Sign in

Technician Power

Lowell, MA, 01851
July 23, 2020

Contact this candidate



** ****** ***. # *, ******, MA *****

Cell: 978-***-**** -


Experienced in the manufacturing of precision Optical,IR Laser Alignment, Optical beams. Manufacture of pressure transducers. Comfortable with micrometers, oscilloscopes, signal generators, calipers and other input/output electronic test equipment. Experience with Product Safety, Analysis, and Thermal evaporation, Chambers, Defibrillators, also experience working in Clean Room and a Lean Manufacturing Environment.


July 2019 to present - Metrology Calibration Specialize, Elbit systems of America, Merrimack NH.

Daily Responsible to Calibrate all the items that needs to be Cal, such as chambers, power supplies

Flukes, DMM, CI systems, black body box, oscilloscopes, Air Ionizers, Optical tables, ESS ground system

Tester, Auto collimator, DPPCM, Familiar with theodolite. This is what my responsible each and everyday

Make sure the items up to date.

June 2017 to June 2019. - Optical Laser IR Alignment Test Tech., SAFRAN OPTICS 1, BEDFORD, NH.

Involved with 2 programs such as LTLM II, and I CUGR. Aligning, focusing, optimizing the units,

analyzing, correcting data’s in the database and guiding the units where to go after finishing the measurement.

Participating in Reliability units, such as Vibration, Dropping, Spinning, Shocking, to be sure the units still meet the spec.

Troubleshooting, diagnosing, replacing, FMEA if needed.

Understanding the procedures, schematics and verbal instructions with the company guideline.

Sep 2016 - March 2017 - Sr. Optical Alignment Technician, BLOCK ENGINEERING-MARBORO, MA

Responsible focus is for Lasersens and Laserwarns.

Integrated, aligned optical beams, detector, using the Collimator to optimize the power.

Using black body boxes to see if any artifacts on the lens or mirrors, record the data’s to the database

Using PCU, ACU, CCU and Q7 Boards.

Dec 2011 - Feb 2016 - Moisture Cell Alignment Test Technician, SERVOMEX CORPS, Woburn, MA

Responsible assembles and calibrates Laser Cells per specification units

Mounts cells in chassis arm laser diode to center and aligned in the fixture to get power such as SDC, RDC.

Optimize power and records data to complete assemblies.

Leak check to ensure there are no leaks.

Assemble the cell and putting in the hot box at 40 degrees temperature.

Re-optimize the power to maximum.

Re-checking leak check and send it to purge for 36 hrs.

August 2009 – Nov. 2011 - Optical Aligned Test Technician, FLIR SYSTEMS CORPS, No. Billerica, MA

Responsible alignments the 1.8x, 1.0x telescope, boresight an X,Y to the target, using the collimator and black body box to see any artifact, using image to capture the clipping to be center.

Calibrations of equipment such as X,Y,Z stage and be sure stage is level, potting telescope with RTV and secured with overnight oven.

Collection data to the databases.

Feb. 2008 - April 2009 - Laser Optical Aligned Tech, OPTIKOS CORPS - Wakefield, MA

Responsible for test set-up and build mechanical assemblies from work instruction.

Ability to read blueprints schematics wiring diagrams to determine method and sequence alignments.

Using different type of PRESIM, MEO Laser attach to heat sink aligned the X,Y,Z to get high level of max power characterized, verify the data to the database.

March 2007- Jan 2008 - Sr. Optical Alignment Technician, BAE Systems - Nashua, NH

Responsible for aligning and final boresight of Nd.

YAG solid state laser systems setup test and troubleshoot Laser Lab diagnostic equipment, including Optical test set up and calibration of equipment.

Familiar with ocean optics spectrometers required for measuring and troubleshooting wavelength and proper parameters.

Experience setting up optical tables, aligning cameras and associated hardware.

Perform ATP’s for pre-thermal and post thermal testing require for military applications.

Experience with O-scopes, signal generators power supplies tech’s DVM functions spectrum-pro and spiricon camera’s required for date collection.

Experience with high power lasers, multi-band lasers inspecting optics, proper assembly including bench level and system level test.

Managing ESS lab, data collection, troubleshooting chamber issues, processing detailed reports for failure analysis and performing vibration table requirements.



April 2002 – Feb 2007 - Alignment Test Technician / 2nd Shift Coordinator, AGFA Corporation - Wilmington, MA

As lead technician responsible for helping junior technicians resolve problems that may arise.

Troubleshoot system problems and determine the root cause.

As Alignment Technician align laser, lenses, and other sub-modules of the “optical bed” for a color film copy machine.

Using an integrated test system verify compliance to all specifications at each stage of a six hour, twelve-step assembly process.

March 1998 – March 2002, Senior Optical Test Technician, TELEPHOTONICS - Wilmington, MA

As lead test technician, characterized multi-channel electro-optical devices for R&D and production.

Optical devices included variable optical attenuators, thermo-optic switches, splitters, and optical taps.

Measured device performance parameters such as insertion loss, PDL, dynamic range, wavelength dependence, adjacent channel isolation, and heater electrical power.

Trained junior operators. Interfaced with optical design engineers, test engineers, and operations manager.

Maintained optical test setup. Maintain results in Excel spreadsheets and verify result database accuracy.

Cross trained on Newport Pigtail station


Lincoln High School, Stockton, CA

High School Diploma

Certificate: FMEA, SPC, Certificate of continuing Education, White Belt.

Training Courses: SIX SIGMA SPC, FMEA, ISO 9000, Soldering 5s classes, 6s classes, lean manufacturing, kaizen

Contact this candidate