Electrical Quality

Location:

Jeddah, Makkah, Saudi Arabia

Posted:

July 13, 2020

Contact this candidate

Resume:

E & I QA/QC INSPECTOR

HARIS MUHAMMED.M

Mobile: +966********* (KSA),

Email: ***********@*****.***

Career Objective

Seeking career in growth-oriented Assignments with opportunity for challenging and creative in Project as a Electrical & Instrument Inspector with an organization of Repute Education.

Educational Qualification

B.E. in Electronics and Communication Engineering from PMC Tech College of Engineering, Secured 66%.

Higher Secondary School From E.M.E.A.H.S.S, in 2005,secured 62%

SSLC from H.I.O.H.S School Kondotty in 2003, Secured 62%

Certification

Saudi Aramco Approved Electrical Inspector for (JIGCC Sea Water Project).

Saudi Aramco Approved Electrical Inspector for (JIGCC Power Project).

Saudi Aramco Approved Electrical QC Inspector for (offshore Manifa causeway project).

Kemya (SABIC) Approved Electrical QC Inspector for (Saudi Elastomer Project).

Employment Profile

1.Client : Saudi Aramco(Saudi Arabian Oil Company)

Company : China harbor Engineering Arabia Co.

Project : JIGCC sea water System Project (Package -6)

Position : Qa/Qc Inspector – (Electrical)

Duration : March 2019 2015 To till the Date

Working Under the project (BI-10-01525-006) with Aramco JIGCC-Seawater System Package.

Pro-Actively addressing all quality issues and concerns for all upcoming activities

Active participation and contribution for continual improvement to increasing quality, productivity and progress per client requirements

Ensure the correct implementation Carrying out Inspection activities in accordance with Inspection and

Test plan.

Expedition & inspection on vendor works, Pending issues from vendor and sub vendor, engineering

drawing issues, follow up the status of sub orders materials & follow-up Electrical schedule.

Ensuring, monitoring of all Inspection and Construction activities to meet SAES, SAMSS, Schedule Q, SAEP, GI, Project Quality Plan, Scope of Work, IFC Drawings, SATIP, SAIC’s, SATR’s and other approved procedures

Reviewing and verification of Construction Method statements to assure that it is meeting the Scope of work, Schedule Q, Project Specification, Mandatory Saudi Aramco Engineering Requirements

Preparation and Verification of ITP’s, SAIC’s, SATR’s and Pre-Commissioning forms related Electrical

To provide and conducting Quality Tool box meeting and Quality orientation for Construction crew for on-going and upcoming construction phase activities

Routine site surveillance for foreseeing the potential deficiencies which must be tackled accordingly to avoid Non-Conformities.

Documentation Control, Preparation of RFI, conducting pre-inspection, Assisting Qc inspector for inspection and Testing of Dry type transformer &lighting distribution panel Ensuring Project Quality as per standards.

Coordinate with client representatives regarding the Implementation of quality procedures, safety compliances and quality of works.

Perform Inspection for Hold, Witness points & Review, Approval of test records of all activities pertaining to Electrical & Instrumentation.

Ensuring that inspections are completed in accordance with requirements defined in Project Quality Plans.

Survey at field and the activities, resolve the technical construction and quality issues, when ever occurs.

Involve in Motors test for insulation resistance and winding resistance of the motor, termination of the motors, Solo run test ( pre commissioning )

Verifies installation in accordance with relevant procedure and standard drawings and to record any defects on punch lists.

LV Motors:

Perform installation of Motors as per approved drawings

Perform the testing of Motors as winding resistance test, insulation resistance test, phase rotation test, earth impedance test of motor earthling, No-Load & Load and Solo Run Test of Motors.

UPS System:

Installation of UPS, Battery Chargers, and Storage Batteries etc. is in accordance with project specification and approved drawings.

Charging and Discharging test for the batteries

Low Voltage Activity:

Low voltage installation of Cable Trays, Trunkey’s for Lighting System, Fire Alarm system, Conduit Installation

Perform & confirm that all equipment testing & commissioning conform to National & International Standard, such as NEC, IEC & Project Specification

2. Client : Saudi Aramco(Saudi Arabian Oil Company)

Company : Shandong Electric Power Co.(SEPCO)

Project : JIGCC Powerblock Project (Package -4)

Position : Qa/Qc Inspector – (Electrical)

Duration : Nov 2015 To March 2019

Roles and Responsibilities:

Working Under the project(BI-10-015**-****) with Aramco JIGCC-power Block Package.

