EXPERIENCE

DATES FROM MARCH ****– TO CURRENT

SENIOR PROJECT ASSOCIATE, UAV LAB AEROSPACE DEPARTMENT IIT KANPUR Flying of different model of uav’s, Design and development of uav’s according to project requirements, Proposal writing for uav’s, flight planning, autopilot system integration, development of black box for uav, development of sensors like alpha beta sensor, load cell integration, Iot based solutions, development of ground control station and thrust bench and simulator, designing and manufacturing of foam and composite material based models of uav’s. beside these I have to deal with the different vendors and finalize the procurement either by tendering or direct procurement of machine and equipment's. Doing market research regarding equipment's for various projects. DATES FROM 31TH JAN 2020– FEB 2020

UAV PILOT, AARAV UNMANNED SYSTEM BANGLORE

Uav fw and rotary wing piloting, mapping and data acquisition for different sites DATES FROM JAN 2019 - JAN 2020

UAV PROJECT LEAD, FLYX AEROSPACE PVT LTD

Fabrication,simulation,flight testing of fixed-wing, multirotors, hybrid uavs. VIKASH KUMAR

Address- Room no 151, Ra tower, IIT Kanpur, Uttar Pradesh, 208016 Phone- 790-***-****

Email- adezfd@r.postjobfree.com

LinkedIn Profile- https://www.linkedin.com/in/vikash-kumar-38289a19a/ I am a mechanical engineer and I’m very passionate about mechatronics and uav’s. I have hands on experience with projects like autonomous ground vehicles, Surveillance robotic vehicle, Autonomous uav’s and aerial servillance uav’s, Payload delivery uav’s, Special application uav’s for fixed missions like medical and critical delivery to remote locations, Thermal inspection uav’s, Special uav’s for disaster management consisting of multirotor, Fixed wing and vtol configuration with full functional ground control system which includes 30 km data link and 15 km video link and secondary video link which operate using 4g network and tracking system. Apart from that I’m currently working on tranquliser multi rotor uav, swarm of uav which can do multiple task according to mission requirements. I’m in development of stealth uav “aura” at IIT Kanpur. I have experience with different flight controller's which include Pixhawk, cc3d, APM, naza, pixhawk cube, Pixhawk mini, Pixhawk 4, Pixhawk v5. I have made a mini custom flight controller with atmega328 ic board and it can control multirotor smoothly and I’m working on it to expand its capabilities. I have developed transmitter receiver with microcontroller and nrf modules which can give a range of 1 km. I have worked on projects which which demands knowledge of mechanical, electronics, embeded electronics, programming with c, robotics, radio signals, design analysis using fusion 360 software, 3d mapping and processing, autopilot setup, flight planning and execution, aerial mapping, Setup and manufacturing of ground control station for uavs, composite material model manufacturing, flight laws, pre flight checks. I have eager to contribute to all phases of product development cycles. 2

DATES FROM JUNE 2018 - AUG 2018

INTERNSHIP, INDIAN RAILWAYS NEW DELHI

Attached with indian railway new delhi coach care centre under maintenance wing of satabdi express line.

Routine testing of the satabdi coaches which includes electronics,hvac,hydraulics and mechanical components under very fixed time.

Rapid repair or replace of defective equipment and restore functionality. EDUCATION

2019

BACHELOR OF TECHNOLOGY [MECHANICAL ENGINEERING], KCC INSTITUTE OF TECHNOLOGY AND MANAGEMENT, APJ ABDUL KALAM TECHNICAL UNIVERSITY 73%, I was mainly focused on mechatronics with a major interest in uavs design and development 2015

INTERMEDIATE,BIHAR STATE BOARD

70% in PCM

2012

MATRICULATION, RPS RESIDENTIAL SCHOOL PATNA CBSE

8.8 CGPA

SKILLS

PROPOSAL WRITING

PRESENTATION AND LECTURE DELIVERY.

MARKET RESEARCH

TENDERING AND PROCUREMENT IN GOVT AND

PRIVATE SECTOR.

CONTRACT NEGOTIATION

UAV TROUBLESHOOTING AND MAINTENANCE

CLIENT PRESENTATION

AUTOPILOT TESTING AND INTEGRATION

COMPOSITE MATERIAL MANUFACTURING

DESIGN AND DEVELOPMENT OF UGV

SOLUTIONS ACCORDING TO NEED OF CLIENT.

