QC Engineer
Resume:
ASFAR AHMAD
adf5lm@r.postjobfree.com /adf5lm@r.postjobfree.com
Address: - KHAN BAHADUR ROAD, JEHANABAD, BIHAR, INDIA Contact no: - +966 – 563181068 +917*********
Mechanical Engineer (MEP, ECS & TVS)
Total Work Experience: -
Above 12 years Gulf Experience in Construction/ Rail Metro//Building/Airport//Hospital PROFILE
Result oriented hand on construction and development professional with above 12 years Gulf Experience in all industry. verification track record for the successful completion of multimillion-dollar project through coordination, developing partnership and building report of engineers, local official, vendor, and clients while maintain cost, while project estimation, implement design problem, document preparation, building codes, and regulation, material purchasing, site management through certification. AREA EXPERTISE LIES IN: -
To handle and manage the project in all aspects
Review and Implementation of drawings.
Changes the Shop Drawing and M.E.P Coordination Drawing as per the Project specification.
Review of M.E.P Drawing, Coordination Drawing Builder work drawing as per the site suit condition.
Check and review the Structural and R.C.P Drawing and coordinate that drawing with M.E.P Drawings.
Quality control management
To command the project in very smooth way
Quality Control Management
To get the work done from sub-ordinate and sub-contractors.
To deal with client in attractive way.
Good co-ordination with client, colleagues and sub-contractors in attractive way.
Scheduling of Preventive Maintenance.
Fault finding in Electrical Controlling panel and production machines.
Able to do work in any situation.
PROJECT HIGHLIGHT
TVS Coordinator
Salini Impregilo (June 2020 to till date)
Project: - Riyadh Metro Project (RMP) Line 3
Duties:
Having the knowledge of installation for the metro project, e.g. Tunnel Ventilation Fans, Tunnel Ventilation Damper, Cone,Sound attenuator, Spacer Jet Fans Installation, OTE/UPE Grill
Having the knowledge of review Design drawing for TVS system.
Having the knowledge of review Shop drawing for TVS system.
Having the knowledge of all types of damper opening related to TVS system.
Having the knowledge of to check the fan plinth size, Axis of the opening, Damper acroterium.
Having the knowledge of check all the opening size before installation.
Having the knowledge of to prepare the obstruction report as per the coordination drawing.
Having the knowledge and Experience of installation, all Types of mechanical equipment Like, Axial Fans. Jet Fans, Motorized Damper, Sound attenuator, Jet Fans.
Monitor the effective implementation of appropriate project procedure and provide for updating line during project progression, Monitoring of all project System and processes.
Knowledge of Civil coordination any types of opening, like over track, over platform, over track grill opening.
Having the knowledge and experience in All Types of Motorized Damper installation in Plenum Room.
Having the knowledge of T&C for TVS system
Coordinate with quality inspections with all the site sub-contractors. Coordinate all site issue.
Making reports of outstanding works.
Coordinate all the site issue inspections through the site Engineer
Coordinating with site engineer while the inspection is being carried out and offer any clarifications as required.
Consider the implications of delays in as-built turnover documentation and bring to the attention of the project manager.
TVS Engineer
Axima Saudi Limited (Jan 2019 to May 2020)
Project: - Riyadh Metro Project (RMP) Line 1&2
Duties:
Having the knowledge of installation for the metro project, e.g. Tunnel Ventilation Fans, Tunnel Ventilation Damper, Transition Duct, Sound attenuator, Jet Fans Installation, Sliding plate damper.
Having the knowledge of review shop drawing for TVS system.
Having the knowledge of all types of damper opening related to TVS system.
Having the knowledge of to check the fan plinth size, Axis of the opening, Damper acroterium.
Having the knowledge of check all the opening at the time of civil handover.
Having the knowledge of to prepare the obstruction report as per the coordination drawing.
Having the knowledge and Experience of installation, all Types of mechanical equipment Like, Axial Fans. Jet Fans, Motorized Damper, Sound attenuator, Jet Fans.
Monitor the effective implementation of appropriate project procedure and provide for updating line during project progression, Monitoring of all project System and processes.
Knowledge of Civil coordination any types of opening, like over track, over platform, over track Damper opening.
Having the knowledge and experience in All Types of Motorized Damper installation in Plenum Room.
Having the knowledge of all types TVS material unloading at warehouse.
Coordinate with quality inspections with all the site sub-contractors. Coordinate all site issue.
