Mechanical Maintenance
Resume:
EXPERIENCE SKILLS **+
YEARS
**+
YEARS
**+
YEARS
4+
YEARS
Hydraulic systems Experian’s in lifting systems. * Pneumatic valves, lines, cylinders and fault finding. * Installation and commissioning of the heavy equipment. * Conducting tests & inspections to ensure operational effectiveness of plant & utilities.
*
Reviewing engineering drawings, layouts, diagrams, technical specifications, cost estimates for erection.
*
Commissioning of the plant; carrying out overhauling work of equipment, modifications, and major repairs to improve equipment efficiency by fault-finding.
*
Planning and effectuating predictive & preventive maintenance schedules for various equipment / lines to increase machine up time & equipment reliability.
*
Implementing maintenance schedules and carrying out periodic checks to ensure performance of various equipment and maintaining requisite documents for the same.
*
Identifying areas of obstruction / breakdowns and taking steps to rectify the equipment through application of troubleshooting tools.
*
Maintaining of machinery, stage lifts, drives, gearboxes, extractor fans, v-belts and chains.
*
Manufacturing of steel profiles, gates and partitions. * Overhauling of boggy wheels. *
Building sites for Plessey, Telkom, MTN and Cell C. * CURRICULUM
VITAE
*********@*****.***
https://www.linkedin.com/in/
riaan-van-dyk-b20a16164
RIAAN
VAN DYK
.
Trade qualified
Section 13
Mechanical Fitter
with Red Seal Artisan.
PROFESSIONAL PROFILE:
With this I would like to introduce myself:
My full names are Riaan van Dyk, a male who is 45 years of age. I am a South African citizen with ID no: 740-***-**** 089 With a valid driver’s licence EB and own vehicle I am staying in the Moot area of Pretoria but are willing to travel.
I am a hard- working, motivated and enthusiastic Mechanical Fitter with a proven track record. I am accustomed to working in a challenging and fast-paced environment, particularly when dealing with multiple projects and priorities at the same time.
PERSONALITY TRAITS
• OBLIGATED
• DEVOTED
• LOYAL
• TRUSTWORTHY
• TACTFULL
• HARD WORKING
• PRESENTABLE
• QUICK THINKER
• LEADING SKILLS
• RELIABLE
• EXCELLENT HEALTH
• PROBLEM SOLVER
• COMMUNICATOR
• POSITIVE MIND SET
• IMPLEMENTING
SYSTEMS
• PUNCTIAL
• AMBITIUS
• PROFESSIONAL
• INNOVATIVE
• PUNCTUAL
• WORK UNDER
PRESSURE
Installations of antennas, feeder cables and connecters, grid antennas, dishes, safety slings.
*
Installations of radio links, air conditioners. *
Civil work on sites, excavation, cast of aprons, fencing and electrical fencing.
*
Installation of conveyors, silo, pipes repairing and overhauling of diaphragm pumps.
*
Installing and overhauling of interlocks, auger, bearings and bearing blocks.
*
Repair of flywheel and Die pressing machines, bud welders, spot welders.
*
Working with bending machines, compressors and building of cooling tower.
*
Overhaul centrifugal pumps and plumbing. *
Overhaul and repair overhead cranes. *
Maintaining and repairing FMCG Machines. *
Maintaining and repairing corrugated line consisting of conveyers. * Replacing of Sump pumps. *
Manage of lifting and rigging equipment. *
Replace and align gearboxes with V Belt and chain drives. * Inspecting, fixing and replacing of hoists. *
Repair, maintain and lubricating mould assemblies. * Installations of new machines in factory. *
Monitor temperatures of scalding tanks and chlorine water system. * Overhead lines, shackles and corner wheels repair and maintenance. * Overhead lines, shackles and corner wheels repair and maintenance. * Attending of breakdowns during production in minimal downtime. * QUALIFICATION 1
Matric (Grade 12)
High School
Elandspoort
1992
AFRIKAANS
ENGLISH
MATHEMATICS
SCIENCE
ACCOUNTING
METAL WORK
QUALIFICATION 2
Section 13
Mechanical Fitter
Trade Qualified
Iscor
1996
Red Seal
Qualification
Certification and Training
• Forklift license NQF Level 3 – Lifting Machinery Code F01-03
• Operating Overhead Crane license NQF Level 2
• Lifting Machinery Code C30 & C31
• Health and Safety Representative
SOFTWARE KNOWLEDGE
1. MICROSOFT OFFICE
2. SAP
3. InforLN
4. ZETA
WORK EXPERIENCE #8
Festive a division of Astral South-Africa
June 2015- Currently
(Mechanical shift fitter)
• Attending of breakdowns during production,
minimizing downtime.
• Installations of new machines in factory.
• Working on easy load automatic hydraulic
loading lift system as well as electrical fault
finding on machine.
• Water Pumps maintenance and overhauling.
• Monitor temperatures of scalding tanks and
chlorine water system.
Repair and maintenance overhead lines,
shackles and corner wheels.
