Design Engineer Water Treatment

RESUME

S. HARIKRISHNAN

No. */**A, Balaraman *’st Cross Street,

Nanmangalam, Chennai - 600117

Mobile No: +91-978*******, 855-***-****

E– Mail: ************@*****.**.**

PROJECT MANAGEMENT/ CADD ENGINEERING / HVAC / MEP / PIPING ENGINEERING / FIREFIGHTING / PLUMBING/ UTILITY JOBS

Carrier Objective:

To obtain a challenging position in a progressive organization that gives me challenges and opportunities to enhance my knowledge and hone my skills in accordance with latest trends and part of a team that dynamically works towards the growth of the organization and gains satisfaction.Key Skills:

Good command over Designing Software – SOLID WORKS 2010, CATIA, AutoCAD. Designing & Drafting, Planning & Product Development, Construction. (Standards followed ASME, TAC, NBC, NFPA, ASHRAE, ISHRAE, BIS etc.).

Over 16 years’ experience in (Automobile & Construction field) Designing & Drafting of HVAC, Process & Utility piping systems, Fire Protection Systems, Sprinkler Systems, Fire Extinguisher Layouts, compressed air systems, Air Conditioning system, Ventilation systems, Waste Water Treatment Systems, Plumbing systems, Technical Write-Up, MTOs, Piping specs.

Career contour:

From July 2017 to Till Date.

PLANNING CUM DESIGN ENGINEER- At SHINWOO ENGINEERING PVT. LTD, (MECH, ELECT & CIVIL CONTRACTORS) CHENNAI,

Handling Projects:

M/s. KIA Motor India Pvt Ltd, Anantapur Dist. - AP, (MAIN CONTRACTORS –EXTERNAL FIRE FIGHTING WORK).

M/s. SL-AP Pvt Ltd, Anantapur Dist. - AP, (MAIN CONTRACTORS –MECHANICAL&ELECTRICAL WORK).

M/s. DONGA HWASUNG India Pvt Ltd, Anantapur Dist. - AP, (MAIN CONTRACTORS –OVERALL PROJECT WORK)

M/s. NVH KOREA INDIA PLANT, Anantapur Dist. - AP, (mechanical work)

Key Responsibilities:

Design concepts & its approvals (Drawings & Technical data) as per the consultant / client requirements, ensuring cost savings for client / organization.

Development and maintenance of Design documents and Maintenance of documents & drawing transmittal record issued to Project/clients.

Preparation the B.O.Q. & Quotations. Preparation of MRN (material Request Note).

Preparation of Heat load calculation, Static pressure calculations, Pump Head Calculation.

Modification and rerouting the Fire fighting drawing as per the input of Architecture, Civil & Other Services.

Design & development of HVAC Standard drawings & Documents.

Prepared the Plant Layout, Equipment Layout, Schematic drawing, Piping routing layout & Foundation Drawing According to client requirement & obtaining client approval.

Design & Drafting of MEP, Preparation of AC ducting layout.

Preparation of pipe spool dwg. Preparation of material Quantity Take off as per dwg.

Preparation of MEP-Coordination drawings. Preparation of As-built drawings.

Preparation of All kind of shop drawings (Mechanical, Electrical, civil & structure).

Co-coordinating at site for any problems & doing changes as per site conditions, indicating & producing the same in the drawings.

Preparation of RCP layout (internal false ceiling area RCP).

From June 2015 to May 2017.

DESIGN ENGINEER-HVAC (Design & Planning Dept) At ETA ENGINEERING PVT. LTD, BANGALORE,

Handling Projects:

M/s. Hilton Hotel Kensington Road& Sheraton Hotel Whitefiled, Bangalore,

M/s. Mysore Forum & Central Mall –Mysore.

M/s. Shantiniketant Mall Whitefiled–Bangalore.

M/s. Huaiwei Technologies India Pvt, Ltd Whitefiled-Bangalore

M/s. Juniper Network Elanath Marathalli-Bangalore

M/s. Embassy One – Bangalore

M/s. National Thermal Power Corporation Ltd (NTPC)-KUDGI

Key Responsibilities:

Design concepts & its approvals (Drawings & Technical data) as per the consultant / client requirements, ensuring cost savings for client / organization.

Development and maintenance of Design documents and Maintenance of documents & drawing transmittal record issued to Project/consultants/clients.

