circumstances. ACADEMIC INFORMATION

Bachelor Of Engineering: B.E. (Mechanical) in first Division from V.B.S PURVANCHAL UNIVERSITY,JANUPUR in 2010.

TECHNICAL CERTIFICATIONS

WELDING INSPECTOR (CSWIP3.1) certified from TWI, UK IN THE YEAR 2012.

BGAS-CSWIP Painting Inspector - Grade 2 certified from TWI, UK IN THE YEAR 2015.

ASNT Level II in PT, MT, RT, UT & RTFI

SAFETY COURSE

BOSIET

STCW

HUET

SUMMARY OF CAPABILITY AND EXPERIENCE

TOTAL 8.5 YEARS OF EXPERIENCE IN VARIOUS INSPECTION JOBS AS BELOW: Codes known ;

Conversant with various international codes and standards like ASME Sec.IX, ASME Sec.V, ASME Sec.VIII, Div.I & Div.II,ASME Sec.IX, ASME B.31.1, 31.3, 31.4, 31.8. API 1104,API 650,AWS D1.1. AND DNV & NACE.

From DEC 2018 to PRESENT

Position : QC INSPECTOR (WELDING AND COATING)

Company : (SAPURA ENERGY MALAYSIA)

Industry : OIL and GAS Industry ( OFFSHORE & ONSHORE) Project : 1). SUBSEA WELLS & PIPELINE REPLACEMENT PROJECT – V 2).PROVISION OF OFFSHORE/ONSHORE PIPELINE AND TERMINAL WORKS FOR FIFTH OIL BERTH PROJECT, MUMBAI, INDIA ("PROJECT'') Job Responsibilities:

Review of Quality Plan (ITP), procedures.

Qualifying the welders and welding operators to the applicable standards and procedures

Checking of weld joint preparation before welding as per Clients specification.

Check fit-up, bevel edge, root gap, root face, dimensional tolerance etc. as per the WPS

Ensure welding process, preheat and inter-pass temperature are in accordance to approved specification.

Inspection of welding activities according to Standards & Codes.

Ensure that essential variables are in accordance to approved specifications.

Maintaining the records of weld rejection rate & welder repair rate.

Verify that the joint geometry meets the requirements of the welding procedure and drawings.

Visual inspection and dimensional of completed weld against the specification requirements and drawings

Full fill the NDT Requirements according to specification.

Inspection of coatings (Heat shrink wraparound sleeves).

Holiday detection of field joints.

Inspection of High density Polyurethane Foam coatings. WORK EXPERIENCE:

From APRIL 2017 to NOV 2018

Position : QCI WELDING/MECHANICAL INSPECTOR (ARAMCO APPROVED) Company : JANA MARINE SERVICES KINGDOM OF SAUDI ARBIA Industry : OIL and GAS Industry ( ONSHORE & OFFSHORE) Project : OFFSHORE HOOK-UP, UPGRADE MODIFICATION,SCADA INSTALLATION

& COMMISSIONING SUPPORT.

From JAN 2014 to MAR 2017

Position : QA/ QC Engineer

Company : SUPREME OFFSHORE CONSTRUCTION & TECHNICAL SERVICES LIMITED. Industry : OIL and GAS Industry

Project : MHNRD Pipeline & Modification Project (ONGC)

(Riser & Jacket Clamps Fabrication,, I- Tubes & J- Tubes with Monel Sheathing,, Riser Protectors, Boat Landing,, Pipe Line End Manifold (PLEM),, Deck Extension, Launcher & Receivers & Other Top Side Piping Works.

From January 2011 to October 2013

Position : WELDING INSPECTOR

Company : Al Hoty Analytical Services. Manama; Kingdom of Bahrain Industry : OIL and GAS Industry

Job Responsibilities:

Co-ordinate with client inspector (TPI) & certification agency surveyors (CA) for inspection activities and documentation.

Witness painting as per ONGC codes/ requirement.

Verification and application of the requirements of the applicable welding codes,scope of work and issued for construction(IFC) drawings.

Verification against the documentation and marking of correctness of parent materials.

Review of WPS,PQR,ITP,Weld Plan,Procedures as per project specifications and standards.

Material verification with the support of mill test certificate (MTC).

Verification to ensure that the applicable welding procedures specification(WPS) are approved by the appropriate authorities prior to start any welding activities.

Verification and correctness of welding consumable such as welding electrodes,filler wires,consumable,inserts gases,fluxes,etc.

Witnessing of welders and welding procedures approval test as required.

Verification and validation the calibration certification of welding machines/equipment’s as per requirements.

Verification of dimensions fit-up and welds preparations in compliance with the applicable engineering standards and drawings.

Verification to ensure that adequate and valid welder approvals are available and only approved welders processing valid welding cards are used/ engaged in production/ activities.

Ensure that the approved welding procedures are employed in production/ process and / or activities.

Providing and guiding to welder to weld distortion control and welding sequence in accordance with job code requirements.

Perform surveillance visits/ inspection during welding and fabrication activities to verify and ensure the compliance with the specified procedures,including any pre-heat,interpass temperature control and post weld heat treatment (PWHT).

Visual inspection and dimension of completed weld against the specifications,requirements and drawings.

Monitoring welder performance and repair rates of each welder in accordance with job quality and code requirements.

Co-ordination with the TPI,CLIENT/ consultants to maintain the quality to move the project smoothly.

Walk through inspection,line chech-up and punch list preparation and punch list clearing of erected pie lines and piping’s.

Stage and final inspection of pressure vessels,piping,skids as per the drawing and requirements.

Preparation of final QC dossier for handing over the client and maintain proper filling system

(as per organization procedure) with full traceability for retrieving the document.

Interpretation of Radiographyic films and witnessing PT,UT & MT and review of PWHT charts.

Painting inspection with related activities.

Developing system and procedure for corrosion inspection including review project specifications comply with Inspection and Test Plan (ITP) and adhere to the related safety requirements as per the project specification.

Preparation of Quality control documents, preparing Weekly & Monthly Reports for Management and Clients, Weekly Meeting with Clients for Technical Clarification/Punch List clearance/Rectification of Deficiencies if any.

Ensure that all required qualifications are performed by contractor before project start Onshore & offshore (PQT, PPT). HSS(FJC)Application.

Coating material Verification-Review material certificates

Prequalification of pipe mill coating /lining system before production.

Experienced in different type of Coating System (3LPE, PU, HDPU, FBE, INTERNAL Coating and Concrete Coating Application) in PIPE MILL.

Ensure that documentation is issued by Contractor and suppliers in accordance with requirements for project

Coordination with client representatives, Inspection agency and Sub-contractor related to all quality assurance and quality control matters.

Leading the inspection team for adherence of projects quality procedures, specifications of ongoing project including quality, safety & etc.

Planning, initial set-up of equipment, materials and instruments for projects execution. PERSONAL SUMMARY:

FULL NAME : HARIKRUSHNA DESITI

GENDER : Male

DATE OF BIRTH : 27th April, 1987

LINGUISTIC PROFICIENCY : English, Hindi, Telugu,& Oriya FATHER’S NAME : Pitambara Desiti

NATIONALITY : Indian

Declaration:

I do hereby declare that all the information provided above is true to the best of my knowledge HARIKRUSHNA DESITI

Contact this candidate