RESUME
Name : Prosualde R. Ellorimo
Address : Mabini, Bohol, Philippines, 6313
Contact Number : +639********* /+639*********
E-mail Address : adex5w@r.postjobfree.com
Passport Number : EC2253560
Personal Data
Age : 31
Date of Birth : 08 August 1988
Place of Birth : Mabini, Bohol, Philippines
Gender : Male
Civil Status : Married
Height : 5 feet and 4 inch
Weight : 65 kilogram
Educational Background
Tertiary
Degree : Bachelor of Science in Computer Engineering
(Undergraduate)
School : Holy Name University
Period : June 2005 to October 2007
Secondary
Degree : 4 Year Secondary Graduate
School : Santa Monica Institute
Period : June 2001 to March 2005
Special Skills: Well experienced in special lifting operation like critical lifting, heavy lifting, tandem lifting and installation of sensitive parts.
Employment History
Company : BNG (B) SDN. BHD.
Position :Rigger/ERECTOR
Industry : Industrial
Duration : April 18, 2017 to Nov.30, 2019
Location : Brunie
Manager / Supervisor : Lee Min Soo
Duties and Responsibilities
1.Develop and/or assist in the development of lift plans
2.Review approved lift plans, diagrams and related documents
3.Select rigging equipment and accessories according to approved lift plans
4.Perform pre use inspection of rigging equipment and accessories
5.Move parts into position, manually or by using hoists or cranes.
6.Confirm the weights, dimensions and heights of all loads to be lifted
7.Perform Housekeeping activities as required
8.Perform all other related job functions as required.
Employment History
Company : PT. SAIPEM INDONESIA KARIMUN BRANCH
Position :Rigger
Industry :Oil & Gas
Duration : September 8, 2016 to Dec.25, 2016
Location : Indonesia
Manager / Supervisor :Mr. Nanang Harry Christiawan
Duties and Responsibilities
1.Specializes in the lifting/moving different types of valves and heavy pipes and equipment.
2.Conduct visual inspection of lifting gears and equipments prior to use ensuring that they are in good condition.
3.Ensure the slings are safely placed on the equipment to be lifted and that the slings are loaded onto the crane’s hooking correctly.
4.Directs the crane operator by either radio or hand signals to advice him when the load can be lifted and moved.
5.Work on uneven grounds and are constantly looking overhead watching the cranes hook.
6.Dismantle and store rigging equipment after use.
7.Manual handling of slings and lifting equipment
8.Control movement of pipes through narrow spaces
9.Attach loads to rigging to provide support or prepare them for moving.
10.Loading and unloading of materials from lay down yard.
Company :JGC/NIPPON EXPRESS/PETRONAS TRAIN 9 PROJECT
Position :Rigger
Industry :Oil & Gas (LNG)
Duration :January 28, 2015 to Dec.25,2015
Location :Malaysia
Manager / Supervisor :Mr. Saito
Duties and Responsibilities
1.Installation and assembly of overhead crane.
2.Lifting of overhead crane rail to its proper position, fitting and welding, and preparation for the installation of overhead crane.
3.Installation of overhead Crane using crawler Crane or mobile Crane.
4.Operating of overhead Crane.
5.Lifting of Counter weights for load testing weighing up to 100 tons.
6.Installation of valves, pipes using Crane, chain blocks, web sling and shackle.
7.Giving proper hand signal and radio signal to Crane Operator.
8.Howling of materials from lay down yard.
9.Erection of structural member like beam, girder, bracing, channel, handrail and gratings.
10.Fixing of structural beams, columns and girders using drifter, hammer and rattle gun.
11.Studies carefully objects to be moved, estimates their shape, size, and weight and chooses lifting devices accordingly.
Company :BECHTEL/DOOSAN/GENERAL ELECTRIC COMPANY OF LIBYA
Position :Rigger/Erector
Industry :Power Plant
Duration :January 28, 2014 To June 10, 2014
Location :Libya
Manager / Supervisor :Mr. Han
Duties and Responsibilities
1.Specialize on Boiler Making.
2.Preparation of erecting panel board using a lot rigging tools such as winch machine, chain pulleys, chain blocks and crane.
