Electrical Power Plant
Resume:
JEAVE D. DEMA-ALA
Site Supervisor
CONTACT
*******@*****.***
Room 41, Villa no. 4, 29 St. Muroor
Abu Dhabi
PERSONAL INFORMATION
Birth date: May 28, 1982
Gender: Male
Civil status: Married
Nationality: Filipino
Religion: Roman Catholic
Height: 5’5”
Weight: 138 lbs.
EDUCATION
Undergraduate in Bachelor of Science in Electrical Engineering at Technological University of the Philippines
(TUP - Visayas) Talisay City Negros Occidental on year 1999
– 2001, and graduated in Practical Electricity Vocational Course at North Negros College Cadiz City Negros
Occidental on year 2001 – 2002.
CAREER OBJECTIVE
Efficiently and competently involved in a dynamic company operation where I can share my Knowledge, skills and abilities for the continuous growth, success and development of the Company and my career.
QUALIFICATION and SUMMARY
Over ten (10) years experienced in Technical works in the Philippines and two (2) years in Engineering
Construction especially in Electrical & Instrument works and other related activities in the Kingdom of Saudi Arabia and another five (5) years in Facilities Management in Abu Dhabi Airports Company UAE.
Hard-working, conscientious, and intelligent worker interested in international employment as a Site
Supervisor.
Extremely skilled in planning and execution of special projects in time-critical environments.
Extensive knowledge in directing, coordinating and exercising authority for planning, organization,
control and completion of projects.
Conducted critical inspections on site and provided reports detailing issues found.
Very skilled at solving customer relations issues by seeking first to understand and then to be understood.
Effectively able to communicate with customers,
contractors and management.
WORK EXPERIENCES
ENOVA FACILITIES MANAGEMENT
PO Box: 93252 1st Floor – Plaza 30, Bldg. No. 80 (9B), Al Nahyan Commercial Complex, Delma Street, Abu Dhabi United Arab Emirates
Designation: Senior Supervisor
From: August 21, 2019 – To present
Project: Al Bateen Executive Airport
Campaign Facilities Management LLC
P.O. Box 45662 Abu Dhabi, UAE
Designation: Site Supervisor
From: June 1, 2017 – June 22, 2019
Project: Al Bateen Executive Airport
ENOVA FACILITIES MANAGEMENT
P.O. Box 93252; Near Ali & Sons, Abu Dhabi,
United Arab Emirates
Designation: Lead Man
From: July 21, 2015 – May 31, 2017
Project: Al Bateen Executive Airport
DUTIES AND RESPONSIBILITIES
Handling and Lead the people well for the smooth flow leading to organization goal.
Understand and Interpret Electrical Plan lay-out, single line diagram and control circuit diagram.
Updating of drawing’s and layout of MEP through AutoCAD
Conduct inspection of airside maneuvering, apron and service road.
Supervise and monitor every aspects of the status and progress of the works.
Work closely with contractors to maintain material and works quality/standards according to project specification.
Monitor and update daily manpower reports and feedback shortage.
Perform site coordination with other trades.
Monitor and anticipate possible shortage of materials.
Direct involvements and supports of safety controls to workers all the time.
Active participation on safety programs and implementation.(Attend to Tool Box Meeting)
Performs skilled electrical work of all types in shop or field.
Practices good housekeeping including jobsite cleanup and conforms to safety standards, rules and practices.
Conduct daily routine inspection of all facilities equipment such as HVAC equipment, Electrical, Plumbing and Civil including X-ray machine / Walk thru metal detector and Gate barrier.
Perform preventive and corrective maintenance of all facilities equipment MEP, X- ray / walk thru metal detector and substations (LV panel / Capacitor bank/ Generator)
Perform weekly Generator test run with load.
Prepare work orders for the technicians’ daily jobs.
Coordinate and inspect subcontractor’s activities.
Coordinate and update clients’ representatives’ report.
Prepare daily, weekly and monthly customer service reports
Receiving the materials & checking the quality.
