CHETAN BHILAJI PATIL

CSWIP *.*- Welding Inspector-735167

*, * ****, *********** *****,

Near Ranu Gas Godown.

Ambernath (E) – 421501,

Dist. – Thane.

MOB: -992******* E-MAIL:-adf0sx@r.postjobfree.com

Career Objective

To achieve my goals by achieving organization’s goals with attitude of learning & development, team work & mutual exchange of knowledge.

Area of Expertise

Quality Assurance & Control Code &Standard-API,ASME sec VIII,II,IX,V,AWS D1.1 & B31.3

Project coordination & Expediting Vendor & Site Inspection

Line-Pipe (Pipe Mill) & Pipe-Line (laying) Static & Rotating Equipment

Professional Experience

Current organization:

VCS Quality Services Pvt. Ltd.(Formerly Known as a Velosi Certification Services)

Designation : Lead Inspection Engineer

Duration : March 2015 to till date.

Company profile:It is one of the leading providers of compliance assessment /verification & Consultancy services for hydrocarbon, power infrastructure & marine sectors.

Job Profile & Responsibilities:-

Inspection of Gas compressor, Pump,Valves,EOT Crane, Pressure vessel, Boiler, Heat Exchanger, Column Storage tank,HVAC, Pipeline, linepipe& Process Piping as per QAP, specification, Code & Standard.

To ensure quality of products are exports worthy by using appropriate material, good fabrication standard, suitable welding consumable, qualified welder, destructive & Non-destructive testing.

To carry out inspection of raw material, formed Component,tubesheet, Stage wise assembly & Final inspection during each stage of manufacturing.

Review the Material test certificates, Stage wise inspection report &Final documentation of project.

Review & approves of QAP, ITP, weld plan, WPS, PQR, WPQ & Various job Procedures as per client specification, code & standard.

Line pipe inspection at pipe mill & various types of coating inspection like CWC,3LPP&3LPE etc.

PQT Qualification of Bare pipes, Induction Bend & 3 LPE coating for Linepipe, as per Client specification &API1104.

Inspection during the Route survey & mainline welding Free-tie in, tie in welding, joint coating, Trenching lowering, backfilling, cased crossing, carrier pipe insertion, Horizontal direction drilling (HDD), and cathode protection activities.

Pre – Commissioning & Commissioning Activities for piping system & Pipeline.

Witness of NDT menthod like LPT, UT,MPT& RT film review.

Welder performance qualification as per ASME Sec IX & AWS D1.1.

Inspection of PWHT,Shot Blasting, painting, Holyday Test, Helium leak test.

Witness of Hydrotest, vacuum test & Pneumatic test.

Witness at metallurgical lab for Quality & Quantity test.

Reciprcating, Centrifugal compressor &Pump NLMRT & String test.

GAS compressor Package, gas metering skid performance test & stage wise inspection.

Project coordination & expediting.

Project Details:

A)Offshore:

Project : R- Series 5 Well Head Platforms & Pipeline Project.

Bassein Development 3 Project Well Head Platform & Pipeline & Modification.

Cluster- 8 Development Project- 4 Well Head Platform & Pipeline & Modification.

CPP & LQUP KG-DWN-98/2- Process & Living Quarter Platfrom.

Client: Oil & Natural Gas Corporation (ONGC)

Contractor: M/s National petroleum construction company (NPCC), Abu Dhabi

M/s Larsen & Toubro Ltd, Hazira

M/s Sapura Energy, Malaysia

B)Onshore:

1)In-Plant/ Terminal

Project : LPG Augmentation of Propane & Butane Terminal, Haldia

Client: Indian Oil Petrnas Pvt. Ltd.

Contractor: M/s Fabtech Works & Construction

Successfully completion LPG Augmentation of Propane & Butane Terminal, Construction & erection of various equipment in plant Heat Exchanger, Condenser, pressure vessel & Mounded bullet for storage of LPG, Compressor station, EOT crane, Cooling tower & process piping of plant.