Making control sheet before requests for inspection with consultants / clients etc.
Coordinate all the client inspections through the site QC Engineer
Coordinating with clients / consultants while the inspection is being carried out and offer any clarifications as required.
Consider the implications of delays in as-built turnover documentation and bring to the attention of the project manager.
TVS Coordinator
Mitsubishi Heavy Industries (May 2017 to Nov 2018) Project: - Doha Metro Rail Corporation (DMRC) phase I
Duties:
Having the knowledge of coordination for the project inspection, e.g. Tunnel Ventilation Fans, Tunnel Ventilation Damper, Diffuser, Silencer, Nozzle duct, Jet Fans Installation, AHU, CHW Pipe, Duct, Cable tray installation.
Having the knowledge of all types of damper opening related to TVS system.
Having the knowledge of check all the opening at the time of civil handover.
Having the knowledge of ICF and prepared the checklist as per the ICF.
Having the knowledge of All Types of Panel installation like, VSD, DB, AHU control cabinet, and Break resistor. Related to TVS system,
Having the knowledge and Experience in Commissioning, all Types of mechanical & Electrical Instrument Like, Axial Fan. AHU, Damper, Silencer, Jet Fans. Electrical cabinet.
Monitor the effective implementation of appropriate project procedure and provide for updating line during project progression, Monitoring of all project System and processes.
Knowledge of Civil coordination any types of opening, like CHW Pipe, Cable tray penetration. Damper opening.
Having the knowledge and experience in All Types of damper in Plenum Room.
Coordinate with quality inspections with all the site sub-contractors. Coordinate all site issue.
Making punch lists before making requests for inspection with consultants / clients etc.
Coordinate all the client inspections through the site QC Engineer
Coordinating with clients / consultants while the inspection is being carried out and offer any clarifications as required.
Consider the implications of delays in as-built turnover documentation and bring to the attention of the site construction manager.
QA/QC Engineer
Takyeef Electromechanical (Doha Qatar) (Feb 2016 to March 2017) Project: - Dafer Hallawa Villa Pearl Qatar
Duties:
Prepare and maintain the different test format for the project inspection, Fan, Installation Check list, AHU, FCU, Pump, CHW Pipe, Duct, Heat Exchanger checklist, Junction box installation, Cable ladder tray installation.
Having the knowledge and Experience in commissioning, all types of Fire Fighting system.
Management of Project Specific Audit and NCR cases and actions utilizing System.
Maintain and Execute the Project Audit Schedule, and execute other Project or Department as required.
Having the knowledge and Experience in Commissioning, all Types of Mechanical Instrument Cal like AHU, FCU, Heat Exchanger, Pump, Pressure Safety Valve, and Pressure Testing. As per ISO Standard.
Manage and undertake the Work process for Project Specific function and non-conformance reporting. (NCR)
Monitor the effective implementation of appropriate project procedure and provide for updating line during project progression, Monitoring of all project System and processes as per project quality management system audit and review.
Having the Knowledge and Experience in BMS (Building Management Construction)
Knowledge of Civil like Trench for CHW Pipe and Shaft Opening of Concrete Area.
Excavation and Trench work, pipe laying grounding system.
Having Knowledge and experience in PVC and PPR Pipes,
Installation of Fire Hose Cabinet, Implement the QA/QC management system at site
Coordinate with quality inspections with all the site sub-contractors and vendors coordinate all nondestructive testing on site.
Making punch lists before making requests for inspection with consultants / clients etc.
Prepare ITP (Inspection Test Plan) ITP Tracking and IRP Log.
Distribute relevant QA/QC documentation to site subcontractors
Coordinate all the quality site inspections through the site QC inspectors
Review the customer’s specification and undertake relevant training to the site QC inspector.
Final checking after the punch list has been attended and offers the line for inspection by submitting the IRE.
Coordinating with clients / consultants while the inspection is being carried out and offer any clarifications as required.
Monitor hydrostatic test packs for incorporation into as-built dossiers
Consider the implications of delays in QC as-built turnover documentation and bring to the attention of the site QC manager
Develop the Project quality plan, Assist the Project Manager in Implementation the Project Quality Plan, and Developing additional quality related procedure and interface as deemed necessary by the Contract requirement.
All QA/QC Documentation Work
Prepare Method Statement as per Project Specification.
Prepare and Closed NCN (Non-Conformance Notice), FCR (Field Changed Request) And SDR
(Surveillance deficiency Report).