Preparation of Heat load calculation, Static pressure calculations, Pump Head Calculation. Preparation the B.O.Q.

Modification and remodeling the HVAC drawing as per the input of Architecture, RCP & Other Services.

Design & development of HVAC Standard drawings & Documents.

Prepared the Plant Layout, Equipment Layout, Schematic drawing, Piping routing layout & Foundation Drawing According to client requirement & obtaining client approval.

Co-ordinating at site for any problems & doing changes as per site conditions, indicating & producing the same in the drawings.

Design & Drafting of HVAC, Preparation of AC ducting layout.

Detail Engineering of Routing, Section Details, and Preparation of shop drawing.

Preparation of duct fabrication dwg. Preparation of material Quantity Take off as per dwg.

Preparation of MEP-Coordination drawings. Preparation of As-built drawings.

Preparation of All kind of shop drawings (Mechanical).

From Oct 2013 to May 2015.

MECHANICAL –CAD DESIGNER at TEAM LEASE SERVICES PVT. LTD, CHENNAI (DEPUTED TO HITACHI PLANT TECHNOLOGIES INDIA PVT. LTD, (DESIGN & CONSTRUCTION IN ALL SERVICES))

Handling Projects:

M/s. Hitachi Automotive System Ltd., Phase -1 (KUNNAPATTU-OMR) -Tamil Nadu.

M/s. Asahi Modi Materials Pvt, Ltd.-(Bharuch)-Gujarat.

Key Responsibilities:

Prepared the Plant Layout, Equipment Layout, P&ID, Piping routing layout & Foundation Drawing according to client requirement & obtaining client approval.

Co-ordinate & Make site visits’ during execution of projects, Preparation the B.O.Q & Cost estimation.

Design & Drafting of HVAC, Heat load calculation, Preparation of AC ducting layout.

Preparation of Fire Fighting (Hydrant& Sprinkler) & Plumbing drawing,

Study and knowledge about Process Flow Diagram, WTP & STP plant layout.

Detail Engineering of Routing Section Detail, Preparation of Boiler system, Pressure vessel drawing. (STEAM LINE)

Preparation of Isometric drawings of spools for fabrication & Erection at site.

Preparation of MEP-Coordination drawings. Preparation of As-built drawings.

Preparation of All kind of shop drawings (Mechanical, Electrical, Civil).

From June 2008 to Sept 2013.

ENGINEER-CAD at SAMHO GUNYOUNG CONSTRUCTION PVT. LTD, (MECH & ELECT. INTERNATIONAL CONTRACTORS) CHENNAI,

Handling Projects:

M/s. Leading solution cable (I) Ltd., Phase -1&2 (HARYANA)

M/s.Lotte Construction Private Limited-M/s.Lotte India Corporation Limited-Nemam-Thiruvallur Dist. (TN).

M/s. Samsung Heavy Industries Co., Ltd., M/s. Samsung India Electronic Pvt., Ltd., Sunguvachatram, (TN) & NOIDA.

M/s. Hyundai Amco India Pvt. Ltd., - M/s. Hyundai Motor India Ltd., (Engine #3) Sriperumbur (TN).

M/s. Hyundai WIA India Ltd., Sengadu, Thiruvallur Dist. (TN),

M/s. Hyundai Mobis India Ltd., Mannur, Thiruvallur Dist. (TN).

Key Responsibilities:

Preparation of Equipment Layout, GAD, P&ID, Duct layout, Piping routing layout & Foundation Drawing according to client Requirement & obtaining client approval.

Design of Fire protection systems, Sprinkler Systems, Hydraulic Calculations, Piping specs. Fire Extinguisher Layouts, Compressed air systems, Air Conditioning system, Ventilation systems (HVAC), Waste Water Treatment Systems, and Plumbing Systems.

Preparation of AC ducting layout (Air Handling Unit).

Preparation of Pipe Material Specification, Valve Data Sheet.

Preparation of Bill of Materials /B.O.Q, and material spec. for all piping and utility systems.

Detail Engineering of Routing Section Detail. Preparation of Boiler system (STEAM LINE).

Preparation of Isometric drawings of spools for fabrication & Erection at site. Preparation of As-built drawings.

Testing & Commissioning of Pump house, HVAC equipments, fire sprinkler systems, boiler systems, waste water treatment systems (also fire alarm system erection).

