* ** *

C U R R I C U L U M V I T A E

[RUBAN RAJ.S – INSTRUMENTATION ENGINEER]

EMAIL: adepq1@r.postjobfree.com

MOBILE NO: +91-956*******

Objective:

Aspiring for the position in the field of Instrumentation in oil & gas and Petroleum industries where in my capabilities and knowledge can contribute to the organization. Areas of Expertise:

Construction, Inspection, Calibration, Procurement, Installation and Commissioning in the field of instrumentation in oil & gas fields and refinery.

Training Undergone:

Courses are done as per SHELL standard and as per PDO requirement (OMAN).

• HSE ORIENTATION

• H2S (HYDROGEN SULPHIDE) AWARNESS AND ESCAPE

• HSE LEADERSHIP FOR SUPERVISORS

• AUTHORISED GAS TESTER

• PERMIT TO WORK SYSTEM SIGNATORY.

Exposure to computer skills:

MS WORD

MS EXCEL

MS POWER POINT

Exposure to codes and standards:

IEC ANSI ASTM

CECC SHELL DEPS BS

API PDO STANDARDS

Professional Summary:

Worked as an ‘INSTRUMENTATION ENGINEER’ in AL-TASNIM ENTERPRISES L.L.C (OMAN) for 3 years in oil and gas industry and consistently increasing responsibilities in execution of instrumentation work.

Conducting raw material inspection, calibration, function testing, loop checking, insulation testing and continuity check of ESD valves, pressure transmitter, pressure switches, temperature gauge, temperature transmitter and instrument and electrical cables

Implementing Site Acceptance Test (SAT) for IPF and hydraulic panel.

Reviewing vendor documents, material test certificate(MTC), data sheet and Inspection release note to ensure material is purchased as per specification

Referring and reviewing Design, AFC Drawings PEFS, P&IDS, Hook up documents, cable schedule, Block Diagrams, material take off (MTO), Cause and Effect Diagrams, Loop Diagrams, Functional Logic Diagrams, Terminations Diagrams, Cable Tray/Trench Lay-outs, Interconnection Schedules, Installation detail drawings and Alarm and trips Instrument Index, Input & Output Lists for instrument installation, cable laying, cable termination and commissioning

Commissioning assistance of Oil & Gas production wells, gathering station, and skids

Preparing RED LINE MARK UP (RLMU) and AS BUILT drawings as per site condition.

Preparing Site Reports, Job Completion Certificates and final documentation QC Dossier. 2 of 3

Installation and commissioning of field And Control Room Instruments for Pressure, Flow, Level, Temperature, Smart transmitters, Control valves, Choke Valve, Heat detector,H2S Detector, Hydrocarbon Detector, Flame Detector, ESD valves, RTU (Vmonitor), IPF panel and hydraulic panels as per procedures in Oil wellheads.

Trouble shooting & simulation of field instrument loops & panel.

Providing assistance to vendor in Fiber optic splicing, Termination, Optical Time Domain Reflect meter (OTDR) Test.

Highlighting & cascading the precaution and the emergency procedure to the workforce i.e. the work related hazards, control measures & corrective action to be carried out in the field in the HSE point of view.

Preparing the work schedule and PTW for instrumentation activities.

Coordinate with the client regarding the work status and inspection, testing and commissioning.

Supervision of cable tray laying, cable laying and termination for field instrument cables.

Participate in Pre-Commissioning and Commissioning activities including final walk- through, Preparing Checklists, In identifying punch lists and closeouts. Project Details: [From Recent]

Project 1:

Company: AL-TASNIM ENTERPRISES L.L.C (OMAN)

Client: PDO– PETROLEUM DEVELOPMENT OMAN

Duration: August 2017 to January 2019

Description:

OFF PLOT DELIVERY CONTRACT (ODC) – Project involves various oil & gas exploration wells such as free flow (FF) wells, electrically submersible pump (ESP) wells, dump flood wells, beam pump wells, water supply wells and water injection wells. The Multi selector valves (MSV’s) is implemented for the project, where oil flow is monitored using temperature, pressure, flow transmitters and Multiphase flow meter (MPFM), similarly the oil flow is controlled and monitored using ESD valves and panels. Project is implemented as per PDO requirement by following SHELL Standards.

