Sheet Metal Design Engineer

RICHARD LASZCZEWSKI JR. email: *******@*******.***

**** * ***** **. *******, Il. 60630 Cel. 219-***-**** Tel. 574-***-****

EXPERENCE:

*/**-******* ***** & WHITNEY, AUTOAIR, INC. (PANTHER CONSULTING) Lansing, MI.

Design Engineer

I am working as contractor responsible for the design and development of tooling and hold down designs for jet engine nacelle components. They are customer driven conditions. The components follow the customer’s air flow lines. The customers are Rolls-Royce, General Electric & Pratt Whitney. Did all my own Designing, Drafting, and Checking. I have used SEP for TStacks, Pro/Creo 3.0, Solids, Surfacing, Sheet metal, Power Point, Wildfire Ref: Paul Ackley 517-***-****

2/17-6/18 WHIRLPOOL CORP. (AMERIT CONSULTING) St. Joseph, MI.

CAD Designer

I worked as contractor responsible for the design and development of multiple designs for Whirlpool, Maytag, Kitchen Aid and JenAir dishwashers. They are Spraying Systems, Filter Wash and Drain Systems and LED Lighting application. Put into production on the installation of the new washer system components. Did all my own SLS molded parts, Designing, Drafting, and Checking. I have used SEP for TStacks, Pro/Creo 3.0, Solids, Surfacing, Sheet metal, Power Point, Windchill, Pro/Cable, and Autocad. Ref: Jeff Taylor 269-***-****

2/15-12/16 CHICAGO ORNAMENTAL IRON Chicago, Il.

Project Manager

Responsible for new ornamental iron work / construction projects coordination. Design concepts using Structural, Sheetmetal, Tubing and Extrusions for the layout of new construction projects. On all designs I worked new designs then detailed parts and assemblies, I apply ANSI, AISI, and COI standards.

I used AutoCad 2015, Solidworks Ref: Jonathan Samek 773-***-****

11/14-2/15 GENERAL GROWTH PROPERTY (Insight global) Chicago, Il.

CAD Engineer

I layer AP's and plot new drawings for wireless project. Responsible for new layouts for WiFi install locations at all of their shopping malls. After Ekahau readings have been taken I would create layout of the new network. I used AutoCad 2014, Microsoft Office,

Microsoft Visio, Excel, Adobe Acrobat.

Ref: Julius Caten 214-***-**** cell

1/11-10/14 CASE NEW HOLLAND (Larsen & Toubro) Burr Ridge, Il.

Design Engineer

Responsible for new designs on new planters and cultivators. Designed various components (Castings, Sheetmetal, Hose, Tubing and Cabling) for the layout of new planter arr. hose/air lines and harness arr. On all designs I worked new designs then detailed parts and assemblies, I applied GD&T tolerance, ANSI, ISO, and CNH standards. Worked to convert data from PDM to Teamcenter. I used Pro/e Creo 2.0, Solids, Surface, Proe Lines, Proe Cable, Power Point, Teamcenter. Ref: Marvin Prickel 630-***-****

1/09-10/10 UT Controls (Kelly Services) Huntington, IN.

Component/Design Engineer

I worked as contractor for various divisions (Carrier, Bryant, Transcold) on the development of new and existing thermostats units. I have designed enclosures using LCD's or LCD touch panels in new or redevelop existing units. I have redesigned failed units on mechanical design flaws that have increased yeilds for production. I am in direct contact with tool suppliers and part vendors to address new and production units. I am also component engineer for these divisions responsible for Plastics, Sheet Metal & Rubber. Did all my own Designing, Drafting and Checking for all projects. I have used Pro/e Wildfire 5.0, Solids, Surfacing, Sheet metal, Autocad 2000, Power Point, Windchill.

Ref: Paul Hart 260-***-****, Scott Sorg 260-***-****, Michael Smyth 260-***-****

6/05-5/08 IMI Cornelius Inc. (Total Tech) Glendale Heights, IL.

CAD Designer

I worked as contractor on the development of a new lab unit, which had a LCD touch panel on each of the 3 dispensing heads. They were mounted on the top of a refrigeration unit. I have designed a new pump for dispensing concentrate orange juice. I have redesigned a new refrigeration system to an existing dispenser, which increased market shares for them. I designed new thermo formed cladding for various dispensers. Did all my own Designing, Drafting and checking for all projects. I have used Pro/e Wildfire 3.0, Solids, Surfacing, Sheet metal, Intralink, AutoCAD 2000, Power Point, Windchill.

Ref: Dennis Tortorella 630-***-**** Scott Sevick 630-***-****

4/04-6/05 ITW Fastex (AeroTek) Des Plaines, IL.

