EMMANUEL PINEDA, P.E.

*** *. ***** ***, adeuk5@r.postjobfree.com

La Puente, CA 91744-2074 626-***-****

SUMMARY

Mechanical Engineer with extensive experience in Engineering, Product Research and Development, Design and Drafting. Expert in preparation of Mechanical/Machine/Electro-Mechanical Parts & Assemblies, Toolings, Jigs & Fixtures, Inspection.Gages, Sheet Metal Enclosures, Castings, Forgings, Plastic Injection Parts, Piping Assemblies, High Capacity Barrel Type & Split Case Type Centrifugal Multi-Stage Pumps, Multi Phase Screw Pumps, Skilled in preparing Mechanical Specs., Machining/Fabrication & Assy Process, Cost Studies/Estimates.

Utilized Agile and Windchill Product Lifecycle Mgmnt Systens to admnister Drawings, BOMs and ECNs.

Operated Autocad 2016, Autodesk Inventor 2016, Creo 3.0, Catia V5-R17, SolidWorks 2017 Cad Softwares.

WORK EXPERIENCE

FLOWSERVE CORP, Vernon, CA

Sr. Project Engineer - Commercial Pump Division Jul 2007 – May 2020

-Accountable for the detailed Design & Drafting of High Capacity Barrel Type & Split Case Type

Centrifugal Multi-Stage Pumps, Multi Phase Screw Pumps, Outlines, Base Plates, Couplings and Piping

Systems which are used in the Oil & Gas Industry in accordance with API 610 and Flowserve Standards.

-Prepared Part Drawings w/ GD&T per ASME Y14.5 & Bill of Materials, Engineering Change Notice (ECNs)

needed using Agile and Windchill Product Lifecycle Management (PLM) Softwares.

-Specified required Non Destructive Testing (NDEs) and Weld Procedures.

-Operated Agile, Baan and Windchill PLM Systems to manage Drawings, BOMs and Eng’g Change Notices.

-Dispositioned Supplier Deviation Requests (SDRs) & Non Conformance Requests (NCRs)

-Assisted in the development of New Pump Projects for the Product Engineering Group.

-Worked extensively with Production Personnel, Project Managers, Project Engineers & Product Engineers

which are required for the completion of pump projects from start to finish.

-Produced accurate 2D Drawings using Autocad 2016 & 3D Solid Models using Autodesk Inventor 2016,

Creo 3.0, Solidworks 2017 in all Design & Drafting requirements of the pump projects

AMERICAN KLEANER MFG. CO. (Karcher), Rancho Cucamonga, CA

Mechanical Design Engineer Jan 2005 – May 2007

-Conceptualized, Designed and Drafted High Pressure Multi-Piston Pumps Parts & Assemblies, Brass Forgings

Die Casting, Metal Injection Parts, Control/Check Valves, Nozzles, Shaftings, Bushings, Compression Springs,

O-ring Seals and Plastic Injection/blow Mould Parts that are used in Pressure Washers.

-Effectively Coordinated with Rapid Prototyping Vendors and Parts Mfg. Facilities.

-Performed various Engineering Calculations used in the design of Pumps.

-Executed Finite Element Analysis (FEA) of Pump Parts using CATIA V5.

-Prepared Detailed Asembly & Part Drawings w/ GD&T per ASME Y14.5 and Bill of Materials.

-Used SAP (Systems Application & Products) PLM to manage Drawings, BOMs and Eng’g Change Notices.

-Operated CATIA V5-R17 in the preparation of 3D solid/surface models & assemblies and 2D Drawings

ELECTRA GEAR, Anaheim, CA

Mechanical Engineer Jan 2004 – Dec 2004

- Conceptualized, designed and drafted Worm Gear Speed Reducer parts and assemblies, Die and Sand Castings,

Housings, Bushings, Shaftings, Worm/Helical Gears and Plastic Parts; used Geometric Tool (ANSI Y14.5-1982).

- Performed design stress calculations of shaftings and Worm/Helical Gears; provided production/sales support.

- Prepared detailed assembly and part drawings, Bill of Materials (BOMs), engineering changes (ECs) and

manufacturing process routings.

- Executed Detailed Asembly & Part Drawings w/ GD&T per ASME Y14.5

- Achieved Failure Analysis and mech, testing on Gear Reducer Parts/Assemblies

- Prepared Quality Report Statistics.

