`

Ashvin Gajanan Hiwarale

Mob- 800-***-****/ 702*******

Email: adfczw@r.postjobfree.com

CAREER OBJECTIVE

To work in a challenging and dynamic environment and to keep adding value to the organization that I represent and where I effectively contribute my professional, possessing technical and creative skills. CAREER SUMMARY

4+ years of experience as Design & development Engineer in Automobile product design, Construction machineries and equipment with involving from product concept Freeze to release.

Experience in concept building, 3D modelling, Piping, Routing, Creating BOM and Drafting activities.

Experience in design & development of sheet metal, plastic and casting component.

Experience in new product development (NPD) projects for both new and existing products & working with cross-functional team.

Design, detailing of various parts & assembly drawing preparation by using Cad tools like UGNX, Creo 4.0, Catia V5 & Solidworks.

Creating Top-Down and Bottom-Up assembly, creating weldment drawing and assembly drawings with application of GD&T, weld symbol & prepare GA drawing and Manufacturing drawings of component

Experience in review & quality check the created drawing before release.

Knowledge of DFM, DFA and DFS.

Knowledge of creating design documents like DFMEA, PPAP, APQP etc.

Design & promote new component & sub process of work flow.

Knowledge of drawing standards (ISO, DIN) and GD&T.

Involving to solve SPS (supplier problem sheet) documentation & Engineering Change Order

(ECO) and Change Request (ECR) through PDM link.

Involving to prepare O&M(operation and maintenance) document & prepare sequence of operation of project for supplier.

Basic knowledge of various Quality Standards for enhancing the operational efficiency and documentation.

KEY SKILLS

Good concept design skill, Capability to design plastic, casting & sheet metal parts independently

Extensive knowledge of mechanical and electro-mechanical systems and applications.

Well versed in automotive model development from component drawings.

Comprehensive knowledge of developing new design of chassis, brakes, mechanical, and electromechanical components for automotive, construction equipment, SPM etc.

New product development, developing components and sub-system from concept design to product release.

Excellent grasp on engineering and design principles along with understanding of manufacturing process and construction method.

Knowledge on Product life cycle management (PLM).

`

PROFESSIONAL EXPERIENCE

#1 Tata Elxsi Ltd, Pune: Duration: Feb 2019-Till

(MSM Consultancy Services)

Designation: Design Engineer

Client :- Tata Motors

Tool :- Creo 4.0 & Teamcenter

Project: - LP 407 33WB (BUS)

Design & Development of Chassis frame of Commercial Vehicle of LP407 33WB (BUS). Project Description:

Design & Development of Chassis frame for Commercial vehicle LP407 33WB (BUS) from SFC 407 29WB (TRUCK) & Shifted of all Attached Aggregates like ( Brakes system, Suspension, Fuel tank, Exhaust system, Axle, Steering, Controls, Routing, FES) with fully vehicle integration & layout. Job Responsibility:-

This activity is performed for Local and Global projects at different stages of project development which start from Concept Freeze to Release.

Input study – Need to Modified from SFC 407 29WB to 33WB.

Creation of JT from cad model.

Prepare CAD data as per customer input, create prototyping of this project & send to customer for design review.

Coordination with customer & interact with cross function team to resolve interference/ Development issue.

Design & modified of Chassis Long member & release the product for manufacturing.

Involving to handle large scale assembly of Commercial vehicle.

Proficient of Complete vehicle layout packaging and configuration of Chassis.

Working on vehicle DMU and Vehicle packaging.

Prepare top level assembly and create simplified representation. Create Assembly drawing

(Info Fitment Drawing and Table drawing) with application of GD & T, weld symbols.. Project: - Tata Prima 39WB, Tata Signa 39WB Tipper MEDIUM DUTY TIPPER (MDT), FRONT END TIPPER (FET), UNDER BODY TIPPER

(UBT)

Project Description: Design and development of load body of MDCV and HCV Exhaust system, Brake routing and Mounting brackets.

Job Responsibility:-

Design and detailing 3D modelling of automobile components especially load body of light and heavy duty commercial vehicle.

Design and develop with different wheel base, capacity and floor.

Design and Detailing 3D modeling of Exhaust system for Airoline fuel supply.

Design the various mounting brackets in sheet metal.

Preparation of different documents like as Interference report, modularity matrix, weight matrix.