Prepare KPI (Key Performance Indicator)
Having the knowledge and experience of design drawing review, e.g. HVAC, CHW Pipe, AHU, FCU, Firefighting pipe and drainage pipe.
QA/QC Engineer
ALYSJ Joint Venture (Doha Qatar) (Feb 2014 to Jan 2016) Project: - Gold Line Metro Project Phase I
Duties:
Prepare and maintain the different test format for the project inspection, e.g. Tunnel Ventilation Fan, Tunnel Ventilation Damper, Tunnel Booster Fan, Tunnel Ventilation Nozzle, Track Way Exhaust Fan, Pneumatic System Installation Check list, AHU, FCU, Pump, CHW Pipe, Duct, Heat Exchanger check list, Junction box installation, Cable ladder tray installation.
Having the knowledge and Experience in commissioning, all types of Fire Fighting system.
Management of Project Specific Audit and NCR cases and actions utilizing ECS&TVS System.
Maintain and Execute the Project Audit Schedule, and execute other Project or Department as required.
Having the knowledge and Experience in Commissioning, all Types of Mechanical Instrument Cal like AHU, FCU, Heat Exchanger, Pump, Pressure Safety Valve, and Pressure Testing. As per ISO Standard.
Manage and undertake the Work process for Project Specific function and non-conformance reporting. (NCR)
Monitor the effective implementation of appropriate project procedure and provide for updating line during project progression, Monitoring of all project System and processes through audit and review.
Having the Knowledge and Experience in BMS (Building Management Construction)
Knowledge of Civil like Trench for CHW Pipe and Shaft Opening of Concrete Area.
Excavation and Trench work, pipe laying grounding system.
Having Knowledge and experience in PVC and PPR Pipes,
Installation of Fire Hose Cabinet, Implement the QA/QC management system at site
Coordinate with quality inspections with all the site sub-contractors and vendors coordinate all nondestructive testing on site.
Making punch lists before making requests for inspection with consultants / clients etc.
Prepare ITP (Inspection Test Plan) ITP Tracking and IRP Log.
Distribute relevant QA/QC documentation to site subcontractors
Coordinate all the quality site inspections through the site QC inspectors
Review the customer’s specification and undertake relevant training to the site QC inspector.
Final checking after the punch list has been attended and offers the line for inspection by submitting the IRE.
Coordinating with clients / consultants while the inspection is being carried out and offer any clarifications as required.
Monitor hydrostatic test packs for incorporation into as-built dossiers
Consider the implications of delays in QC as-built turnover documentation and bring to the attention of the Sr. QA / QC manager
Develop the Project quality plan, Assist the Project Manager in Implementation the Project Quality Plan, and Developing additional quality related procedure and interface as deemed necessary by the Contract requirement.
All QA/QC Documentation Work
Prepare Method Statement as per Project Specification.
Prepare and Closed NCN (Non-Conformance Notice), FCR (Field Changed Request) And SDR
(Surveillance deficiency Report).
Prepare KPI (Key Performance Indicator)
Having the knowledge and experience of design drawing review, e.g. HVAC, CHW Pipe, AHU, FCU, Firefighting pipe and drainage pipe.
QA/QC Engineer.
KENTZ Engineering and Constructors (June 2013 to Jan 2014) Project: -Sidra medical and Research Center Project (Doha, Qatar) Client: -MCJV (Midmac and Consolidated Contracting Company joint venture)
Duties: -
Tool the QA/QC management system at site.
Having the knowledge and experience of design drawing review, e.g. HVAC, CHW Pipe, AHU, FCU, Firefighting pipe and drainage pipe.
Having the knowledge of commissioning stage prepared documentation, like HVAC, Firefighting pipe. Water supply pipe.
Monitor the implementation of the approved site QC Plan.
To attend the meetings with procurement teams for Material Approval at initial stage of project. In addition, solve the non-conformances issue.
To submit all, approve drawing to site team and QC team and try to build up good coordination with them.
Micro monitoring in report and completion of work, completion of inspection up to commission.
Preparation of as built drawings and attending meeting with representatives of clients/consultants to resolve any non-conformance noted during inspection.
Manage Project Teams from project initiation through to Project completion. Providing leadership to internal project teams and clients, including profit and loss.
Reporting project progress to a project sponsors & senior management. Promoting QHSE compliance at every opportunity.
Coordinating personnel & managing contractors. Promptly escalating any quality or integrity issues.