Roles & Responsibilities:

Supervision of Installation of instruments against engineering drawings and PEFS.

Inspecting the instruments has been installed properly as per requirement by following standard procedures and Specifications.

Make sure the Safety & Quality standards are followed & maintained during implementation of work.

Coordinate with client to update the current status, daily progress report and pre planning the activity as per work schedule and Preparing work permit, inspection reports and gets it cleared from client for the crew to work in the site.

Supported team to prepare as-built documents and Red line mark ups (RLMU)

Verification and Calibration of all field instruments before installation.

On-line monitoring of field instruments as required by Project Specifications.

Supported Electrical discipline for inspection and construction activities.

Ensure timely compilation of final documentation and obtain client approval.

Supported Pre-Commissioning & Commissioning team. Project 2:

Company: JNK INDIA PVT LIMITED

Client: RELIANCE INDUSTRIES LIMITED, INDIA

Site: ROGC (J3), Reliance, Jamnagar, Gujarat.

Duration: August 2015 to Dec 2016

3 of 3

Description:

The project is for oil and gas refineries where the engineering, procurement, construction is done for fired heater implementation. Currently implementing the regenerative fired heater for ROGC plant where the methane gas will be heated until its set point and will be let out from heater to further flow. The process flow will be implemented by using temperature, pressure, flow sensors and transmitters. The process flow will be implemented by following the Instrumentation and P&ID diagram. Roles & Responsibilities:

Preparing the work schedule, inspection reports and get it cleared from client.

Supported in sharing inputs to team to develop as build documents

Installation of instruments by referring engineering drawings and P&ID.

Inspecting whether all the instruments has been installed properly as requirement.

Make sure the Safety & Quality steps are followed during implementation.

Coordinate with client to update the current status & daily progress report. Project 3:

Company: JNK INDIA PVT LIMITED

Client: SPIC – SOUTHERN PETROCHEMICAL INDUSTRIES CORPORATION, INDIA Site: Ammonia plant, SPIC, Tuticorin, Tamilnadu.

Duration: May2016 – June2016

Description:

The project is for the Ammonia Plant of SPIC where the engineering, procurement, construction is done for furnace implementation in ammonia plant. The process flow will be implemented by using temperature, pressure, O2 analyzer, flow sensors and transmitters. The process flow will be implemented by referring the Instrumentation and P&ID drawings. Roles & Responsibilities:

Installation of instruments by referring engineering drawings and P&ID.

Inspecting whether all the instruments has been installed and calibrated as per standard.

Supporting electrical related work in equipment installation and inspection.

Coordinate with client to update the current status & daily progress. Educational Qualifications:

Institution/University Degree Year of Passing

Anna University

(Jeppiar Engineering College,Chennai, India)

B.E.

(ELECTRONICS &INSTRUMENTATION) 2015

Personal Details:

DATE OF BIRTH : 28TH MARCH 1994

GENDER : MALE

NATIONALITY : INDIAN

LANGUAGE KNOWN : ENGLISH,HINDI AND TAMIL ( SPEAK & WRITE) PERMANANT ADDRESS : G4A BBLOCK, THANGAM AVENUE, MAMBALASALAI, NEAR, A.M ROAD, SRIRANGAM, TRICHY 6.

Passport Details:

NUMBER : L2949042

ISSUED AT : TIRUCHIRAPPALLI

DATE OF ISSUED : 29/07/2013

DATE OF EXPIRY : 28/07/2023

Declaration:

The information given above is true to the best of my knowledge, and I am confident of receiving a positive response from your end. Regards.

DATE:

PLACE: (RUBAN RAJ S)

Contact this candidate