Resume

Sign in

Piping Designer

Location:
Abu Dhabi, United Arab Emirates
Posted:
September 14, 2020

Contact this candidate

Resume:

Praveen Balan

Abu Dhabi-UAE, Mobile-050-*******

E-mail: adf2qc@r.postjobfree.com

EDUCATION:

Diploma in Mechanical Engineering, Dyaneshwar Vidyapeth (Pune) Mechanical Draughtsman,

SUMMARY:

Designer and Construction Site with over 14. Years of experience in detailed engineering Preparation of Plot plan, Equipment layout, Piping General arrangement drawings, Isometric drawings, piping support drawings. Cooling water system and water injection system and fire water system Drawing and Tie- in Verification, Visit the Site take sketches and Updated in Existing Drawings Based on Project Requirements’ And Project Coordination with Site I have Experience Pipeline Alignment sheet, Pipeline crossing drawing, I have Experience Water purification, wastewater treatment and environmental services. Swimming pool and fountain System and water treatment using Pump filtration system and underground and Above Ground Piping system Design and Pump Room Design Preparing Structural Drawing and Architectural Drawing Mechanical Drawings of Agricultural equipment, Eng. Drawings like Fabrication Detailing And Civil Drawing, and Electrical SLD Drawing

Arc Gis experience Pipeline routing in Arc Gis Software and Generating maps from Arc Gis Data conversion including converting CAD data to GIS, Coordinate system and datum transformations, KMZ creation for use with Google Earth. Software is used:

AutoCAD, Microstation, & Smart Plant P&ID, Smart Sketch, Arc Gis, Microsoft word and Excel Coordinate with Construction site contractor and sub-contractor and office Engineering Design team Support of Site Technicians updating As built Drawing Knowledge Of Mechanical Drawings of Agricultural equipment, Eng. Drawings like Fabrication Detailing, and Civil Drawing And Electrical Drawing Involved Process Department Updating P & ID And PFD Drawings in Smart Plant P&ID, Smart sketch And Auto Cad

Software is used: AutoCAD, Microstation, & Smart Plant P&ID, Smart Sketch, Auto Cad Map Arc Gis, Microsoft Word and Excel and Smart Plant P&ID SIGNIFICANT EXPERIENCE:

ILF Consulting Engineers (Abu Dhabi – UAE)

Dec 2017 to Still Date

Project: Business Continuity Management Study (ADNOC GAS PROCESSING) Responsible for Preparation, Pipeline routing in Arc Gis Software and Generating maps from Arc Gis, Plot Plan,

Praveen Balan (Continued)

Page 2 of 4

Project: Al- Basrah Water Project, Iraq 270 Km Pipe line Responsible for Preparation, Pipe line routing in Arc Gis Software and Generating maps from Arc Gis, Preparing Off take stations Drawings and, Plot Plan, Project: MIRFA PLANT MODIFICATION AND PIPELINE (75 km) (ADNOC Abu Dhabi) Responsible for Preparation, Pipeline routing in Arc Gis Software and Generating maps from Arc Gis, Preparing Alignment sheet, Pipeline crossing drawing, BVS station plot plan and GA

Dolphin Energy LTD (Abu Dhabi)

Through ILF Consulting Engineers (Abu Dhabi – UAE) Responsible for preparation, Plot Plan, Piping GA Piping Isometric’s, Tie-in Isometrics, and Demolition Isometrics Process P&ID

Updating As built Drawing and Preparing Drawing Specification Concorde Corodex Group (Abu Dhabi – UAE)

2017 to NOV 2017

Designer

Water purification, wastewater treatment and environmental services. Swimming pool and fountain System and water treatment using Pump filtration system and underground and Above Ground Piping system Design and Pump Room Design Preparing Structural Drawing and Architectural Drawing Making Quotation for new project And Coordinate with site Fluor Mideast Ltd (Abu Dhabi – UAE)

2007 to 5-JAN-2016

Piping Designer Abu Dhabi Gas Industries Ltd. (GASCO)

. NGIC (Project)

Abu Dhabi, UAE

My responsibilities are Preparing Piping GA and Demolition GA, Plot Plan Tie-in Isometrics, Demolition Isometrics, P&ID And Demolition P&ID. And PFD Piping Designer Abu Dhabi Gas Industries Ltd. (GASCO). Adequacy Check For Habshan Unit 45 Re-

Injection Piping Supports (HRPS

Abu Dhabi, UAE

Adequacy Check For Habshan Unit 45 Re-injection Piping Supports (HRPS) My responsibilities are Preparing Piping Isometric’s, Tie-in Isometrics, Demolition Isometrics, P&ID And Demolition P&ID.