Project : VA & S1 Development, Odalrevu

Client: Oil & Natural Gas Corporation (ONGC)

Contractor: M/s Technip India Pvt. Ltd.

Successfully completion onshore gas terminal plant, carryout procurement item vendor inspection like Vessels, Heat exchanger, valaves, Pumps, Gas compressor package, Gas metering skid, fire fighting equipment etc.at various location in india & Abroad.

Project: Gas metering skid installation & commissioning at BPCL refinery

Client: GAIL (India) Ltd.

2)PipeLine- PipeLaying

Project : NavagumKoyaliPIpeLine

Client: Oil & Natural Gas Corporation (ONGC)

Contractor: M/s Kalpataru Power Transformation Ltd.

85 Km API5L x52M PSL 2 Pipe Laying stage wise inspection & Commissioning carried out at site.

3)Linepipe -Pipe Mill

M/s Welspun Crop –API5L x52M PSL 2 with 3LPE coating (LSAW & ERW pipes)

M/s Maharashtra Seamless Pipies- API5L x46M PSL 2 with 3LPE coating (SMLS & ERW)

M/s Duraline India Pvt. Ltd.- Polyethylene pipe DN 125mm thk 11.4mm PE100, SDR11

Overseas Inspection experience

M/s Emerson Process Management Virgo Valve srl, Italy

M/s National petroleum construction company (NPCC), Abu Dhabi

M/s Sapura Energy, Lumut- Malaysia.

Project-Coordination, Expediting&Procurment item Vendor inspection.

Site & Vendor Inspection coordination & deputation, Monthly project report, Base support Documentation, Inspection release certificates, Documentation control, Invoicing, expedite & resolve the site / vendor inspection issues, Cordination between Client & Project Manager & RCM etc.

Client:- ONGC

1)VA & S1 Development Project, Contractor- M/s Technip India Pvt. Ltd.

2)Gas Compressor Package, Contractor- M/s Tata Project Ltd.

3)NavagumKoyaliPIpeLine, Contractor- M/s Kalpataru Power Transformation Ltd

4)Assam Renewable Project, Contractor- M/s Megha Engineering &Infrastructurer Ltd.

5)Geleki Pipeline Network Project, Contractor- M/s Megha Engineering &Infrastructurer Ltd.

Client:- GAIL

1)Annual rate contract project for maintenance & new installation activity for various location in india.

Organization:

Certification Engineer International Ltd. (Subsidiary of Engineer India Ltd.)

Designation : Surveyor-I

Duration : April 2014 to March 2015

Company profile:A wholly owned subsidiary of Engineer India Ltd., A Govt. of India Undertaking, and Activities related to certification, Re-certification, Safety audit & HSE Management system for offshore& Onshore Oil & Gas facilities. It also undertakes Third Party Inspection of Equipment in Hydrocarbon & other quality sensitive sectors of the Industry.

Job Profile & Responsibilities:-

To carry out Stage wise & Final Inspection of Process equipment as per code & standard.

Review & Approve of QAP, ITP, Weld Plan,WPS,PQR, WPQ & various quality procedures.

Laboratory visit for witness of testing, Visit vendor place to carry out job inspection & Audit.

Project coordination & Expediting with client & contractor to smoothly completion of project.

Prepare Monthly Inspection schedule (MIS) & Invoice of each project on every month.

Project Details:

HPCL Mahul refinery.

Carry out stage wise &Final inspection of 8 nos. of Heat exchanger at vendor place Gujrat.

Chennai petrochemical complex ltd.

Carry out Stage wise &Finalinspection of 7 nos. of heat exchanger, 2 nos. of Columns.

Project Coordinate &Expediting :

BPCL (Mahul, kochi&Numligarhrefinery )ARC Maintenance project.

Avantika Gas Ltd. Indore City Gas distribution Pipeline Project.