- Operated AutoCAD 2002, Inventor 5.3 and SolidWorks 2001+.to produce 2D drawings and 3D Models

NMB TECHNOLOGIES CORP., Chatsworth, CA

Mechanical Designer/Engineer Oct 2002 – Apr 2003

- Accountable for the Conceptualization, Research & Development, Design, Drafting & Specs. of Mechanical Packaging of a POWER SUPPLY UNIT from Prototype to Production stage in close coordination with Electronic Engineers & PCB Designers. These include: Sheet Metal Enclosures, Plastic Parts, Stamped Heatsinks, Insulators, Labels, Cooling Fans, Cable Wire Harness, Connectors, A/C Inlet/Outlets, Fasteners,

Magnetic Components, Carton Packaging, etc. Prepares Part Drawings w/ GD&T per ASME Y14.5

Utilized Autocad 2002 & Solidworks 2001 in all design and drafting jobs.

BERG POWER ENGINEERS, West Covina, CA

CAD Designer/Drafter May 1999 – Oct 2002

-Designed & Drafted Physical Assemblies of Electrical Equipments used for Electric Substations.

-Drafted Electrical Circuit Diagrams & Equipments, Survey Layouts, Civil Works, Foundations & Structurals, etc., which are used in Electric Power Sub/Generating Stations.

-Prepared Detailed Cad Drawings/Specs of Mechanical Building Facilities such as HVAC & Plumbing Systems.

-Utilized AUTOCAD 14/2000 & MICROSTATION-J software in all design & drafting works.

ASTEC CUSTOM POWER, INC., Pasig, Philippines

Senior Mechanical Engineer Jun 1995 – Mar 1999

-Accountable for the Conceptualization, Research & Development, Design, Drafting, & Specifications of the Mechanical Packaging of a POWER SUPPLY UNIT from Prototype to Production stage in close coordination with Electronic Engineers & PCB Designers. These include: Sheet Metal Enclosures, Plastic Piece Parts, Stamped Heatsinks, Insulators, Barcode Labels, Fans, Cable Wire Harness, Connectors, A/C Inlet/Outlets, Fasteners, Carton Pkg.,etc. Uses Autocad 14, Mechanical Desktop 2 and Pro/Engineer 20 in all design jobs.

- Conducted Thermal/ Air flow Analysis and Computations.

-Provided all the required Parts, Bill of Materials, Electro-Mechanical Assembly/Part Drawings w/ GD&T per ASME Y14.5 and Specifications needed for prototype development & production release.

GIANTECH INDUSTRIES, INC., Pasig, Philippines

Design Section Head Oct 1994 – Jun 1995

-Designed and draftted preliminary sketches of various Industrial Machineries such as: Gear Speed Reducers, Helical & Spur Gears, Machinery Shaftings, Storage & Mixing tanks, Screw & Horizontal Belt Conveyors, etc.

-Performed Engineering Design Stress Calculations for optimum sizing of Mechanical Parts

- Prepared Part Drawings w/ GD&T per ASME Y14.5

-Coordinated with customers regarding their proposed projects to be designed and fabricated.

-Supervised, trained & checked drawings made by draftsmen. Utilized Autocad R13 in all design work.

XEBEC MEMORY SYSTEMS, Muntinlupa, Philippines

Tooling Engineer Jan 1992 – Mar 1993

- Designed and drafted Precision TOOLINGS required for the assy. of HARD DISK DRIVES and GAGES

used for incoming inspections of various productive parts. Uses AUTOCAD 12 in all design & drafting works.

- Prepared and revised product drawings w/GD&T per ASME Y14.5

- Specified & implimented design improvements in all existing Toolings.

-Coordinted with local vendors regarding fabrication/approval of jigs, fixtures & gages

GENERAL MOTORS PILIPINAS, INC., Muntinlupa, Philippines

Tooling Design Section Head Jan 1984 - Nov 1991

-Oversees the design and drafting of special machines & precision toolings (such as: jigs, fixtures, hss cutting tools, forming/cutting dies, inspection gages & test equipts.,etc.) required in the manufacture & assembly of Automotive Transmission parts (such as: Cast Iron/Aluminum Housings, Shaftings, Helical and Spur Gears, Small Shifting Parts, etc.) with quality requirements maintained.

-Designs & Drafts modification of production machines such as cams, attachments, accessories & components

-Accounts for the drafting of Casting & Forging drawings of transmission parts

-Prepares manufacturing cost studies & estimates.

-Uses Geometric Dimensioning & Tolerancing (ANSI Y14.5-1982) in all design work.

EDUCATION

Bachelor of Science in Mechanical Engineering

Don Bosco Technical College, Mandaluyong City, Philippines

GPA: 3.5

GOVERNMENT CERTIFICATION

Licensed Professional Engineer - Mechanical (California BPELS License No. M-32345)

Contact this candidate