Prepare quotation and estimate for discretionary / additional work. KENTZ Engineers and Constructors
SAUDI ARABIAN KENTZ CO. LTD.
P.O. Box 60752, Riyadh 11555, K.S.A. P-655
Designation: Electrical Supervisor
From: December 5, 2013 – May 18, 2014
Project: SADARA petrochemical Project
KENTZ Engineers and Constructors
SAUDI ARABIAN KENTZ CO. LTD.
P.O. Box 60752, Riyadh 11555, K.S.A.
P-655
Designation: Electrical Supervisor
From: May 21, 2013 – November 30, 2013
Project: Raz Al Khair Water Desalination and Power Plant Project KENTZ Engineers and Constructors
SAUDI ARABIAN KENTZ CO. LTD.
P.O. Box 60752, Riyadh 11555, K.S.A.
P-644
Designation: Electrical and Instrument Supervisor
From: July 19, 2012 - May 18, 2013
Project: Ma’aden Aluminum Cast House Project
Ma’aden Aluminum Smelter Project
DUTIES AND RESPONSIBILITIES
Supervise and monitor every aspects of the status and progress of the works.
Work closely with contractors to maintain material and works quality/standards according to project specification.
Monitor and update daily manpower reports and feedback shortage.
Perform site coordination with other trades.
Monitor and anticipate possible shortage of materials.
Prepare and update weekly progress report and submit to planning department.
Prepare request for inspection according to approve ITP.
Direct involvements and supports of safety controls to workers all the time.
Active participation on safety programs and implementation.(Attend to Tool Box Meeting)
Performs skilled electrical work of all types in shop or field.
Practices good housekeeping including jobsite cleanup and conforms to safety standards, rules and practices.
Build, calibrate, maintain, troubleshoot and repair electrical instruments or testing equipment.
Install and maintain electrical control systems and solid state equipment.
Assembles and tests experimental motor-control devices, switch panels, transformers, generator windings, solenoids, and other electrical equipment and components according to engineering data and knowledge of electrical principles
Provide general guidance and work direction to a group of electrical technicians generally in the range of two to four personnel.
Applies electrical theory and related knowledge to test and modify developmental or operational electrical machinery and electrical control equipment and circuitry in industrial or commercial plants and laboratories
Prestige Tower Condominium Corp.
Emerald St. Ortigas Center Pasig, Philippines
Designation: Building Maintenance Technician
From: December 5, 2011 - April 10, 2012
Victoria Court Hotel
Canley Ave. Pasig, Philippines
Designation: Electrical Technician
From: October 12, 2010 - November 28, 2011
Trans-Orient Management Services Inc.
Cinerama Complex, Recto corner Quezon Blvd. Quiapo Manila, Philippines Designation: Industrial Control Technician
From: August 21, 2009 – October 5, 2010
DUTIES AND RESPONSIBILITIES
Check HV and LV transformers, generators, switchgears for any abnormalities.
Take hourly operating log of Switchgears, kWh meters, and building kW demand.
Check panel boards for presence of vermin and or combustibles materials.
Check transformer room for adequacy of ventilation.
Record major operational parameters, including current, voltage, power factor, room temperature and infrared measurements.
Check distribution boards, for humming or any signs of loose contacts.
Check electrical risers for any signs of vermin’s, combustible materials.
Check MDF room for presence of vermin’s, debris and water leaks.
Check and replace busted bulbs, starters, defective switches and socket outlets.
Report for any abnormalities.
Attends to tenants’ job request and other important job assignment.
Use infra-red thermometer to check bus duct joints, transformer connection for any heat buildup.
Report for any sudden increase of temperature reading.
Test-run generator at no load condition (maintenance jogging) record operating parameters.
Check proper operation of ammeters, volt meters, indication lamps, relays and other protection relays.
Check generator batteries & chargers for cracks, leaks, or corrosion.
Inspect proper operation of chargers.
Inspect radiator for leaks, corrosion, and debris.
Routine inspection and control of all areas of the building.
Reading of meters (monthly) and logging in of all data collected.