Closely monitoring that all activities were executed and implemented in accordance with Schedule-Q, MSAER’s, Project Quality Plan and applicable Contractual requirements

Pro-Actively addressing all quality issues and concerns for all upcoming activities

Active participation and contribution for continual improvement to increasing quality, productivity and progress per client requirements

Review and approval of inspection record book and Inspection disposition report in timely manner.

Functionally reporting and assisting to the QCM and QAM.

Provides Quality technical support for any Quality issues that may occur during the course of the Project

Performing duties and responsibilities as per Schedule Q, PQP, I&TP and as directed by PQCM.

Reviewing and verification of Construction Method statements to assure that it is meeting the Scope of work, Schedule Q, Project Specification, Mandatory Saudi Aramco Engineering Requirements

Preparation and Verification of ITP’s, SAIC’s, SATR’s and Pre-Commissioning forms related Electrical

To provide and conducting Quality Tool box meeting and Quality orientation for Construction crew for on-going and upcoming construction phase activities

Routine site surveillance for foreseeing the potential deficiencies which must be tackled accordingly to avoid Non-Conformities.

Reviewing and verification of Construction Two Week Look Ahead Schedules and Preparation of Inspection Two Week Look Ahead Schedules to submit every week to Saudi Aramco.

Documentation all Violations and issuance of Internal Non-Conformance Reports ( INCR’s ) and shall forward to Saudi Aramco records within 48 hours of issue date

To ensure and notify SAPID to Re-Inspect in accordance with the Aramco approved procedure and Corrective Actions implemented to eliminate Non-Conformance and Final closure of INCR’s.

Daily Reviewing the QMIS E-Log Book Entries Standard Violation, Pro-Active Notification and General Comments issued by the Saudi Aramco and co-coordinating with all team members for response and resolution to closeout.

Daily Reviewing the Saudi Aramco NCR and Agreed Completion Date for Violation LBEs issued by the Saudi Aramco and co-coordinating with all team members for resolution

Coordination and Communication with Client Inspectors for getting feedback for open LBE’s, SANCR’s, RFI’s, EIL’s / Punch list’s for successful closure in the QMIS and MPCS system.

Attending Weekly Quality meeting with Saudi Aramco and other departments.

Attending Internal Co-ordination Quality meeting with Quality Department and other departments.

Reviewing and verification of Minutes of Meeting

Ensuring and verification of Contractor supplied materials and equipment’s visually inspected to identify Damages/Defects and any Non-Conformance against client requirements prior to client Inspection.

Review of IFC drawings, Design calculations and other Documents to identify any conflicts, Violation and Design error against MSAERs

Ensuring and updating the RFI Log status for completed, on-going and upcoming construction phase activities

Ensuring and updating the INCR Log status on daily basis.

Ensure and Review of Inspection e-Log every working day and respond to all comments to the satisfaction of the Client Representative within 24 hours of entry date.

Installation and Pre-commissioning/Functional testing of:

Auto Transformers (380KV/132KV/230KV,)

Generator Step up Transformers (18KV/23KV/380KV)

Power Transformers (380KV/132KV/230KV 13.8kv/4.16Kv,13.8/0.48kv),N.G.R,

Switchgear( 380KV 230KV,132KV GISSUBSTATION)

Switchgear( 13.8KV SUBSTATION) and MCC 480V

M.C.C(4.16KV,480V),Relay Control Panel

UPS/Battery charger-Battery Bank, Dry type transformers, HVAC Control panel, Disconnect Switches,

Fire alarm panels, Low voltage Power distribution panels, Lighting Power& control panels,

Instrument Power panels, AC/DC Panels, Manual by pass switch, Welding Switch boards, Remote control panels, lighting system inside buildings and outdoor type, Cable trays(Channel, Ladder, Perforated) & supports, Conduits,

M.V & L.V Induction Motors, Variable Frequency Drives, Skid electrical equipment’s

Installation of generator step up transformers 18kv /380kv,380/230,132KV auto transformers 115/13.8kV, 13.8kV/4.16kV Distribution Transformers as per approved Drawings and make As-Build if any deviation to the installation.

Installation and Pre-commissioning/Functional testing of:

GIS Switch Gear :

Installation of Circuit Breaker, Voltage Transformer, Current transformer, Disconnector & Earthing switch and Density Gauge, Gas insulated BUS etc. is in accordance with project specification and approved drawings.

