Engineer Piping
Resume:
ADNOC Classification: Internal
RONALDO C. QUILON
Contact No. +971*********
Email Add: *********@*****.***
SUMMARY PROFILE:
A Mechanical Engineering professional with expertise in Construction/ Quality Inspection of various discipline such as piping, structural, welding, painting, tanks, auditing and policy implementation acquired during 15 years’ experience in petrochemical/ oil and gas sector
Working experience from sub-contractor to contractor to client/ owner, from fabrication to commissioning/ start-up and from starting of the project to completion of the project within 15 years for various Oil & Gas Construction project such as Gas Plant, Gas Facility Plant, Olefin Plant, Core Hydrocarbon Facilities, etc.
Expertise in preparation and close-out of Project QAQC Dossier.
Certification Scheme of Welding Inspection Personnel, CSWIP 3.1 from The Welding Institute
(TWI) and Saudi Aramco Approved QC Welding Inspector, QC Piping and QA/ QC Supervisor.
Certified QMS ISO 9001:2008 Auditor (IRCA).
Achieved TOTAL QUALITY MANAGEMENT certification.
Undergo PROJECT MANAGEMENT SKILLS - PROJECT MANAGEMENT PROFESSIONAL training.
Developed and Implemented Asset Integrity Reliability Management System (AIRMS) and Energy Management System (EnMS) in the Company.
Trained in Incident and Root Cause Analysis (RCA)
Emergency First Aider Certified.
Achieved ASNT Level II in RT, UT, MT and PT.
Thoroughly familiar with ASME, API, NFPA and standards.
Trained in safety requirements at oil and gas, Occupational Safety and Health
(offshore/onshore).
Holding UAE & KSA Driving license.
EXPERIENCE SUMMARY:
COMPANY: Abu Dhabi National Oil Company (ADNOC Distribution) POSITION: Mechanical/Piping Engineer
DATE: November 2015 – September 2020
Duties and Responsibilities
Report technically to Technical Integrity Department Manager and responsible for monitoring progress and performance of the construction by the contractor that they perform as per approved schedule, scope of work in line with the specification and standard.
Develop and implementing Asset Integrity Reliability Management System in the Company.
Monitors submission of Project documents from Contractors for review/ approval and keeping updated.
Works to Develop/ Review/ Implement Quality Control Documents; Quality Manual, Quality Plans, Procedures, Method Statements, Inspection and Test Plans.
Providing technical assistance such as piping designs, codes and standards, tanks/ piping repairs, etc.
ADNOC Classification: Internal
Provides technical Review/ Approval of Quality Plans, Inspection and Test Plans, Procedures and Method Statements for self-performed work, contractors, and suppliers.
Responsible for overseeing all QA/QC and construction activities of Contractors as well as Health, Safety & Environment concerns.
Ensures interpretation of Project specifications, Applicable International and standards to ensure these requirements are included in those documents and are implemented during project execution.
Ensures Contractor Engineers, QA/QC and HSSE Personnel to be supervised.
Assists or perform Inspection Engineers/ Asset Integrity Engineer jobs in case of non-availability of the personnel.
Provides and collecting factual QC/ Inspection data, preparing and presenting monthly reports to Department Manager.
Final approving of Project QA/QC Dossier close-out.
Processes Development and maintaining required quality documentation for handover to end- user in accordance with contract requirements.
Coordinates to their technical areas and co-ordination with Inspection Engineers/ Asset Integrity Engineer where areas interface or overlap.
Performs Site Visit and Integrity Inspection as per project requirements. CLIENT: SAUDI ARAMCO, ONGC, ADMA
COMPANY: Mc Dermott Middle East
POSITION: QA/QC INSPECTOR, Mechanical/Piping (onshore) QA/QC SUPERVISOR (offshore)
DATE: January 2012 – September 2015
Duties and Responsibilities (onshore) – QA/QC INSPECTOR, MECHANICAL
Conducting Welding Procedure Qualification and Procedure Qualification Record.
Conducting Welders Qualification Testing.
Materials checking prior to fit-up inspection as per updated drawing.
Welding process and visual inspection both piping and structural.
Monitor and control welding parameters, preheat, inter pass temperature and heat input.
