Electrical Engineer

RESUME

NAME: UCHECHUKWU CHIBUEZE NWUFOH

NAME OF PROPOSED POSITION: Electrical QA/QC Inspector

AGE : 33 YEARS

Total Experience: 7 YEARS

Sex : MALE

Nationality : NIGERIA

Contact No: 050*******

Email ADDRESS: ***********@*****.***

QUALIFICATION

ACADEMIC / EDUCATION QUALIFICATION

2012: Nnamdi Azikiwe University Awka, Anambra State, B.Sc. Electrical Electronics Technology

2006: Rhoda Heartfelt Secondary School, Akpajo Rivers State. Senior Secondary School Certificate Examination (SSCE)

2000: Igwebueze Nursery and Primary School First School Leaving Certificate (FSLC)

2014: Mandatory National Youth Service (NYSC)

2014: Basic Mandatory (STCW)

2015: Motorman

2016: International Ship and Port Facility Safety (ISPS)

2016: Certificate of Competence (COC)

2017: Gasos Trained and Certified ADCO JP/JO PTW 2017-2020

2017: TUV-NORD Trained, Task Risk Assessment (TRA) 2017

2017: Safety Zone and Consultancy Trained, Confined Space Awareness 2017 – 2020

2018: TUV-NORD –NEBOSH- Process Safety Management

2019: ISO 9001- LEAD AUDIT

2019: QA/QC MANAGEMENT

2020: GULF COAST CERTIFIED: HV/MV/LV Electrical Equipment Tester

2020: ALISON

Critical Facility and Critical Infrastructure

Critical facility power supply management

Introduction to basic electrical wiring system

Introduction to electrical drawing and test equipment

SUMMARY OF EXPERTIS

An industrious Electrical Electronics professional with more than 6(Six) years of experience in both Private and Multinational Oil and Gas, Petrochemical, Power and General Construction and Pipeline companies as supervisor /Job performer in Mobile network Telecommunication tower construction, pre-commissioning and commissioning and Maintenance Work activities

KEY PROJECTS & POSITIONS HELD

Position

Project

Period

ELECTRICAL/INSTRUMENT QC INSPECTOR (CPECC)

BAB INTERGRATED FACILITY PROJECT

(BIFPADNOC) CONTRACT NO16376.01

AUG 2018- FEB 2020

ELECTRCAL/INSTRUMENT QC INSPECTOR (CPECC)

MENDER FULL FIELD DEVELOPMENT

PHASE 1(ADCO) PROJECT NO P23001

MAY 2016 – JULY 2018

ELECTRICAL/INSTRUMENT JOB PERFORMER

MENDER FULL FIELD DEVELOPMENT PHASE 1(ADCO)

FEB 2014-2015

Supervisor.

NOSKY ENGINEERING SUPPLYS. Nvuigwe Power Transformer Installation. Rivers state

2013

3rd Engineer

FYMAK MARINE AND OIL SERVICES LIMITED. Lekki Lagos, Nigeria

2010 2012

EXPERIENCE:

sound knowledge in cable laying (underground and surface) FOC, High Voltage, medium, and low voltage cables and installation of instrument support stands.

Valuable experience on Transformer installation, Pre energising and Energising activities

Familiarised with circuit breakers, isolators, switch gears, earth switch and lighting transformers

Familiarised with generator transformers and heavy engine electronics

TEST KIT FAMILIARITY

AEL make AC high voltage test kit

HL/LT Megger

Micro ohm meter Scope & MOM600A

Primary injector testers

Heavy duty engine actuators

Electronic fuel pumps(heavy duty engines)

Cathode Ray Oscilloscope(C.R.O Monitors)

Earth Resistance Test

Residual current drive test kit RESPONSIBILITY

Operation, maintenance, testing and commissioning of HT/LT panels

Primary Injection testing and secondary injection testing for circuit breakers

Tested up to 12.5MVA TRANSFORMERS

Testing and commissioning of Bus bars, rising mains, earth pit

Managing over all involved in erection of instalments, testing, pre commissioning and maintenance of various electrical equipment’s

Testing and maintenance of Actuators

Execution of work as per drawings and also modification and condition of site

Attending review meeting and reporting daily work progress to authority in charge

Making relay settings using client specification

Planning schedules for subsequent jobs.