Vacuuming & filling SF6 GAS, SF6 GAS Test, Circuit Breaker Timing Test, DS/ES Timing Test & HI pot test(10KV)

Voltage Transformer & Current Transformer Testing, Leakage Test Different Compartment, Density Gauge Pressure Test & HV Test, Protection panel & LCC Panel for Testing for GIS Switch Gear

HV/MV/LV Transformers:

Winding Resistance, Ratio test, dielectric test, transformer impulse test, Vector group for Power Transformer, Vacuuming, oil filling & testing of transformer

Performing & Pre-commissioning of Motor Controlling Centre (MCC’S) which includes MCCB (instantaneous or thermal) trip testing, Insulation resistance testing, shunt trip testing, Contact resistance testing, overload relay testing, ground fault relay testing.

Perform control power transformer (CPT) testing, voltage ratio testing of CPT, winding resistance testing, Auxiliary relays testing, Functional Testing, Ground fault Relay Testing, Over Load Relay testing for MCC’s.

Perform the Testing and Pre commissioning of all types of Circuit Breaker like ACB (Air Circuit Breaker), MCCB (Molded Case Circuit Breaker), Vacuum Circuit Breaker, and MCB and also all types of relays used in MCC’s, Switchgear.

Witness Point to Point Checking for Switchgear, Interlock Testing, submitting defects list if any to Vendor for rectification.

Perform the witness activity for Relay Primary & Secondary Current injection Test

MV/LV Motors:

Perform installation of Motors as per approved drawings

Perform the testing of Motors as winding resistance test, insulation resistance test, phase rotation test, earth impedance test of motor earthling, No-Load & Load and Solo Run Test of Motors.

UPS System:

Installation of UPS, Battery Chargers, and Storage Batteries etc. is in accordance with project specification and approved drawings.

Charging and Discharging test for the batteries

Low Voltage Activity:

Low voltage installation of Cable Trays, Trunkey’s for Lighting System, Fire Alarm system, Conduit Installation

Perform & confirm that all equipment testing & commissioning conform to National & International Standard, such as NEC, IEC & Project Specification

3.Client :Kemya, (SABIC)

Company: Nasser Al Hajiri Corporation (N.S.H)

Project : Saudi Elastomer Project (Epdm&Pbr)

Position: Qa/Qc Inspector – Electrical

Duration: March 2015 to Nov 2015.

Roles and Responsibilities:

Having knowledge about the SABIC Engineering Standards (SES), Material Standard Specification, Typical Inspector Plans and Inspection Checklist. Inspect new and existing wiring and electrical installation to determine that installations conform with approved plans and or applicable electrical codes and ordinances.

Preparation of Quality Plans according to Inspection Test Plan with respect to project specification

Ensure the correct implementation Carrying out Inspection activities in accordance with Inspection and

Test plan.

Expedition & inspection on vendor works, Pending issues from vendor and sub vendor, engineering

drawing issues, follow up the status of sub orders materials & follow-up Electrical schedule.

Inspection of the items the entire electrical items, dimensionally and visually as per data sheet.

Review all necessary documents required for the turnover of the project package. Involved in installation and pre-commissioning of the motors, Lighting, HVAC, Dry type Transformer, cable trays, and conduits works.

Performed Inspections & testing of Breaker, transformer, HVAC panel space heater, motors from Erection up to energization of the whole system with vendors and third party with active participant.

Performed Inspections, testing and proper documentation to ensure correct and proper installation of

electrical systems which includes wiring termination, meggering functional checking of switch gears, bus

bars, motors.

Assisting QC Inspector in regular and timely raised RFI’s to conduct and verify technical inspections as required by ITP’s and IFC drawings and give way to QC in charge to take his final decision.

Assisting QC Inspector in Inspection and testing of Continuity and Insulation Resistance for MV/LV Electrical motors, MV/LV cables installed, Hi-Pot testing of MV Cables and cable bus, earth resistance test for ground rods and torque testing in the field or process area.

Coordinate with client representatives regarding the Implementation of quality procedures, safety compliances and quality of works.

Perform Inspection for Hold, Witness points & Review, Approval of test records of all activities pertaining to Electrical & Instrumentation.

Ensuring that inspections are completed in accordance with requirements defined in Project Quality Plans.

Survey at field and the activities, resolve the technical construction and quality issues, when ever occurs.

Involve in Motors test for insulation resistance and winding resistance of the motor, termination of the motors, Solo run test ( pre commissioning )

Verifies installation in accordance with relevant procedure and standard drawings and to record any defects on punch lists.