CAD Designer

I worked as contractor responsible for preparing company’s documentation, this included all drawings & ecn’s for first time ISO approval. I have worked with new designs of specialized parts this included: PCB supports, retainers, card edges, lampholders, rivets, plugs, anchors, bumpers and sheet metal retainers for various conditions in the following industries, automotive, appliance, electronics, furniture manufactures. Designed new tooling for sheet metal stampings and bumper feed tool for production line. Did all my own Designing, Drafting, and Checking for any new/old projects. I have used Pro/e 2001, Wildfire 2.0, Solids, Surfacing, Sheet metal, Intralink, Autocad, Cadkey.

Ref: Bob Dam 847-***-****

10/01-3/04 EMERSON APPLIANCE CONTROLS (Manpower) Indianapolis, IN.

CAD Designer

I worked as contractor responsible for the design and development of new production timer test unit for a new line. The test units had to support circuit boards, CPU with monitor, keyboard, and printer. The unit tested multiple timers at one time. I have also designed an oven door lock out of sheet metal/plastic components. Did all my own Designing, Drafting, and Checking. I have used Pro/e 200i2, 2001, Solids, Surface, Sheet metal, Power Point, Intralink.

Ref: Mike Deming 317-***-****

6/01-10/01 FRANKLIN ELECTRIC (ATSI) Bluffton, IN.

CAD Designer/ Mentor

I worked as contractor responsible for the design of new line industrial motor castings. Did all my own Designing, Drafting, and Checking. I have also training new users in Pro/e 2001, Solids, Sheet metal and Intralink. Ref: Dave Putterbaugh 219-***-****

9/00-5/01 EMERSON APPLIANCE CONTROLS (Manpower) Indianapolis, IN.

CAD Designer

I worked as contractor responsible for the design and development of new control valve for icemaker in refrigerator. I have also designed an oven door lock out of sheet metal/plastic components. Redesigned Washer/Dryer push to start timers. Designed their components, which consisted of various types of plastics, injected moldings and sheet metal stampings. Did all my own Designing, Drafting, and Checking. I have used Pro/e 200i2, 2001, Solids, Surfacing, Sheet metal, Power Point, Intralink. Ref: Mike Deming 317-***-****

5/98-9/00 WHIRLPOOL CORP. (ATSI) St. Joseph, MI.

CAD Designer

I worked as contractor responsible for the design and development of a multiple docking system for Kitchen Aid dishwashers. This is patented the system has a 2-step blow molded feed tube and an injected molded valve housing with a silicon molded membrane valve. I have also designed a rotary sealed bearing for a dual feed application, and a utensil basket that required some advanced surfacing. Worked with production on the installation of the new washer system components. Did all my own SLS molded parts, Designing, Drafting, and Checking. I have used Pro/e 2000, Solids, Surfacing, Sheet metal, Power Point, Intralink, Pro/Cable, and Autocad. Ref: Roger Bertsch 269-***-****

1/97-5/98 LANDIS & GYR (ATSI) Lafayette, IN.

CAD Designer

I worked as contractor responsible for the design and manufacturing of a new line of solid-state residential and commercial electrical meter. The design required no fasteners; all fasting was incorporated into the piece parts. Applied GD&T tolerance, ANSI, NEMA, UL, and Landis & Gyr Standards to all part and sub-assembly drawings. Responsible for implementing and establishing ISO 9000 standards. Did all my own FDM molded plastic parts, Designing, Drafting, and Checking. I have used Pro/e Solids, Surfacing, Sheet metal, Power Point, PDM, and Autocad. Ref: Jodie Potter

1/95-1/97 ALLOY CUSTOM PRODUCTS INC. (Manpower) Delphi, IN.

CAD Designer

I worked as contractor responsible for the design, development and manufacturing of pressure vessels and cryogenic trailers. The designs had to follow ASME Code Section VIII Div 1, FDA, NEMA and UL standards for all pressure/food vessels, equipment included kettle cookers, mixers, blenders, heat exchangers, jacketed vessels and cryogenic trailers. Worked from quotation stage to the manufacturing stage. This would require making/checking design drawings which incorporated customer standards, running calculations to prove design then getting approval by customers, then contacting vendors regarding materials and any spec sheets for ASME code inspectors. Designed components, which consisted of machined exotic steels (Hasteloy, Inconel, Monel) also sheet metal stampings along with code weldment on all vessels. Did my own Designing, Drafting, and Checking. I have used AutoCad and Vellium. Ref: Louis Blum 765-***-****

4/92-1/95 CATERPILLAR (Manpower) Lafayette, IN.

