CURRICULAM VITAE

KHAWJA TAMJID AUSAF JAN

E-mail:- adf2ca@r.postjobfree.com Mob: +919*********, 979-***-****

Passport no:- L1970151 Skype Id:- tamjidjaan@gmail

Post Applied for: I &C QA/QC Engineer/Inspector.

CAREER OBJECTIVE:

I have 07 years of experience in erection, Pre- Commissioning & Commissioning, Field Inspection and FAT Inspections of various of various electrical and Instrument works in oil & gas, Refinery and petrochemical projects. Experience in Functional logic and Interlock testing, loop testing, Commissioning well versed in The International Standards and Project Specification Inspection and Documentation works. Familiar with AUTOCAD and Plant 3D Simulators.

EDUCATIONAL QUALIFICATION:

Bachelor of Technology in Electronics & Communication Engineering from R.V.S College of Engineering and Technology, Tata Jamshedpur (Affiliated to RANCHI. University, Ranchi, Jharkhand) in 2008-2012.

Intermediate passed from J.A.C Board with Second Division in 2008

Diploma in INDUSTRY SAFETY MANAGEMENT from (N.I.I.T.E) JAMSHEDPUR with First Division in 2005-2006

High School passed from C.B.S.E Board with Second Division in 2004

PROFESSIONAL EXPERIENCE SUMMARY :

Company : AL TOUKHI COMPANY

For Industry, Trading & Contracting (E.P.C).

Position :I&C QA/QC Engineer. Duration :July 2016 to July 2020

Project :Conversion of Hail – 2 CC simple cycle tocombined cycle Power plant, Hail, (Saudi Arabia)

Company : Vemagiri Power Generation Limited (GMR) (388.5 MW) Position :I&C QA/QC Inspector.

Duration : March 2014 to April 2016

Project : Vemagiri Phase-1 combined Cycle Power Plant (Andhra Pradesh) INDIA.

Company : S.S INTERNATIONAL ENERGY PVT LTD, KOLKATA.

Position : I&C Site Engineer

Duration : January 2013 to February 2014

Project : Ankit metal power plant & Manufacturing West Bengal, India

QA/QC Responsibilities:

There, I accomplished the following tasks:

●Responsible for Yokogawa DCS,SCADA and foundation field bus system and Siemens PLC responsible for the witness of ongoing Punch listing clearance prior to MCC completion.

●Programmable Logic Controllers, SCADA Systems and Distributed Control Systems, Industrial Data Communications (incl. Field bus and Industrial Ethernet), Safety Instrumentation and Emergency Shutdown Systems.

●Responsible for the implementation of Quality Control System related electrical and Instrument works accordance with project specification and Engineering Standards. As per project QA/QC plan

●Verify the equipment’s and devices used in the project requirements and meet the Specification as per project requirements, Standards. Tested in accordance with the Procedures.

●Report to QA/QC Engineer and Manager on the day to day basis. As per project QA/QC plan.

●Initiating Proactive Notifications to avoid further complications or violations.

●Initiating Internal NCR’s for all non-Conformances in the project whenever required,As per Schedule.

●Verify all required inspection report and test records are systematically generated and Compiled to the approved QC Procedures

●Preparation of Pre and Post Inspection Documents, review of loop packages obtaining Approval for them from the Clients / Customers.

●Preparation of Inspection Test Plan for Installation and Pre-Commissioning.

●Preparation of Energization Procedure as per Project Specifications.

●Communicate Preparation of Inspection Checklist in accordance with ITP and Project Specifications.

●Prepare System wise packages for final walk through.

●Preparing Exception Item List (Punch List items) for all pending and no-conforming Activities in the project. Supporting Final Hand over of System package.

Site Inspection:

●Review and familiarized the QCP/ITP, P and ID, Hook-up Drawing, Typical drawing details and other drawings related to construction of the project as a guide in performing task in inspections

●Coordinates with Materials Management in the inspection of ordered items/parts deliveries at warehouse upon receipt of Material Receive Report (MRIR)/Delivery Note and ensure delivery is in conformity to the specification. Make necessary rejection report if item/s is off specification.

●Inspection of Instrumentation Systems, DCS/ESD/PLC Installation and functional checking.

●Installation Inspection of Instrumentation Racks and Panels.

●Conduct activities and inspection in accordance to Project Quality Assurance Manual and Quality Control Inspection Plan.

●Perform inspection as per approved ITP & CHECK LIST

●Inspection of instrument installation and calibration as well as functional test of instrument conforms to its data sheet.

●Check Layout and installation/fixing/dressing of multi-core and single pair cables.

●Witness Installation & Testing of Fire Alarm System FM200 in Main Control Room.

●Witness Installation & Testing of Fire Alarm System FM200 in 380 Kv Tunnel.

●Witness/Inspection for Leak Tests of Impulse Lead Piping/Tubing for Pressure, Flow, Level transmitters and Pneumatic lines.

●Inspection of Installation and testing for Fiber Optic Cable, CAT, MI and Communication Cable.