Piping Designer Abu Dhabi Gas Industries Ltd. (GASCO)

. Buhasa Firewater Project

Abu Dhabi, UAE

Praveen Balan (Continued)

Page 3 of 4

Project description: This project intent is to carry out Front End Engineering & Design (FEED) for: Replacement of the existing network with a new carbon steel network along with optimized locations of hydrants, monitors and deluge spray systems.

My responsibilities are Site Survey and to prepare drawings such as Plot Plan, Piping GA and Demolition Isometrics & PID

Piping Designer Abu Dhabi Marine Operating Co. (ADMA) NASR Full Field Development Project

Abu Dhabi, Arabian Gulf, UAE

Fluor is performing front-end engineering for full field development of an offshore oil field that is expected to have an annual average production of 65 MSTBOPD and consists of both Greenfield and Brownfield scopes of work.

Responsible for preparation, Plot Plan, Piping GA Piping Isometric’s, Tie-in Isometrics, and Demolition Isometrics Demolition P&ID

Piping Designer Qatar gas Operating Company Ltd

Common Lean LNG Loading Facilities

Doha, Qatar

FEED and EPCM scopes were performed for the Berth 6 LNG loading facility which included a topsides loading platform module, marine works, a substation/ITR building, a loading header safety system, a corridor, fiber optic cables between existing and new substation/ITR buildings, and a new road from the tank farm to the loading module.

Responsible for preparation of new P&ID's using the Smart Plant P&ID(SPP&D) and updation the same based on Site Comments and Design Changes,

Field Piping Engineer Abu Dhabi Gas Industries Ltd. (GASCO) Habshan Gas Complex Expansion EPCM

Project, Habshan, UAE

An expansion in processing facilities at the GASCO Habshan Gas Complex was required to process the increase of up to 350 MMSCFD in throughput of associated Thammama B gas from the ADCO Bab field, which was to increase its sustainable production to 350,000 BOPD. Performing the walk down inspection for piping parts of Turn Over Packages for piping Completion and prepared Punch. Lists for the correction actions to items not according to the project documents and specifications Updating As built Drawing.

Piping Designer Octal Holding Company

Project Sapphire I & II

Salallah, Oman

For a polyester sheet line of 2*400 TPD capacities, based on Uhde Inventa Fisher technology, Fluor provided consulting and on-site engineering, procurement, and construction management. U/G Piping plans, piping isometrics and cooling water system and water injection system and fire water system using Auto cad

CAD Designer Reliance Petroleum Ltd

Trigon Systems Jamnagar Refinery Complex (Project) 2005 - 2007 MUMBAI, India

Praveen Balan (Continued)

Page 4 of 4

Preparation of piping isometric, Preparation of Piping Routing with respect to site details & GA, Placement of pipe lines, valves, nozzles, couplings and different kinds of fittings As per markup drawings, Extraction of Isometrics drawings from piping models CAD Designer

Reliance Energy (Electrical Utility):

2003 – 2005

Did Conversion of HT &LT Cables, Transformers, and Substation, Receiving Station, Street Lamp Poles, Mini Pillars, and High Tension Towers etc. from Old Record Maps. Data Updating, Plotting, Land base Updation, Captured Building according to ortho photos & Survey data, Create service point with help of connection_id & meters, Tracing HT & LT cables routes through ARC GIS, Tracing HT & LT cables routes through (ARC GIS), CAD Designer

FEED soft

2000 - 2001

Preparation of Isometric, Placement of pipelines, valves, nozzles, couplings and different kinds of fittings As per markup drawings, Process and Instrument Diagrams (P&ID) CAD Executive Chudekar Industries

Chudekar Industries

1998 - 2000 India

Mechanical Drawings of Agricultural equipment, Eng. Drawings like Fabrication Detailing LANGUAGES:

English

Hindi

Malayalam

TRAININGS:

AutoCAD

Microstation

PDS.SP3D

Smart Plant P&ID

Smart Sketch

REVIT – MEP

Arc Gis

PERSONAL DETAILS

Nationality : Indian.

Passport No. : S9817930

Driving License : Valid UAE Driving License



Contact this candidate