CHINA PETROLEUM ENGINEERING AND CONSTRUCTION COPERATION

Project: BAB INTEGRATED FACILITY PROJECT

CLIENT: ADNOC (Abu Dhabi National Oil Company)

DESIGNATION: Electrical / Instrument Inspector

Accountable for developing and obtaining approval for project quality document such as project quality plan, QCI procedures, inspection test plan (ITP) in accordance with project specification

Maintaining quality standards on site and correlating with contractor counterparts to resolve day to day issues.

Assessing quality documents of sub contractors and attending work coordination meetings on site

Leading inspection and test activities as per approved ITP’s in accordance with third party

Sustaining an updated calibration list of measuring instrument

Organizing site quality meetings in coordination with project manager or other relevant bodies

Conduct inspection on all electrical and instrumentation construction or installation activities

Enforcing quality management system as laid down by the cooperate QHSE Manager

Analyse information obtained from inspections and compare with applicable standards and codes

Inspection and testing of all underground Earthing network for motors, switchgears, steel structures of sub station.

Monitoring of high voltage, low voltage, control and instrument cables termination and IR/Continuity testing

Liaise with company Engineering and pre commissioning team together with vendors to check and sign off E&I completion dossiers and inspection test records.(ITR’s)

Prepare CAR’s or NCR’s found at site and ensure that they are fully rectified and satisfactory

Responsible for daily site surveillance and log book entry for site discrepancy

Conduct surveillance inspection and report if non conformance and violation of project standard is noticed

Daily site surveillance of electrical/ instrument works which are in progress and confirming if they are in accordance with clients specifications, details, and drawings

Ensure that all installations have been carried out in accordance to project specifications and standard

Ensure that safety rules and regulation of the project is upheld

CHINA PETROLEUM ENGINEERING CONSTRUCTION COPERATION

PROJECT NAME: Mender Field Development Phase 1

CLIENT: ADCO (Abu Dhabi Company of Onshore Oil Operation)

DESIGNATION: Electrical/Instrument QC Inspector

Responsibilities

Sound knowledge of International standard/Area classification

Ensure that documentations generated by sub contractors inspections, request for inspection checklist, and test surveillance meets the requirements of project quality plan

Scheduling and carrying field inspections as per approval ITPs. Final sign off of all QC checklist.

Site visitation to ensure that work is being carried out according to current revisions of drawings and specifications.

Inspection schedule coordination to AOL/owners engineers inspectors.

Verification of all materials, equipment’s and cables are in accordance with specifications/Ratings, installation procedure and shop drawings have been approved before the installation activities.

Preparation of method statement, ITP and testing procedure format as per ITP consisting of standard installation and testing procedure of project specification.

FIN/FIR receiving monitoring control.

Discussing construction quality inspection status and results, if requirements are been met.

Attending to AOLs comments and closing of issued SOR/CAR/PAR/NCR

Discussing priorities and non priorities scope and activities.

Monitoring of site in areas that involves the safety and protection of installed equipment’s/devices and other materials that are kept within construction area.

Ensure that all instruments and cable have been installed, tagged, aligned, and correctly wired in accordance with requirements of the approved drawing, manufacturer’s instruction and specifications.

Ensure the completion of all documentations reference testing, inspection, recording, and reporting.

Issuance of CAR/SOR/NCR to non conforming works and activities that are carried out on site.

Inspection work status report update and monitoring complete work against remaining work.

Ensure that test equipment required has been calibrated in accordance with the specification of the relevant standards and specification, also ensure that test is carried out with respect to safety procedures;

Reviewing the instrumentation scope of work, drawings and executing the construction and maintenance activity in line with project specification and standards.

Prepare request for inspection to clients and inspections of acceptance of installations and testing.

Coordinate quality procedures for construction department, project management and client inspectors and corrective actions for client inspection comment/punch list.

Preparation and checking of termination drawing, instrument loop schematic and wiring diagrams I/O list, cause and effect diagram, fire and gas detection drawings P&ID drawings logic diagrams.

Responsible for clearing the technical queries with consulting client engineer and design department.

Planning/scheduling information and Man hour estimates to complete the instrumentation scope works.

Coordinating with sub contractors for various construction and material issues

Coordinating with vendor/supplier on procurement of materials

Preparation of MAS (Material Approval Sheet).

Preparation of daily, weekly, monthly progress report.

Prepare the action list for weekly design and procurement meeting.

Prepare monthly progress report and progress presentation.