●Installation and Termination Inspection for Terminal Boxes and Instrument Cabinets.

●Inspection of Instrument Loop Checking.

●Installation inspection of All Types of instrument installation, Calibration of pneumatic & Electronic Transmitter FT, PT,LT,TT, Level Troll, interface level troll, thermocouple and RTD checking.

●Inspection and Monitor the Lighting System and Small power panel installation and Testing.

●(Indoor, Outdoor, Aviation, Swimming pool, Street light and Garden lighting. Helipad lighting, Rotating BEACON Light, Wind sock lights).

●Inspection and Monitor the MV,LV Power and Control, Signal, Communication, Fiber Optical cables

(U/G and A/G) Installation, Splicing and Termination.

●Inspection and monitor the Duct bank, Cable trays and Conduit Installation.

●Inspection of Installation and Functional test for Communication System (LAN/Telephone Socket, Telephone Set, Cone Speaker, Horn Speaker, Acoustic Paging Handset, Beacon Lamp and Communication Panel)

●Inspection and Monitoring the Cathodic protection System Installation and Testing(ICCP)

●Witness of Splicing and testing (OTDR) Fiber Optic cable part of quality assurance.

Inspection and Monitor the Industrial drives, MOVs, Fire & Gas system, and Heat tracing system.

●Electric Heat Tracing System Panel Installation, PT, RTD, Junction Box Installation, Heat Tracing Cable Installation and Testing.

●Installation Inspection of instruments as per P&ID.

●Calibration Inspection for Flow, Pressure, Level and Temperature Instruments.

●Installation Inspection of LV, MV Switch Gear, MCC and Control Gear Including Bus Duct.

●Checking the loop folder attachments prior to loop testing.

●Work with project engineers for as built drawings.

●Issuance, review and follow-up of Corrective and Preventive Actions

●Responsible to verify the installation of the instruments by performing inspections as per the Inspection and Test Plan (ITP) and record the findings on the Quality Record (QR).

●Involvement of testing activities for pressure, temperature, flow, level, vibration sensors & transmitters, Control valves, ESD Valves, ON/OFF valves and verifying that it complies with the project specification.

●Responsible for the inspection of installation of Instruments, Conduits and fittings (above and below ground), Cable trays/ladder racks and Cables, Junction Boxes, Control Panels, Consoles, wiring termination, impulse tubing as per the project specification.

●Inspection the process tubing and check that the tubing is done as per the hook up diagram and confirms to the project specification.

●Inspection of Continuity test and Insulation Resistance Test of Various Cables.

●Glanding and Termination Inspection of Various types of cables (Pair cables, Core cables, Patch Cables, OFC etc.

●Inspection of Various Instrument calibration.

●Inspection of Functional Check of Motorized Operated Valves.

●Continuity and Loop Checks Inspection of Various Alarm and Trip Signals.

●Shall coordinate with other discipline Quality control inspectors for ensuring that all other discipline activities that require inspection within the Electrical/Instrumentation construction program have been inspected and approved.

●Involved in local and remote loop checking.

●Involved in Function Test.

●Involved instrument trouble shooting during commissioning.

●Ensure that the loop folder submitted by the contractor contains all the relevant documents needed during the loop check.

●Responsible for troubleshooting the problems occurred in the instruments during commissioning.

●Redlining the drawings, termination schedules, Instrument Loop Diagram (ILD), Datasheets etc., as per the modifications made on site.

●Prepare new Hook up drawings for any modifications and take the approval from the client.

●Issuance, review and follow-up of Non Conformity Reports.

●Issued punch listing for Non-acceptable works.

●Issuance, review and follow-up of Field Change Notification as per Site requirement and taking Approval from client.

●Coordinating with Vendors/Contractors to resolve quality and construction issues.

●Knowledge about Packages also E.C.C (ERECTION-COMPLETION-CERTIFICATE), C.C.C (COMMISSIONING-COMPLETION-CERTIFICATE) & T.O.P (TURN OVER PACKAGE).

Third Party (TPI) / Vendor Inspection (FAT) :

●Familiar with the International industry codes and standards related to intrinsically safe systems and electrical systems for Instrumentation such as; NFPA 70, NEC, NEMA 250, NEMA VE 1, NEMA VE 2,NEMA ICS 6, UL94, IEC 60529,IEEE518, IEEE1100, ANSI MC 96.1, ISA RP12.6, ISA RP 12.2.02

●Involved in FAT Inspection of Motor Control Center (MCC), 480V, 4.16KV and 13.8KV Switch Gear as per the Standards and specifications.(IEC, IEEE, NETA ATS 2009)

●Involved in FAT Inspection of LV, MV Cable testing in Factory as per the Standards and specifications.(IEC, IEEE, NETA ATS 2009).

●

INDUSTRIAL TRAINING DURING BACHELOR OF TECHNOLOGY

●2 Months industrial training in Steel Authority of India (S.A.I.L) .Ltd.,Bokaro, Jharkhand.