Monitoring the QA/QC documentation of contractors and ensure that all the activities are incorporated to their system on daily basis and can be traced according to our requirements.

performed Inspections, testing and proper electrical systems such as distribution panel, Transformer, Lighting,

Reports daily Inspection activities QA/QC department and maintaining various data records update.

Preparation of site requirement materials & site materials arrived program schedule

Monitoring daily Electrical installation and testing activities and verifying that it complies with the project specification.

Preparing daily documentation of the work progress.

Review design and specification related to the project to confirm to client specification.

4.Client : Saudi Aramco (Saudi Oil Company)

Company: Multiline Electrical&Mech.Est

Project : Manifa Causeway &offshore project

Position : Qa/Qc Inspector – Electrical

Duration: Oct 2014 to March 2015

Roles and Responsibilities:

Working under the project (BI-10-004**-****) with Drill site Miscellaneous Services.

Performs QA/QC Inspection and Supervision activities representing the contractor to ensure that all Electrical and Instrumentation construction works are carried out in accordance with IFC drawings, Saudi Aramco Standards and Specifications, International Standards, applicable regulations and approved ITPs.

Liaise between the Construction and Contractor Engineering & Pre-commissioning Teams (including Vendors).

Monitor, check and sign-off Instrumentation completion dossiers and Inspection & Test Records (ITRs)

As-built drawing by Contractor review, verification and approval.

Participate in approval of proposed resolutions and monitoring completion of corrective actions to close non-conformances (NCR).

Ensures that Safety Policies and Procedures are applied diligently to all E&I work, including by other discipline.

Prepare System Punch List prior to issuance of SMCC (System Mechanical Completion Certificate).

Assist in maintaining the punch list and verification of items completed.

Walk through and surveillance activities. Project Documentation works.

Establish close communication and teamwork with other disciplines to ensure overall project successful completion.

Ensure the Implementation of Project Quality Management System according to requirements of ISO 9001:2000 at different stages of project construction activities.

Review & approval of Contractor's Inspection & Test Plans, Procedures, Work instructions and Vendor's Quality submittals.

Material receiving inspection and its certificates review for compliance with applicable project specification requirement.

Well versed in International Industry Codes & Standards (NEC, NFPA 70, IEC, NEMA etc), Specifications related to Intrinsically Safe systems and Electrical systems for Instrumentation.

Responsible for guidance and verification/inspection of the entire scope within discipline, reporting to the E & I QC Supervisor/Manager.

Provides technical information to Department Director regarding request for variances from the construction code.

Perform Testing on Drum before proceeding to the installation of cables and submitting the results.

Perform MV/LV Cable Laying, Dressing, Glanding Insulation Resistance and Continuity testing before Termination of the Cable and follow the final Termination inspection by considering applicable standards and Specifications. Also splicing of the cable as per manual instructions.

Inspect the installation of Direct Buried Cable, Direct Buried Cable with PVC Coated RGS Conduit, and Direct Buried Cable with PVC Conduit, Duct Bank in Trench.

5.Client : Ma’aden Aluminium Company

Company : Samsung Saudi Arabia co.

Project :Ma’aden Steam Plant Project

Position : Qa/Qc Inspector – Electrical

Duration : May 2012 to Sep 2014

Roles and Responsibilities:

Preparation of Quality Plans according to Inspection Test Plan with respect to project specification

Ensure the correct implementation Carrying out Inspection activities in accordance with Inspection and

Test plan

Expedition & inspection on vendor works, Pending issues from vendor and sub vendor, engineering

drawing issues, follow up the status of sub orders materials & follow-up Electrical schedule.

Inspection of the items the entire electrical items, dimensionally and visually as per data sheet.

Monitor and inspection of equipments which are installed (distribution system) to ensure the continuous

power supply.

Meggering and continuity to be done again after laying of cables Dressing and Splicing of cables

Terminate the core with proper lugs and overall cable laying and termination.,

Performed Inspections, testing and proper documentation to ensure correct and proper installation of

electrical systems which includes wiring termination, meggering functional checking of switch gears, bus

bars, motors, transformers, battery/ups, fire alarm panel.

Works within established structures, procedures, engineering standards and methodologies developed to

be implemented by the project.

Monitor the Underground installations; check the required burial depth and spacing requirements to adjacent installations, prior to backfilling.

Working with analytical, interpretative and constructive thinking with a degree of evaluative judgment in some construction implementations.