Coordination with Civil and Electrical team. Inspection of Air, Water & Fire lines for Hydrostatic Pressure Test.

Coordination with other Subcontractors’ for to meet their requirements.

From July 2007 to June 2008.

CAD- ENGINEER at INSAP ENGINEERS PVT LTD. Chennai - 001(A Division of IGP Group)

Handling Products:

Manufacture and Supply of All Types of Rubber, PTFE Teflon, Easy Flex, Thermoplastic,

Stainless Steel Metal Corrugated and Other Hose Assemblies and All Types of Hydraulic, Pneumatic Fittings.

Customers Name :

1)BOC Gases Ltd – Bangladesh.

2)Ashok Leyland Ltd. 3) Bharath Earth Movers Ltd.

4)Caterpillar (India) Pvt Ltd. 5) Larsen & Toubro Ltd.

Key Responsibilities:

Preparation the G.A Drawing for Hose Assembly& Bellows.

Preparation the B.O.Q & Cost estimation. Detailing of hose fitting drawing for manufacturing Process.

Handling the Customer call, Sending Drawing & Catalogue to Customer

Generating 2D & 3D Drawing as per Customer Requirement. Vendor development & adhering to deadlines.

From June 2005 to May 2007.

ENGINEER- CAD at CHOWEL INDIA PVT LTD Sriperumbudur.

Handling Products:

Industrial Structures, Mezzanine floors, Trolley making, Wet & Dry spray paint booths, Pipe racks & supports & Ducting etc.,

Systems Manufactured:

Main fabricator form M/s. Saint Gobain Glass India Ltd., &M/s. Hyundai Motor India Ltd., &its ancillaries, for their expansion & improvements projects.

Key Responsibilities:

Prepared the Plant Layout, Equipment Layout, Piping layout & Foundation Drawing according to client requirement & sending for client approval.

Erection works during shutdown time. Preparation the B.O.Q & Cost estimation.

Preparation of AC ducting layout. Preparation of Trolley layout drawing (for Fabrication).

Preparation of pipe supports fabrication drawing.

Representing the manufacturing department at the customer and product development liaison meetings and ensuring effective implementation of design practices to meet customer needs.

Revised CAD drawings for as-built status.

From Aug 2004 to May 2005.

SHORT TERM TRAINEE & TECHNICIAN APPRENTICE at DELPHI TVS DIESEL SYSTEM PVT. LTD., Sriperumbudur.

Handling Products:

Delphi – TVS Diesel Systems Ltd a joint venture between Delphi Diesel Systems, France. The company manufactures Rotary Fuel Injection Equipment systems (FIE) and Common Rail for Passenger diesel cars, Mini truck and Tractor. As a TS16949 and TPM Certified concern. (Fuel Injection Pump Mfg, Injector Mfg, Fuel Filter Mfg)

Key Responsibilities:

C.N.C & V.M.C Machine operating. Inspection of the automobile spares parts & Preparation of inspection report.

Maintain and update drawing file, inspection report & material stock.

Educational & Technical Qualification:

Diploma in mechanical Engineering; 2004

Raja Desingh Polytechnic College, Gingee-604 204, Affiliated to TNDTE with 86%

12TH -2001

Raja Desingh Govt, Boys Higher Secondary School, State Board of Education TN

10TH-1998

Raja Desingh Govt, Boys Higher Secondary School, State Board of Education TN

DESIGN PACKAGES:

Design Tools : Auto cad, Solid Works, Design Tools DuctSizer Version 6.4, Design Tools PipeSizer Version 6.4

OS : Windows XP, VISTA, WINDOWS 7&10.

Office packages : Microsoft Office.

PERSONAL PROFILE:

Father’s Name : N. Senthamarai Kannan

Date of Birth : 04-05-1982

Nationality : Indian

Passport No : G5118140-valid-2017

Marital Status : Married

Languages known : English, Tamil, Hindi

Hobbies : Reading Books, Earning Music, Watching T.V

Permanent Address : No: 2/2a, Pillaiyar Koil Street, Vadavanur Village, Kadambur Post, Gingee (T.K),

Villupuram Dist. Pin: 604 206.

DECLARATION

I hereby declare that the particulars given above are true and correct to the best of my knowledge and belief.

Place : Chennai. Yours Sincerely,

Date : (S.HARIKRISHNAN)

Contact this candidate