• Installation of Plastic chain conveyors,
sprockets, bearing, motor and gearboxes.
REFERENCE: NICO OELOFSE – 082-***-****
WORK EXPERIENCE #7
Bridgestone South Africa
August 2014 - February 2015
(Maintenance fitter)
Truck mould assembly.
Passenger vehicle mould assembly.
Stripping mould assemblies change to different
sizes as per request on tire sizes.
Repair, maintain and lubricating mould
assemblies.
Do size changes on machines with whole setup
of machine to specific size.
Programming of machines to correct curing
code.
Maintaining tire presses which includes hydraulic oil leaks, pneumatic air leaks and steam.
Do gas checks for gas leaks and replace of gas
pipes.
Changing of bladders to correct sizes.
Insure correct mould numbers are send through
to planning.
WORK EXPERIENCE #6
SC Johnson South Africa
July 2012-August 2014
(Maintenance fitter)
Overhauling of check weight load cell and
equipment.
Installing and testing of load cells for
calibration.
Installing of chemical flow meter.
Responsible for weight adjustment on
machines.
Monthly checks of gas equipment B62 and B36
gas lines and gas valves.
Adjusting of gas volumes on gas filling
machine for correct weight.
Adjusting of aerosol product filling machine
for correct weight.
Adjusting of liquid product filling machine for
correct weight.
Maintaining of all filling machines.
Maintaining of an aerosol line on environment
health and safety standards.
Scheduled planned maintenance and ordering
spares.
Overhauling of diaphragm pumps and
centrifugal pumps.
Pneumatic systems fault finding.
Installing of new pneumatic lines.
WORK EXPERIENCE #5
Saint Gobain South Africa
July 2007 - April 2012
(Engineering fitter)
Load test on overhead cranes and electrical hoists
Manage of lifting and rigging equipment
Replacing of water pipes & hydraulic pipes
Repairing of hydraulic & pneumatic cylinders
Replace of bearings
Replace and align gearboxes with V Belt and chain drives
Responsible for daily inspection of cooling towers
& centrifugal pumps
Responsible for inspections of slat conveyors and rollers
Repairing of slat conveyors bearings and
gearboxes
Involved of installing and aligning of new Disa line
Installed new water pneumatic & hydraulic lines
Replacing of Sump pumps
Repairing of overhead cranes steel rope wires
Inspecting, fixing and replacing of hoists
WORK EXPERIENCE #4
Nampak Packaging
October 2003-June 2007
(Shift fitter)
Maintaining and repairing FMCG Machines
Die cutting machines.
High speed folding.
Printing, stapling and gluing machines.
Installing double stitching machine pneumatic
lines.
Limit switches.
Censoring switches.
Planning maintenance and shut down time
ordering spares.
Overhauling diaphragm pumps.
Fault finding on pneumatic lines.
Maintaining and repairing corrugated line
consisting of conveyers.
WORK EXPERIENCE #3
Martoni Industrial Engineering
September 2002-May 2003
(Shift fitter)
Maintaining of load cell equipment in
calibration of load cells.
Maintaining, repairing and setting of FMCG
Machines, heat shrinking and sealing machines.
Fault findings on pneumatic systems.
Installation of conveyors, silo, pipes repairing and overhauling of diaphragm pumps.
Installing and overhauling of interlocks, auger, bearings and bearing blocks.
Repair of flywheel and Die pressing machines,
bud welders, spot welders.
Working with bending machines, compressors
and building of cooling tower.
Overhaul centrifugal pumps and plumbing.
Overhaul and repair overhead cranes.
WORK EXPERIENCE #2
Hi-Tech Telly installations CCs
November 2000-August 2002
(Contract supervisor)
Building of telly communication sites and
maintaining of sites for MTN and Cell C
Building DR mast sites for Plessey and Telkom
Installations of antennas, feeder cables and
connecters, grid antennas, dishes, safety slings
Installations of radio links, air conditioners
Civil work on sites, excavation, cast of aprons, fencing and electrical fencing
WORK EXPERIENCE #1
Pretoria State Theatre
June 1996 - August 2000
(Senior Maintenance Fitter)
Load test of décor battens
Knowledge of stage equipment
Overhauling of boggy wheels
Replacing of stage equipment steel cables
Maintaining of machinery, stage lifts, drives,
gearboxes, extractor fans, v-belts, chains
Maintaining of steel
Additional repair work in the building
Manufacturing of steel profiles, gates and
partitions
To Whom it may concern:
Trade qualified section 13 Mechanical technician specializing in Industrial Mechanical engineering with basic knowledge of electrical systems and programmable logical controllers. I have worked in the FMCG industry for the 15 years where my duties consisted of fault finding plant maintains and continues plant upgrades.
In that time, I have gained experience on different types of conveyor systems, pumps and pneumatic systems. This is what I will bring to my future employer a willingness to adapt, experience and a can do no quit attitude.
Thanking you in advance for your kind consideration.
Contact this candidate