Instrument engineer
Resume:
CURRICULUM VITAE
Ashok Kumar R
Instrumentation Engineer
Mobile No: +917*********
Email: ***********@*****.***
Professional Experience:
9+Years of experience in projects, Instrumentation & Control system.
Installation, Quality Control (QC)& commissioning.
Glanding, Cabling & Termination.
Programming, Configuration and modification.
Control and Maintenance.
Provide Technical support and training at sites.
of PLC/DCS systems and I/O devices in Petro chemical and Desalination plants.
Monitoring & Controlling plant through both DCS/PLC.
Simulating the instruments through DCS/PLC.
Conversant with P & I diagram.
Able to read instrument data sheets for various field instruments, Preparation of instruments list, Review of P & I diagram Hook up diagram and process flow diagram.
Preparation of Technical Documentation like check list, punch list.
Co- Ordination with other disciplines and providing necessary technical support.
Technical discussion and documents approval from consultant/Client.
Control loop checking and Testing.
Planning maintenance schedule both preventive and Quarterly.
Calibration of various process control instruments.
Worked on computer based process control systems.
Troubleshooting of process control instruments.
Technical coordination with maintenance and Operation departments.
Co-ordination with operation team during plant startup& shut down.
Operational knowledge of industry standards and regulations, Sound knowledge of process
Plant Instrumentation.
Knowledge in chemical dosing for distillate water.
Remarkable ability to install equipment in hazardous areas
Spread out the precautions and effect of different types of hazardous, mainly H2S gas in oil & gas field to team members.
Familiarity in safety rules and regulations and job permit systems in petro chemical plants.
Excellent team member possessing good communication and interpersonal skills. I would take up assignments with enthusiasm and challenge, playing a positive role in the team and ability to interact with individuals at all levels.
Summary of Professional Experience:
NBTC ENGINEEERING&CONSTRUCTION COMPANY KUWAIT
Worked as an INSTRUMENTATION SUPERVISOR AT NBTC CONSTRUCTION COMPANY
KIPIC (Al Zour Refinery Project E30)
KIPIC OIL COMPANY –AL ZOUR KUWAIT
During the period of SEP2019 to TILL NOW
DODSAL ENGINEERING&CONSTRUCTION PTE.LTD KUWAIT
Worked as an INSTRUMENTATION SUPERVISOR AT DODSAL ENGINEERING.
Effluent Water Treatment & Injection Plant Project-EF/1761
KUWAIT OIL COMPANY –ABDALI KUWAIT
During the period of JUN 2017 to MAY 2019
BABU ENGINEERING CORPORATION
Worked as an INSTRUMENTATION ENGINEEER AT BABU ENGINEERING. Erection& Commissioning of Electrical& Instrumentation Works at
2X660 MW THERMAL PLANT NEYVELI TAMILNADU INDIA
During the period of NOV 2015 to JUN 2017.
L&T ATCO SAUDIARABIA
Worked as an INSTRUMENTATION SUPERVISOR AT L&T ATCO SAUDIARABIA. SADARA Petro chemical plant PACKAGE POLY ETHILINE.1&2
JUBIL SAUDIARABIA
During the period of OCT-2013 to OCT 2015
CHEMIN CONSULTING ENGINEER
Worked as an INSTRUMENTATION ENGINEER AT GHEMIN ENGINEERING.
Expansion for2X210MW Power THERMAL STATION -1
NLC INDIA LIMITEDTAMILNADU INDIA
During the period of May 2011 to OCT 2013.
Nature of Jobs:
In Depth knowledge in Control & Operations of SIEMENS SPPAT-3000 DCS and Allen Bradley SLC 500 PLC.
Installation, Hardware Configuration, Software Installation, Commissioning and Pre-Commissioning of pump and Auxiliaries Controls System along with field instrumentation (Collaboration with SIEMENS SPPA-T3000, Allen Bradley SLC 500).
Handled and Commissioned different types of Level transmitters/Switches like Ultra sonic, Radar, Capacitance, DP, Float, & Vibration.
Calibration of Control Valves with Smart Positioners like ABB/Siemens/Metso and Prepare Function Test for Motorized Valves/Actuators
Prepare Quality Plan for installation of Field Instruments, Equipment’s, Panels and Cabling to be maintained according to Engineering procedures and Request For Inspection (RFI), Field quality Plan (FQP), Quality Control Procedures (QCP), Inspection and Test Plans (ITP) with relevant Client QC Specs.