●Industry visit of S.A.I.L Bokaro.(Jharkhand).

Project experience Vemagiri Power Generation Limited (GMR).

●Executes the specific inspections on materials, equipment and construction/installation activities on site.

●Issues the relevant Quality Records and, when necessary, writes and sends to QC Supervisor non-conformances reports.

●Checks cable laying and cable identification.

●Performs all relevant loop checks.

●Updates as built drawings.

●Performs punch-listing operations.

●Checks power transformers, switchboard, accumulator battery, sockets outlet, lighting system.

●Performs visual inspections, dimensional test, checks rating and material for connection.

●Performs tests of continuity, insulation resistance.

●Calibrates safety valves.

●Calibrates instruments.

●Checks installation of instruments.

●Performs tests functional instruments.

●Checks pneumatic signal connection.

●Checks fiber optic cable.

●Performs test communication functionalities.

●Verify special processes and the relevant workers’ qualifications.

●Witness the tests, controls and inspections carried out.

●Check conformity with the Quality Control Plan, obtain the relevant documentation, and check procedures and equipment to be used in tests, controls and inspections, manage documents certifying tests, controls and inspections.

Project experience in S.S INTERNATIONAL ENERGY PVT LTD, KOLKATA.

●I can handle all types of work like layout drawing, P&ID,HOOK- UP drawing.

●I can handle all types of demolition & modification job by the help of manpower as per job requirement assign

●I have also maintenance work like preventive maintenance (P.M)job Making daily progress work report

●All the installation drawing, termination drawing.

●Checking of Airline, Impulse-line.

●Work on cable laying or pulling, termination and conducting according to the plant requirement.

●All types of works, which related with Control Room, Dcs (ABB make), and Plc.

●Pre Shut down work, cable continuity Loop checking, magaring.

●Glanding work, Instrument mounting and J.B cable termination.

●Calibration of all types of electronic and pneumatic instrument like LT, PT, FT, TT.

●All types of gauges calibration through the comparator, pneumatic and hydraulic process work done.

●Sov’s servicing work, switches.

●All types of control valve calibration (Marshal Forbes & Mill)

●Experience in maintenance and calibration of temperature, pressure, and flow and level transmitter such as Rosemount, Yokogawa and Honeywell etc.

●Experience in maintenance of all types of temperature elements such as RTD, Thermocouples.

●Working experience in SCADA, TGP, TCP.

●Experience in maintenance work on pneumatic screw compressor like Chicago pneumatic (CP 075), Instrument Air dryer.

●Experience in maintenance of all types of filter like air filters, lubricator oil filter such as (shavo), all NRV’S, Relay’s.

●Experience of turbine vibration check.

PROFESSIONAL SYNOPSIS :

A professional with over 6 years of experience in Construction at Petrochemical, Power-Plant Combined- cycle & Simple Cycle as an QA/QC Engineer – I&C & 1 Years of experience at Power Plant as an Instrument Engineer (Construction & Maintenance)..

Under Product Parameters Width, Thickness, Wedge, Crown, Mechanical properties, etc are measured.

Quality assurance and Quality control by concentrating on Key performance Measures (KPM) like

Rejection trend, Customer complaint in ppm etc.

Adept at mapping client’s requirements, custom designing solutions & troubleshooting for complex Quality related problems.

Possess a clear understanding of the Quality trends with the distinction of instituting quality practices to enhance performance at the lowest overall cost.

An effective communicator with excellent relationship building & interpersonal skills, Strong analytical, problem solving & organizational abilities Possess a flexible & detail oriented attitude.

.

COMPUTER SKILL:

●MS-office complete (words, Excel, power point, Access) MS-window (xp, 7, vista)

, Auto Cade, Dailux.

SKILLS

●I work as a part of a team on Project field Environments, sometimes under great working pressure. Here flexibility and initiative were essential.

●Willing to work in project Sites.

●Creative problem solver with a strong work ethic.

●Current clean Valid Indian Driving License.

●Strong Verbal and written communication skills.

PERSONAL DETAIL:

Father’s Name-KHAWJA TOHID JAN

Date of birth- 10-07-1989

Marital status -Single

Sex-Male

Nationality- Indian

Religion - Islam

Driving License- India

PASSPORT DETAIL:

Passport no.- L1970151

Place of Issue– Ranchi, Jharkhand(India)

Date of issue- 07-10-2013

Date of expiry- 06-10-2023

LANGUAGE:

English, Arabic, Hindi, Urdu.

PROFESSIONAL AMBITION:

I am driven by high degree of aspiration & I am determined to excel in whatever I take charge of, with the virtue of my professional qualification, common sense, good upbringing, hard work, sincerity and above all positive attitude towards life. I believe in integrating my ambition with the corporate goal.

DECLARATION:

I hereby declare that above information given by me is correct and true to the best of my knowledge and I request to consider my CV as per my qualification and experience for the interview on any date as convenient to you. I assure you sir for my best services to my organization.

Date: Signature

Place: Mumbai, (India) (KHAWJA)

Contact this candidate