Conduct tool box meeting to welding foremen/leadsmen, piping foremen/leadsmen, pipefitters and welders regarding quality and safety issues.
Attending and guide the welder during excavation and welding of repairs joints.
Test pack review.
Dealing with client from inspection department prior to product acceptance.
Punch listing and reinstatement for both structural and piping.
Assess NDT requirements.
Pressure testing.
Duties and Responsibilities (offshore) – QA/QC SUPERVISOR
Review and Prepare Project documents, Method of Statements, Procedures, ITP prior to demobilize to offshore project.
Identify number of QC Inspectors, NDT Technicians, QC tools, welders and NDT consumables as per client requirements.
Ensures all machines/ inspection tools are in good condition and calibrated. ADNOC Classification: Internal
Supervise and coordinate the implementation of a site specific QMS to monitor receipt inspection, construction, assembly, and protection/preservation portions of the Work to ensure compliance with the Company technical requirements. Line of reporting will be the Site QA/QC Manager
Provide continuous quality assurance oversight at the construction Work Site to verify the work complies with Company Technical Requirements, and assure adherence to applicable codes and standards as they apply.
Monitor and verify progress report from the construction point of view.
Closeout Project QA/QC Dossier.
POSITION: QC Inspector, Welding/ Piping/ NDT
COMPANY: North Road General Contracting Est. Kingdom of Saudi Arabia PROJECTS: Karan Gas Facilities Proj., UTMN Pipeline, Manifa Core Hydrocarbon Facilities Project. DATE: February 2010 - Jan 2012 (Supplied to: Hyundai Engineering and SAIPEM Arabia) CLIENT: ARAMCO
COMPANY: Consolidated Contractors Company
PROJECT: Khursaniya Gas Plant Project, Kingdom of Saudi Arabia POSITION: Piping Engineer (August 2007 to December 2008) QC Welding/ Piping Inspector (December 2008 to December 2009) DATE: August 2007 – December 2009
CLIENT: PetroRabigh
COMPANY: Japan Gas Company
PROJECT: PetroRabigh Olefin Plant Project, Kingdom of Saudi Arabia POSITION: Piping Engineer
DATE: January 2006 – May 2007
Summary Job Responsibilities: (QC Inspector Welding/ Piping/ NDT)
Receiving and releasing material Inspection.
Ensure all equipment and testing materials are in good condition as per company standard requirements.
Review/verify isometric drawings, P&ID, construction drawing as per latest revision.
Welder’s qualification screening, Review Welding Procedure Specifications, Welding Process Qualification, welding consumables certificates, Welding equipment conditions and ensure Fabrication shop is being adhered as per company requirements.
Piping/ structural fit-up inspection.
Welding process and final inspection.
Assess NDT result.
Educate pipefitters, welders together with their foremen in regards with the procedures being followed.
Attend welding repair and guide welders to locate the defect as per X-ray traceability.
Deal with client representative for any QAQC documents they requires.
Piping punch listing, witness/ inspect hydro/ Pneumatic testing ADNOC Classification: Internal
Duties and Responsibilities: (Piping Engineer)
Study and understand the blueprints of designs prepared by planners.
Supervise the supervising installation works properly.
Plan and schedule the work within the given deadlines.
Ensure the efficiency of the piping system that if it is working properly.
Allocate responsibilities to the workers.
Responsible for ensuring the job progresses as per schedule timely.
Interact with the planners to discuss plans and clarify installation process as well.
Visit the place of work from time to time to ensure progress are being followed as per scheduled without compromising the safety and quality of the process.
Ensure the safety measures and procedures at the work place and needs to implement them as well.
Closely monitor the piping and its components punch listing, re-instatement and pre- commissioning along with QC Piping Inspectors.
Prepare the documents at the various stages of development of the project such as test package, Project QC Dossiers, Progress reports, etc. PROJECT : PETRON BATAAN REFINERY/OFF-SITE AUTOMATION PROJECT COMPANY : Engineering Equipment Industries Corporation (EEI) POSITION : WELDING/PIPING FABRICATION ENGINEER
DATE : December 2004 – January 2006
Job Responsibilities:
Material Inspection.
Review isometric drawings as per latest revision.
Fit-up Inspection.
Visual Inspection.
Update welding production report.
Spool releasing.
--END--
Contact this candidate