`

Project: - Tata Ultra BS VI AMT 48WB and 68WB.

Project Description: Design and development Exhaust system, Brake routing and Mounting brackets. Job Responsibility:-

Design and Detailing 3D modeling of Brake system, Exhaust system for AMT (Automatic Transmission System) as per BS VI Vehicle.

Design and develop of air routing routing system.

Prepare the 3D model and drawing for manufacturing with BOM.

#2 SBD Auto Electronics Pvt. Ltd Pune: Duration: May 2017-Feb 2019 Designation: Design and Development Engineer

Clients:- Varroc Engineering Pvt. Ltd.

Chheda Electrical & Electronics Pvt. Ltd.

Cosmos Construction & Machineries equipment Pvt. Ltd Tool:- Solidworks 2017, Creo 2.0 and UGNX 11

Projects :- Auto Electrical and Auto Electronics parts for Two, Three and Four Wheelers as Flasher, Regulator & Rectifier, Relay, Cluster, Pickup coil, Charging coil, Magneto coil, Roof light, Switches, SPM, Material handling equipment, Construction Machineries like PM Lift, Batching plant, Concrete Mixers, Cement silo, Tough rider,Garbage separator machine etc. Job Responsibility:-

Design of 3D modelling of Plastic and Casting part as per customer requirement.

Providing design support at all stages of the design process.

Improving the design performance and efficiency of existing product.

Checking drawing for accuracy and errors.

Create tooling direction and check the draft analysis over the part.

Creation of sheet metal design development and nesting for manufacturing process.

Ability to manage large assembly model.

Preparation of GA drawing for Design approval process (DAP).

Taking trial out of machine and make respective changes in design.

Co-ordinating with QA related product validation & improving design accordingly.

Preparing of manufacturing drawing and applying GD&T symbol and Weld symbol according to functional requirements.

Handled the job of checking and correcting the complete Bill of Materials (BOM) of component before it is released to manufacturing.

Interaction with client regarding project query and discussion. Also handling small drafting team.

#3 GM Tools, Pune Duration: Sep 2015-April 2017

Designation : Design Engineer.

Tools: AutoCAD 2010, Catia V5 R21 and Creo 2.0.

M/s GM TOOLS is manufacturer of Drill, Reamer, Press tool work, Dies & Fixtures, All different type of CUTTER(Milling cutter, Spot face cutter, Woodruff cutter, etc.), Cutting tool & tool holder, Rotary broaches, work holding devices,Grooving tool And all types of Tool room work. Job Responsibility:-

Customer drawing readout.

Releasing 2D&3D drawing for manufacturing and preparation of BOM.

Development of components as per drawing provided by customer.

`

EDUCATIONAL QUALIFICATION:-

B.E Mechanical from SGBAU, Amravati University in 2015 with first class.

HSC Passed in the year 2011 with 58 %.

SSC Passed in the year 2009 with 68 %.

ACADMICS PROJECT:-

Final Project: An Investigative approach for improving the efficiency of solar cell. In this project an attempt is made to evaluate the effect of colours of light on performance of solar photovoltaic module, based on the temperature of cell an also based on the physical parameter is also developed to evaluate the efficiency of solar cell. Mini Project: Powered double hack saw by using scotch yoke mechanism. This model contains Power hack saw for cut the material from two side (right & left), Using scotch yoke mechanism, and rotary motion converted into reciprocating motion. Main Adv.:-Minimum effort to cut the material, easy to operated, low maintenance. Ex: -Wood cutting, MS cutting etc.

EXTRA ACTIVITY:-

Package knowledge Of MS-OFFICE (Word pad, Power point, MS Excel).

Paper presentation.

PERSONAL DETAILS:-

Father’s Name : Gajanan D Hiwarale

Date of Birth : 19/04/1994

Languages known : English, Hindi, Marathi.

Permanent Address : Behind Swami Vivekananda school, Rukhmini Nagar, Anjangaon Surji, Amravati (444705)

Current Address : Sr. No 45 Jagdamba society, Near Datta mandir, Somnath nagar, Vadgaon sheri, Vimannagar, Pune (411014)

Declaration:

The information provided above is correct as per my knowledge, and do not contain any wrong data. Date:

Place: Pune Ashvin G. Hiwarale

Contact this candidate