Planning and scheduling the 3 week program.

Coordinating with site supervisor to ensure that, installations, termination and testing of field U/G & A/G conduits, cable trays and tubing for instruments

Supervision of installation and termination and testing of MV SWGR, LV MCC and transformers installations.

Liaising with site supervisor on installation and calibration of instruments, such as, transmitters, pressure switches, level switches, control valves, temperature sensors, fire and gas detector, mass flow meters, radar tank gauging, motor operated valves (MOV).

Preparation and checking of hook up drawings for field instruments, instrument location and cable routing diagram, instrument duct/trench layouts, cable routing layout, control room layout and cable schedule.

Preparation of hand over document.

CHINA PETROLEUM ENGINEERING CONSTRUCTION COPERATION

PROJECT: MENDER FIELD DEVELOPMENT PHASE

DESIGNATION: ELECTRICAL / INSTRUMENT Supervisor

LOCATION: MENDER

CLIENT: ADCO (Abu Dhabi Company of Onshore Operation)

Responsibilities

Conducting tool box talk prior to start of work.

Enforcing strict adherence to laid down safety regulation

Attending TRA meetings

Ensure that all documents regarding permits are onsite and updated

Reminding workers of their individual responsibilities

Ensure that right tools are used to carry out specific activities

Link between workers and management and also management and clients

Ensure that all worker are working safe by providing right PPE for day to day activity

Ensure that materials are not wasted

Ensure that jobs are carried out according to specification from QC and engineers

Provide basic amenities on site

Ensure that each activity being carried out is in adherence to Method Statement and TRA

NOSKY ELECTRICAL ENGINEERING NIGERIA LIMITED

DESIGNATION: Site Supervisor

Location: Port Harcourt Rivers State

CLIENT: Obiokpor local Government

DURATION: Sept 2012 May 2013

Responsibilities:

Logistical involvement in procurement and transportation of Transformer from ware house to site location.

Supervision of Loading and offloading of transformer from warehouse to site location.

Inspection of concrete pad of base 8ft by 9ft and 10in thickness.

Acceptance test and damage inspection.

Oil leakage test through bushings, gaskets, or welded joints.

Supervision of transformer lifting operation, to ensure that it is lifted in a gentle manner during upward lifting

Ensuring that transformer height reaches required standard (IEC)

Supervision of Insulation resistance test (IR) using a 1000v megger unit.

Ensure that protective coatings on terminals are not tampered with to prevent oxidation of transformer terminals.

Ensure that washers are not installed between terminal lugs and bus bars to prevent over heating of connections.

Ensure that only UL lugs are used.

Ensure proper spacing of cables

Ensure that the required standard are followed for sound control.

Supervision of grounding process following NEC recommendations and also ensuring that neutral wires are also grounded as applicable.

Supervision of continuity test.

Pre Energizing of 3 phase electrical transformer line to ground and line to line voltages.

FYMAK MARINE AND OIL SERVICES NIGERIA LIMITED.

DESIGNATION: Third Engineer

LOCATION: Lagos Nigeria

CLIENT: Exxon Mobil

Responsibilities

Daily Pre starting and starting operation, daily routine checks, carrying out maintenance jobs

Draining of compressor tank.

Monitoring of air filter gauge to ascertain when it is due for change.

Monitoring heat exchanger gauge or meter.

Servicing of pneumatic pumps.

Monitoring oil pressure.

Monitoring gear oil pressure.

Monitoring water pressure.

Changing or servicing of jet solenoids.

Servicing of engine actuators.

Changing of vessel horn bottle.

Operating water hydrant from vessel bridge.

Fault findings with indicators in the bridge and rectifying them.

Monitoring gear box pressure

Servicing of air blowers (both ventilator and extractor)

General servicing of engines and auxiliaries

Maintenance of engine control module(ECM)

Maintenance of jet module control (JCM)

Rectification of JCM and ECM errors

Setting of spool valve with the aid of the JCM

Changing of auxiliary intercooler

Servicing of engine air starter or kick starter

Changing or replacement of lighting appliances

COMPUTER SKILLS:

• Microsoft Word, Outlook, Internet, etc.

PERSONAL SKILLS & ABILITIES:

Vibrant, optimistic and always open to new ideas. Adaptability and optimum dedication to work, ability to correlate with people diplomatically, and willingness to learn.

Contact this candidate