Identifying project risks and planning with appropriate people to resolve them. Responsible for Project definition, process management, documentation and resource allocation.
Organizes, implement, conduct and ménage the QMS as per Company policy, contract specifications and ISO 9001:2008standard
Implement the QA/QC management system at site
Coordinate with quality inspections with all the site sub contractors and vendors coordinate all non-destructive testing on site.
Making punch lists before making requests for inspection with consultants / clients etc.
Prepare ITP (Inspection Test Plan)
Distribute relevant QA/QC documentation to site subcontractors
Coordinate all the quality site inspections through the site QC inspectors
Ensure all quality control documentation is complied and competed for as-built hand over through the QC turnover engineer
Review the customer’s specification and undertake relevant training to the site QC inspector.
Final checking after the punch list has been attended and offers the line for inspection by submitting the RFI.
Coordinating with clients / consultants while the inspection is being carried out and offer any clarifications as required.
Monitor hydrostatic test packs for incorporation into as-built dossiers
Consider the implications of delays in QC as-built turnover documentation and bring to the attention of the site QC manager
Sr. QA/QC Engineer
Emirates Trading Agency (ETA New Delhi India) (July 2012 to Nov 2013) Project: - Delhi Metro Rail Corporation (DMRC) phase III
Duties:
Prepare and maintain the different test format for the project inspection, e.g. Tunnel Ventilation Fan, Tunnel Ventilation Damper, Tunnel Booster Fan, Tunnel Ventilation Nozzle, Track Way Exhaust Fan, Pneumatic System Installation Check list, AHU, FCU, Pump, CHW Pipe, Duct, Heat Exchanger check list, Junction box installation, Cable ladder tray installation.
Management of Project Specific Audit and NCR cases and actions utilizing ECS&TVS System.
Maintain and Execute the Project Audit Schedule, and execute other Project or Department as required.
Having the knowledge and Experience in Commissioning, all Types of Instrument Calibration like flow Instrument, Pressure Instrument, Level Instrument, Flow Instrument, Control Valve, Pressure Safety Valve, and also Pressure Testing. And Switch Gear, as per ISO Standard.
Manage and undertake the Work process for Project Specific function and non-conformance reporting. (NCR)
Monitor the effective implementation of appropriate project procedure and provide for updating line during project progression, Monitoring of all project System and processes through audit and review.
Having the knowledge and Experience in commissioning, all types of Fire Fighting system.
Having the Knowledge and Experience in BMS (Building Management Construction)
Knowledge of Civil like Trench for CHW Pipe and Shaft Opening of Concrete Area.
Excavation and Trench work, pipe laying grounding system.
Having Knowledge and experience in PVC and PPR Pipes,
Installation of Fire Hose Cabinet, Implement the QA/QC management system at site
Coordinate with quality inspections with all the site sub contractors and vendors coordinate all nondestructive testing on site.
Making punch lists before making requests for inspection with consultants / clients etc.
Prepare ITP (Inspection Test Plan)
Distribute relevant QA/QC documentation to site subcontractors
Coordinate all the quality site inspections through the site QC inspectors
Review the customer’s specification and undertake relevant training to the site QC inspector.
Final checking after the punch list has been attended and offers the line for inspection by submitting the RFI.
Coordinating with clients / consultants while the inspection is being carried out and offer any clarifications as required.
Monitor hydrostatic test packs for incorporation into as-built dossiers
Consider the implications of delays in QC as-built turnover documentation and bring to the attention of the site QC manager
Develop the Project quality plan, Assist the Project Manager in Implementation the Project Quality Plan, and Developing additional quality related procedure and interface as deemed necessary by the Contract requirement.
All QA/QC Documentation Work
QA/QC Engineer
Hyundai Heavy Industries (Abu Dhabi) (July 2009 to June 2012) Project: - Integrated Gas Development (IGD Das Island)
Duties:
Implement the QA/QC management system at site.
Monitor the implementation of the approved site QC Plan.
To attend the meetings with procurement teams for Material Approval at initial stage of project. Moreover, solve the non-conformances issue.
To submit all, approve drawing to site team and QC team and try to build up good coordination with them.
Micro monitoring in report and completion of work, completion of inspection up to commission.
Preparation of as built drawings and attending meeting with representatives of clients/consultants to resolve any non-conformance noted during inspection.
Manage Project Teams from project initiation through to Project completion. Providing leadership to internal project teams and clients, including profit and loss.