3.Loading and unloading panel board.
4.Loading and unloading of structural material beam, column, bracing, handrail and gratings
5.Segregation of structural member in right position gridline by gridline
6.Lifting module over 30 meters height.
7.Preparation of tools for assembly for erection and use the right tools for the right job
8.Erection of structural member like beam, girder, bracing, channel, handrail and gratings
9.Assembling of frame structural bent by bent and check the sequences if its align by using measuring tape, and use lever block, chain block, sling and shackle for alignment
10.Fixing structural beams, columns and girders using drifter, hammer and rattle gun
11.Read specifications to determine the locations, quantities or sizes of material required
12.Used crane and man lift for placing and fixing the steel beams
13.Used rattle gun and torque wrench for tightening the bolt
14.Put markings on a tightened bolt
15.Calculating of hitch capacity, sling selection and hand signal
16.Experienced in critical and specialized lifts, guide loads into positions as they are lowered when necessary, used hand signals and two way radio
17.Studies carefully objects to be moved, estimates their shape, size, and weight and chooses lifting devices accordingly
18.Attaches lifting devices using clamps, hooks, bolts, knots, etc.
19.Carries out all activities in a safe and diligent manner with all proper PPE.
Company : SAMSUNG C&T/DAEAH E&C/QUARRAYAH INDEPENDENT
POWER PLANT
Position : Rigger / Erector
Industry : Power Plant
Duration : March 21, 2012 to March 12, 2013
Location : Saudi Arabia
Manager / Supervisor : Mr. Kim Ilyong
Duties and Responsibilities
1.Daily Tool Box Talk before start lifting operation.
2.Coordinate to Lifting Supervisor and Material Controller from day to day rigging activities in our assigned task.
3.Coordinate to foreman before and after the lifting operation.
4.Prepare rigging equipment for lifting jobs such as shackles, slings & other related lifting equipment’s for incoming & outgoing materials.
5.Perform other jobs assigned to by immediate superior.
6.Responsible maintain proper signals in actual lifting engaged in hoisting and moving loads to ensure safety of workers and material handled, using hand signals or two-way Radio.
7.Always wear safety protection (PPE) in job site.
8.Keep work place orderly safe and clean.
9.Segregate the scrap metals, waste, contaminated materials.
10.Maintain the cleanliness and refueling the crane, and housekeeping duties in the area.
11.Never enter area having a noticeable hazard involved.
12.Obtain approval before entering or operating with unsafe or defective operational and safety gadgets.
13.Take extra precaution/barrier before proceeding with work designated as restricted.
14.Report abnormal condition of materials and equipment used.
Company : KENTZ E&C/AMBATOVY NICKEL AND COBALT MINING
Position : Rigger
Industry : Mining
Duration : September 29, 2010 to September 25, 2011
Location : Madagascar, Africa
Manager / Supervisor : Colin Long
Duties and Responsibilities
1.Assigned in area 7700 cobalt refinery to erect over 4000 MT of steel works. This includes pipe rack, process and equipment structure.
2.Loading and Unloading of Pipe.
3.Responsible for constructing equipment.
4.Being aware of the wing speed and direction.
5.Howling of materials from lay down yard
6.Preparation of tools for assembly for erection and use the right tools for the right job
7.Read specifications to determine the locations, quantities or sizes of material required
8.Calculating of hitch capacity, sling selection and hand signal
9.Experienced in critical and specialized lifts, guide loads into positions as they are lowered when necessary, used hand signals and two way radio
10.Studies carefully objects to be moved, estimates their shape, size, and weight and chooses lifting devices accordingly
11.Attaches lifting devices using clamps, hooks, bolts, knots, etc.
12.Carries out all activities in a safe and diligent manner with all proper PPE’s
Trainings attended
Rigger Training (CIDB)
Registration number : ASIA/SW/RS/15/1038
March 21, 2015 – March 21,,2017
Rigger Training (NC1)
Registration number : 631717CON008
DEC 2019-DEC 2024
Construction Safety and Health Training (COSH) (COSHEMAP) Oct 13 – Oct 17, 2014
WORKING AT HEIGHT
JGC/PETRONAS
LNG Project
Malaysia
January 2015