To Ensure the Quality Procedure is to be meeting by vendors and contractors. To monitor the performance of Site Acceptance test or witness and to ensure the Inspection checks to be strictly followed to the P&ID’s, Specifications, Standards and Permit.
Commissioning of Field Instruments/Loop Checking through DCS/PLC
Prepared Pre-commissioning activity such as: Instrument calibration test,
Continuity test, Leak test of tubing, Marks up drawing etc.
Supervision of Cable laying, Termination according to its Cable Schedule&Termination diagram
Project Construction Management, Field Engineering, Quality Control and Supervision & Co-ordination of all field instrumentation works in Projects.
Able to Manage & Lead a Project Team for Hardware/Installation Engineering issues
Conduct Factory Acceptance Test (FAT) and Site Acceptance Test (SAT).
Co-ordination with Purchase Department for Order, Processing, Procurement/Logistics activities including that with 3rd party suppliers.
Monitoring the Reports & Check Sheets on the status of the Instrument Calibrated, Function Test, Cable Continuity Test, Loop Check and Operation Check.
Hands on experience in Quality, Calibration, Erection & Commissioning of,
Pressure Transmitters/Switches/Gauges.
Flow Transmitters/Switches (Magnetic/Ultra-Sonic/DP).
Level Transmitters/Switches (Ultra sonic, Radar, Capacitance, DP, Float, & Vibration fork).
Temperature Transmitters/Gauges(Thermocouples/RTD).
Motorized valves & Control Valves (LUV, FCV, PCV, and TVC).
Vibration Sensors.
Conductivity analyzer and pH analyzer (Online and portable meters).
Supervision of Tray work, Preparation of Conduits Routing, Fabrication of Field Instrument Stanchions, Junction Box, Impulse piping and Leak proof testing.
Supervision of Instrumentation Signal & Control Cable laying, Ferruling, Glanding & Termination, Dressing with correct size lugs, Wire marker, Cable cleats, Cable ties, Cable tags and Loop Checking according to Cable Schedule .
Technical coordination with maintenance and Operation departments.
Planning and Executing with Clients/Project team members/Contractors/Sub-Contractors to complete the given project at right schedule, Quality according to approved Field Quality Plans (FQP) and Safety Norms.
Make of Instruments Handled:
PLC - Allen Bradley, Siemens.
DCS - Siemens.
Pumps - Torishima, Grundfos
Control valves - Flow serve, Flow bus, Provel
Motorized valve - Auma
Pressure transmitters - Rosemount, Yokogawa.
Level Transmitter/switch - Siemens, Nivo, Krohne, Honeywell and Yokogawa.
Flow Transmitter/Switch - Siemens, Krohne, Nivo, Enders Hauser.
Limit switches - Honeywell, ABB.
Smart Positioners - Siemens, ABB, Metso.
Temperature Transmitters - Rosemount.
Speed - Jaquet.
Calibration Equipment’s - Dead Weight Tester, Hart Communicator (Emerson).
Conductivity & pH Analyzer - Endress-Hauser, Hach.
Vibration Monitors - Bentley Nevada.
Personal Strength :
Site Management and Maintenance.
Well-coordinated and Proactive Team Member.
Give Full commitment to meet work deadlines.
Reporting to Project Administration timely.
Qualifications:
B.E - Electronics & Instrumentation Engineering completed in MAM College of Engineering,
Anna University 2007-2011(Trichy)BE-education passed in first class [64%].
Professional Training:
Undergone in-Plant training in Yakagowa Limited – PLC, DCS Overview
Academic Projects:
Engineering Project in Automation of Household Electronic Device Operation & Control through Human Voice.
Software Skills:
Languages: Basic in C, C++.
Operating Systems: Windows.
Office Tools: MS-Office, Open office.
Personal Profile:
Sex: Male.
Religion: Hindu.
Nationality: Indian.
Date of Birth: 26.03.1989
Passport No: K3275251
Marital Status: Married.
Languages known Tamil, English, Hindi, Malayalam
Permanent Address: No 92 STQ GK Colony,
Neyveli-2, Tamilnadu
India-607 802.
Declaration
I hereby declare that the above furnished information is true to my knowledge.
BY
(R.ASHOK KUMAR)
Contact this candidate