Understanding of basic technical aspects of property i.e. computer room air- conditioning, chiller, fire protection and BMS system.
Installs, maintains and repairs wiring systems, sets power and lighting boards and panels, connects motors and controls, installs fixtures and checks and tests electrical equipment before putting into service.
Removes and installs electric motors, repairs and adjusts contactors and controllers.
Performs preventive maintenance on electrical equipment.
Revises existing systems and equipment to conform to verbal instructions, revised drawings and work orders.
Inspects electrical equipment to determine the extent of repairs required using test equipment such as voltmeters, ammeters, ohmmeters, meggers, meter-shunts, clamp- on instruments and volt- ohmmeters.
Disassembles electrical equipment, makes wiring diagrams, replaces or repairs parts such as starter switches, controls, elements, wiring; tests and rewinds defective coils, diagnoses malfunctions and makes repairs to motors; checks for electrical integrity, undercuts and polishes commutators, rewinds motors and armatures and reassembles electrical equipment.
Makes proper internal and external connections.
Performs necessary mechanical work in the rebuilding of large motors and generators, except for major machining operations, by disassembling motor, replacing bearings, aligning shafts and armatures, reassembling and testing completed job.
Cadiz Community Satellite Link (COMSATEL)
San Eusebio Subdivision, Cadiz City Negros Occidental, Philippines Designation: Outside Plant Cable Technician
From: September 15, 2008 - July 19, 2009
DUTIES AND RESPONSIBILITIES
Repair and calibrate signal and frequency from head-end to distribution line.
Calibration of frequency from trunk amplifier and line extender to tap-off. J. Vitangcol Construction Company
Designation: Industrial Control Technician
From: July 27, 2007 - September 25, 2008
Project: Cadiz Commercial Port Project
Cadiz City Negros Occidental Philippines
DUTIES AND RESPONSIBILITIES
Build, calibrate, maintain, troubleshoot and repair electrical instruments or testing equipment.
Install and maintain electrical control systems and solid state equipment.
Action the work plan and to solve technical maintenance problems by applying learned procedures.
Analyzing problems in complex industrial equipment, diagnose the solution and implement the repairs/ correct equipment faults.
Execute preventive and predictive maintenance to optimize availability and reliability and quickly return under-performing equipment to design specification program
(calibration, inspections, cleaning, and adjustment).
Check the operation, adjust, replace, repair, configure, calibrate and maintain the area equipment to ensure its efficient operation and availability.
Ensure high quality standards.
6D Techno Enterprises
Bata Subd. Bacolod City, Philippines
Designation: Industrial Control Technician and Motor Rewinding From: April 30, 2002 - May 22, 2007
DUTIES AND RESPONSIBILITIES
Disassembles electrical equipment, makes wiring diagrams, replaces or repairs parts such as starter switches, controls, elements, wiring; tests and rewinds defective coils, diagnoses malfunctions and makes repairs to motors; checks for electrical integrity, undercuts and polishes commutators, rewinds motors and armatures and reassembles electrical equipment.
Makes proper internal and external connections.
Performs necessary mechanical work in rebuilding of large motors and generators, except for major machining operations, by disassembling motor, replacing bearings, aligning shafts and armatures, reassembling and testing CHARACTER REFERENCES
Raed Al Abdulrahman
Operation Manager
Abu Dhabi Airports Company (ADAC)
Al Bateen Executive Airport
**************@****.**
Moaiad Abasher Mohamed Ahmed
Facilities Engineer
Abu Dhabi Airports Company (ADAC)
Al Bateen Executive Airport
********@****.**
I hereby declared that the data stated above are
true and correct to the best of my knowledge.
Jeave D. Dema-ala
Johnny Nassif
Critical Engineering Lead
Australia Philippines for Bank of
America Merrill Lynch
***********@*******.***
Dominic Hegarty
E&I Superintendent
Saudi Arabian Kentz Co. Ltd.
P.O Box 3462, Al Khobar 31952
Kingdom of Saudi Arabia
***********@*****.***
Contact this candidate