Reporting project progress to a project sponsors & senior management. Promoting QHSE compliance at every opportunity.
Coordinating personnel & managing contractors. Promptly escalating any quality or integrity issues.
Identifying project risks and planning with appropriate people to resolve them. Responsible for Project definition, process management, documentation and resource allocation.
Organizes, implement, conduct and ménage the QMS as per Company policy, contract specifications and ISO 9001:2008standard
Implement the QA/QC management system at site
Coordinate with quality inspections with all the site sub contractors and vendors coordinate all non-destructive testing on site.
Making punch lists before making requests for inspection with consultants / clients etc.
Prepare ITP (Inspection Test Plan)
Distribute relevant QA/QC documentation to site subcontractors
Coordinate all the quality site inspections through the site QC inspectors
Ensure all quality control documentation is complied and competed for as-built hand over through the QC turnover engineer
Review the customer’s specification and undertake relevant training to the site QC inspector.
Final checking after the punch list has been attended and offers the line for inspection by submitting the RFI.
Coordinating with clients / consultants while the inspection is being carried out and offer any clarifications as required.
Consider the implications of delays in QC as-built turnover documentation and bring to the attention of the site QC manager
QA/QC Engineer
Home Tech Private limited (Mumbai India) (Aug 2007 to May 2009) Project: - Gujrat Infrastructure finance takes city (GIFT City) B+G 28th floor Story Building
Duties:
Prepare and maintain the different test format for the project inspection, e.g. Installation Check list, AHU, FCU, Pump, CHW Pipe, Duct, Heat Exchanger check list, Junction box installation, Cable tray ladder S installation.
Management of Project Specific Audit and NCR cases and actions utilizing MEP System.
Maintain and Execute the Project Audit Schedule, and execute other Project or Department as required.
Having the knowledge and Experience in Commissioning, all Types of Instrument Calibration like flow Instrument, Pressure Instrument, Level Instrument, Flow Instrument, Control Valve, Pressure Safety Valve, and also Pressure Testing. And Switch Gear, as per ISO Standard.
Manage and undertake the Work process for Project Specific function and non-conformance reporting. (NCR)
Monitor the effective implementation of appropriate project procedure and provide for updating line during project progression, Monitoring of all project System and processes through audit and review.
Having the Knowledge and Experience in BMS (Building Management Construction)
Knowledge of Civil like Trench for CHW Pipe and Shaft Opening of Concrete Area.
Excavation and Trench work, pipe laying grounding system.
Having Knowledge and experience in PVC and PPR Pipes,
Installation of Fire Hose Cabinet, Implement the QA/QC management system at site
Coordinate with quality inspections with all the site sub-contractors and vendors coordinate all nondestructive testing on site.
Making punch lists before making requests for inspection with consultants / clients etc.
Prepare ITP (Inspection Test Plan)
Distribute relevant QA/QC documentation to site subcontractors
Coordinate all the quality site inspections through the site QC inspectors
Review the customer’s specification and undertake relevant training to the site QC inspector.
Final checking after the punch list has been attended and offers the line for inspection by submitting the RFI.
Coordinating with clients / consultants while the inspection is being carried out and offer any clarifications as required.
Monitor hydrostatic test packs for incorporation into as-built dossiers
Consider the implications of delays in QC as-built turnover documentation and bring to the attention of the site QC manager
Develop the Project quality plan, Assist the Project Manager in Implementation the Project Quality Plan, and Developing additional quality related procedure and interface as deemed necessary by the Contract requirement.
All QA/QC Documentation Work
ACADEMIC QUALIFICATIONS
B. Tech in Mechanical Engineering Feb. 2007 with 1st Class from Bangalore University Karnataka, India.
M.B.A Total Quality Management in 2011 with 1st Class from Nagaland University Nagaland Kohima India.
Course – ISO 9001:2015 Quality Management system (QMS) Lead auditor training SOFTWARE SKILLS
Operating Systems: - Aconex, MS Windows 95/98/2000, MS DOS 6.22
Packages: - MS Office 2000, Word, Excel, Photo-shop. PERSONAL DETAILS
MOHAMMAD ASFAR AHMAD
adf5lm@r.postjobfree.com / adf5lm@r.postjobfree.com
Contact Number: +966*********/+917*********
Date of Birth: - 25-10-1985
Passport No: - R8301343
Religion - Islam
Marital Status: - Married
Languages Known: - English, Hindi and Urdu,
(Asfar Ahmad)
Contact this candidate