Organization:

Larsen & Toubro Ltd., Heavy Equipment Division Powai

Designation : QA/ QC Engineer

Duration : Jan 2013 to April 2014

Company profile:It is a Major Indian multinational in technology, Engineering, Construction, Manufacturing & Financial services with global operations. L&T Heavy Engineering manufactures & supplies custom designed equipment to critical process industries such as fertilizer, chemical, refinery, petrochemical and oil & gas, as well as to sector such as nuclear power aerospace & defence.

Job Profile & Responsibilities:-

Manufacturing of Pressure vessel, Boiler, Heat Exchanger, Column Storage tank & Process Piping as per QAP, specification, Code & Standard.

To ensure quality of products are exports worthy by using appropriate material, good fabrication standard, suitable welding consumable, qualified welder, destructive & Non-destructive testing.

To carry out inspection of raw material, formed Component,tubesheet, Stage wise assembly & Final inspection during each stage of manufacturing.

Witness of LPT, UT,MPT& RT film review.

Review the Material test certificates.

Welder performance qualification.

Inspection of PWHT, Shot Blasting, painting, Holyday Test, Helium leak test, Hydrotest& Pneumatic test.

Project Details:

Successfully completion ASME Code Stamp audit & Shop approval for Manufacturing of U, U2 & R Code stamp.

Manufacturing of equipment for following reputed client.

16 nos. of Screw Plug type Heat exchanger for Petrobras Brazil refinery,

Piping Spool for Heaurty Petrochem Rassuia,

2 Nos.waste heat Boiler for TechnicasReudinas.

12 nos. of Vessel & Column for Reliance Jamnagar 3 project.

Organization:

Bureau Veritas India Pvt. Ltd.

Designation : Mechanical Inspection Engineer

Duration : June 2012 to Jan 2013

Company profile: Activities related to certification, Re-certification, Safety audit & HSE Management system for offshore& Onshore Oil & Gas facilities. It also undertakes Third Party Inspection of Equipment in Hydrocarbon & other quality sensitive sectors of the Industry

Job Profile & Responsibilities:-

To carry out Inspection ofScrew Plug type Heat echnger at L&T HED Powai for client Petrobras brazil.

Organization:

Expo Gas Container Ltd.Murbad

Designation : Engineer

Duration : Feb 2011 to May 2012

Company profile:Manufacture a wide range of process plant equipment such as coded pressure vessel, Deaerator, Distillation Columns, Tower, Reactor, Heat Exchanger etc. Also take Trunkey project to construct fixed & floating roof Tanks, Mounded Storage Tank, Cross country & In-Plant Piping.

Job Profile & Responsibilities:-

Manufacturing of Pressure vessel, Boiler, Heat Exchanger, Column Storage tank & Process Piping as per QAP, specification, Code & Standard.

Project Planning & Weekly Production progress report to head office.

Prepare Material Requirement for project as per bill of material & Drawing.

Projects coordinate with Client & submit the job status& schedule to client.

Prepare material cutting layout, Drawing distribution & maintaining record.

Educational Qualifications

Bachelor of Production Engineering (Mechanical) Passed with Distinction in May 2010 from Mumbai University

Intership : Godrej &Boyce Mfg. Ltd.Vikhroli (6 Months In-Plant Trainee)

Project Title : Design & Manufacturing of Fixture & Process Line for Marine door.

Certifications: CSWIP 3.1- Welding Inspector, ID no.- 735167

Level II in RT, UT, LPT, MPT as per ASNT-TC-1A Ed. 2006.

Computer Skill

Basic Auto-CAD Knowledge

MS-Office, MS-Outlook& MS-Project

Baan & ERP.

Knowledge of Windows XP & Internet

Personal Information

Name : Chetan BhilajiPatil

Date of Birth : 08thSep 1987

Sex : Male

Hobbies : Cricket, Swimming, Play Guitar & Book Reading

Languages known : English, Marathi, Hindi.

Passport Number : K4821528

DECLARATION

I hereby declare that the above-mentioned information is correct up to my knowledge and I bear the responsibility for the correctness of the above-mentioned particulars.

Date: -

Place: -

(ChetanBhlaji Patil)

Contact this candidate