Issuing log book entry if found any deviation/violation to the standards during surveillance of the work.

Providing suggestion and assisting Engineers and supervisors regarding Electrical works in Substations, Compressor area and process area to meet the quality standard.

Documentation Control, Preparation of RFI, conducting pre-inspection, Assisting Qc inspector for inspection and Testing of illumination of lighting, circuit breaker, Ensuring Project Quality as per standards.

Coordinate with client representatives regarding the Implementation of quality procedures, safety compliances and quality of works.

Survey at field and the activities, resolve the technical construction and quality issues, when ever occurs.

Review all necessary documents required for the turnover of the project package. Involved in installation and pre-commissioning of the motors, ups, fire alarm systems, cable trays, and conduits works.

Involve in Motors test for insulation resistance and winding resistance of the motor, termination of the motors, Solo run test ( pre commissioning )

Responsible for the over-all implementation of Quality Control related electrical works accordance with project specifications and Engineering Standards.

Verifies installation in accordance with relevant procedure and standard drawings and to record any defects on punch lists.

Issuing NCR’s when the contractors noted non-conformity activities& Preparation of final completion punch lists A, B and C

Verification of closed punch items and conduct walk through for each completed piping system prior to mechanical acceptance

Monitoring the QA/QC documentation of contractors and ensure that all the activities are incorporated to their system on daily basis and can be traced according to our requirements.

Reports daily Inspection activities QA/QC department and maintaining various data records update.

6.Client : Ma’aden & Alcoa

Company: Kumyang Electrical Co.

Project : Ma’aden Rolling Mill Project

Job Title: Qa/Qc Inspector – Electrical& Instrument

Duration: November 2010 to April 2012

Roles and Responsibilities:

Monitoring daily electrical and instrumentation activities and verification for compliance to Clients specification.

Perform quality control inspection and related QC work activities in accordance with the approved Project Quality Control Inspection Plan.

Preparation of daily quality control documentation including acceptance documents to completed and tested plant facilities as per approved Quality Assurance and Quality Control Procedures.

Ensures the completion of all inspected reports and relevant quality control documents are available and completed as specified in the quality control inspection plan and requirements parties signatories appended.

Incoming material inspection in accordance with applicable standards and purchase order for the additional requirements.

Generate client Requests for Inspection (RFI) where required providing sufficient notice for Hold, Witness and Inspection points.

Inspection of electrical equipment’s, cable tray, power cables, lighting layout etc.

Installation and Inspection of power, control, instrument cables, cable trays, conduits, junction boxes etc.

Inspection of receiving materials & raise N.C.R. if any nonconformance is found.

Carried Out tests such IR test (Meggar), Hi-Pot test, Continuity, Solo-Motor Run tests.

Make site inspection to check the installation as per approved design and standards.

Involved in Conduit & Cable tray installation & Inspection work.

Involved in Power panel, Local Control panel, Distribution panel installation work.

Involved in Motor installation (IR test, Winding Resistance test, Hi-Pot test, Solo Run test – rotation check, vibration check, bearing temperature check, RPM check and Functional test).

Instruments calibration (PT, TT, PG, Pressure switch, TSV), Installation, glanding, termination & commissioning.

Installation of Cabinets and consoles, Instrument cable termination according to given standard drawings,

Junction Boxes installation as per given and typical drawing.

Review the calibration status of any test equipment being utilized on the project ensuring the equipment is within calibration prior to use.

Supervising the testing of cables and insulation resistance measurement.

Responsible for the inspection of installation of Instruments, Conduits and fittings (above and below ground), Cable trays/ladder racks and Cables, Junction Boxes, Control Panels, Consoles, wiring termination, impulse tubing as per the project specification.

Implementing coverage of proper installation, wiring and cable laying, cladding, termination, witnessing of insulation resistance test and hi-pot test.

Maintain good record keeping of activities carried out and inspection reports, surveillance reports, etc.

Invite client/contractor for witness and hold points in Inspection/Test.

Acceptable and deficient works found at the time of inspection.

Tracking and recording of ‘Request for Inspections’ (RFI’s) and work progress on site.

Co-ordinate with sub-contractors works execution, track quality of work executed through proper inspection.

Monitoring the work and to see that the work is carried out according to the given standard installation drawing.

Attend all necessary inspections as identified in the approved Inspection and Test Plan (ITP).

Prepare Inspection format, field inspection checklists, Request for inspection (RFI) and QA / QC Policy to be implemented during the course of installation and Erection.