CAD Designer

I worked as contractor responsible for the design detailing and checking of the implementation of the electronic ignition system on 3500 Series gas engines. Designed wiring harnesses using MIL Spec and CSA standards for 8, 12 and 16 cylinder engines. Designed machine components, castings, and sheetmetal enclosures for sensory equipment, gages, terminals, and cable harnesses. All Designs and Drawings had to apply geometric tolerance, ANSI, ISO, and Caterpillar standards. Did all my own Designing, Drafting, and Checking. I have used Pro/e Solids, Capt Graphics, AutoCad. Ref: Kevin Bruch 765-***-****

4/91-4/92 MILES LAB DIAGNOSTICS (ATSI) Elkhart, IN.

CAD Designer

I worked as contractor responsible for the design and development of a urinary medical testing unit. The unit incorporated electronics, fiber optics, molded plastics, sheet metal stampings, and cable routing. Contacted vendors for proto type parts and tooling. Reworked and redesigned all concept drawings and making them production ready. Used geometric tolerances, ISO, ANSI, UL and Miles standards on all Designs. Did all my own Designing, Drafting, and Checking. I have used Intergraph 2D, Intergraph 3D and EMS. Received a plaque from Miles Lab for appreciation of my efforts.

Ref: Jack Zidama 219-***-****

11/87-4/91 OTIS ELEVATOR Bloomington, IN.

CAD Designer

Responsible for the design of new elevator installations. This included running load calculations and following regional requirements. (ANSI, UL, OTIS,

earthquake, building and code) All drawings of hoist way conditions from machine rooms to any rail conditions. Elevator types included hydraulic, geared and gearless. Also worked on a revamping of existing equipment for modernization project. Did all my own Drafting, and Checking. I have used Schlumber 3D, Pro/e Solids, Intralink.

Ref: Chuck Breslin 812-***-****

8/83-11/87 RADIANT PRODUCTS Chicago, IL

Design Engineer

Responsible for the design and development of custom finishing systems, (industrial ovens, washers, dryers, heat recovery unit, paint booths). Equipment was designed around customer’s product and assembly line with customers needs in mind. Because of the various types of products and conditions field surveys were taken first, then building conditions (layout, locations, an service) were looked at for fit-ups of new equipment, this was done before I could do any design. As with all designs I was in constant contact with customer, coating or finishing manufacturers and various suppliers. After designs were approved with customers I would make all the drawings (structural and mechanical layouts, wiring diagrams, sheetmetal enclosures for equipment, HVAC, piping, parts, assemblies and sub-assemblies) needed to complete the job. I was responsible for making sure that all systems were done according to all approved prints and passed UL, ANSI standards along with local building codes. Did all my own Designing, Drafting, and Checking. All work was done on drafting board and manual calculations (no software available). All work was done manually, drafting was done on a drafting board and all calculations were done with no software applications.

Ref: Harry Bekenstien (Decessed)

EDUCATION:

1994 PURDUE UNIVERSITY Lafayette, IN

Course: CAD/CAM Solid Modeling

Studied: Pro-E Software (Parametric Technology Corp.) Received 4.0 G.P.A. upon completion.

1992 CATERPILLAR CORPORATION Lafayette, IN

Course: Geometric Tolerancing and Software Training

Studied: Geometric Tolerancing and Application of Tolerancing. Trained on the following Caterpillar Software, CAPT Graphics (Anvil), Engineering Data System (EDS), Engineering Data Utilities (EDU), Engineering Drawing Notice (EDN), Amipro, Lotus 123 and Freelance Graphics. Received Certificates upon completion.

1988 HARPER COLLEGE Palatine, IL

Course: CAD/CAM Graphics I, II

Studied: Applicon (Schlumber) along with Autocad Software. Received 3.6 G.P.A upon completion.

1981 ELECTRIC ASSOCIATION Chicago, IL

Course: Fundamentals of Industrial and Residential Lighting

Studied: Basics of Incandescent, Fluorescent, Halogen, Mercury Vapor

and Metal Halide Lamps for there efficiencies and uses. Received a certificate upon completion.

1977 DALEY COLLEGE Chicago, IL

Course: Technical Graphics

Studied: All phases of Mechanical, Architectural and Electrical Graphics

Drawings. Received Certificate upon completion.

1975 IVY TECH COLLEGE Lafayette, IN

Course: Building Trades Blueprint Reading and Drafting

Studied: All phases of Mechanical, Architectural and Electrical

Drawings. Received 3.0 G.P.A. upon completion.

SOFTWARE EXPERENCE:

PTC Pro/Engineer versions 12 thru Creo 2.0 Surfacing,15100 hrs Solids, 11850 hrs. Sheetmetal 1320 hrs Intralink & 3720 hrs Cabling, 2152 hrs Windchill 12325 hrs. AutoCad(2015)5520hrs. InterGraph 10000 hrs. Anvil,1133 hrs Teamcenter 5325 hrs.

I have trained or guided (new and old) users with any of the previous softwares.

Contact this candidate