DESIGN OF STRUCTURE AND ELECTRONICS IN

FUSION 360

PROGRAMMING OF ALL FLIGHT CONTROLLER

UAVS DESIGNING, FABRICATION,FLIGHT

TESTING

FLYING FIXEDWING AND MULTIROTOR AND

HYBRID WITH AND WITHOUT AUTOPILOT.

DESIGN AND FABRICATION OF AUTOPILOT

SYSTEM FOR FIXED AND ROTARY WING.

AVIONICS INTEGRATION AND TROUBLE

SHOOTING

DATA AQUATION AND PROCESSING

SURVEY AND MAPPING

DEVELOPMENT OF UAV IN A SGHORT

PERIOD OF TIME WITH CLIENT NEEDS.

ROBOTICS AND IOT PROJECTS

DEVELOPMENT USING AUDRINO ESP 32

RASBERRY PI AND NODE MCU

PROGRAMMING IN C

3

CERTIFICATIONS

ADVANCED AERIAL MAPPING BY BETTER

DRONES

DESIGN OF FIXED WING UAVBY IIT KANPUR

INDIAN RAILWAY INDUSTRIAL TRAINING

AUTODESK AUTOCAD AND FUSION 360

CERTIFIED USER

UAV DEVELOPMENT AND TESTING BY IIT

DELHI ROBOSAPIAN TECHNOLOGY

DRONE DEVELOPMENT AND

PERFORMANCE ANALYSIS BY IILM

INSTITUTE

BEST WORKSHOP COORDINATOR BY

TECHNOXIAN TECHNOLOGIES

PROJECTS

INCLUDES DESIGN OF AIRFRAME AND TEMPLATES, FOAM AIRFRAME PARTS CUTTING AND MANUFACTURING AND 3D PRINTING OF RELEVANT PARTS. THE AVIONICS ARE IMPORTED. The INTEGRATION AND TUNING ARE DONE BY US. THE AIR FRAME WAS CONVERTED TO COMPOSITE MATERIAL[CARBON FIBRE AND FIBRE GLASS] ACCORDING TO NEED OF THE PROJECT. 1. BASIC RACING QUAD AND HEXA MULTIROTOR

USING NAZA LITE, CC3D,OPENPILOT AND

MAMBA F7

2. AMBULANCE DRONE USING PIXHAWK WITH A

CONNECTIVITY OF UPTO 5 KM CIRCLE AND IT

WAS CAPABLE OF LIVE VIDEO CONNECTIVITY

USING 4G NETWORK. THE CONTROLS WAS

WITH TELEMETRY AND OVER 4G NETWORK.

3. SERVILLANCE POLICE QUADCOPTER INSPIRED BY

DJI INSPIRE WITH OWN DESIGNED FRAME AND

WITH LOUNSPEASKER AND FLASH LIGHT. THE

VIDEO WAS LIVE WITH FPV CAMERA AS WELL

AS 4G CAMERA TO THE POLICE CONTROL CAR.

ENDURANCE WAS 30 MIN. THIS WAS USED IN

COVID 19 SERVILLANCE.

4. TRANQUILISER DRONE FOR ANTISOCIAL PERSON

IN ANY PUBLIC PLACE AND CONTROLLING THE

WILD ANIMALS.- PROJECT BY SERB INDIA

5. MANNUAL CONTROL FIXED WING UAV OF

1.2 METRE WING SPAN AS TRAINER THREE

MODELS

6. AUTONOMOUS FIXED WING UAV USING

FIXED WING 1.3 METER WING SPAN USING

PIXHAWK AND MAYATECH MT 900AND

FLYSKY TRANSMITTER RECIEVER WITH

TURBOWINGRY 2.4.

7. AUTONOMOUS FLYING WING UAV WITH

HIGH ANGLE OF ATTACK USING PIXHAWK

CUBE AUTOPILOT WITH A MAPPING

CAMERA AND FPV SETUP OF HERELINK.

8. AUTONOMOUS HYBRID VTOL FIXED WING

UAV OF 2M WING SPAN WITH PIXHAWK V5

AND RFD 900 AND FOXTECH VDC .

9. DESIGN AND DEVELOPMENT OF STEALTH

UAV AURA- A PROJECT OF AERONAUTICAL

DEVELOPMENT AGENCY INDIA

Contact this candidate