Engineer Inspector

KEY SKILLS

QA/QC INSPECTOR

B BERBIN JOSE

Mobile no : +974-********

Email Id : **************@*****.***

Career profile

Experienced Field QA/QC Inspector/Engineer with over 5 years of experience in project execution, Piping and Quality Control looking for a long-term association with an organization driven by excellence, innovation and fastening the growth of courage, conviction and work content. WORK EXPERIENCE

Quality Inspector [Mechanical]

Prime4Inspection in Dubai ( 2 years)

Urbacon trading & contracting( UCC ) in Qatar ( 1.5 yrs)

Fernas construction company incorporated in Qatar in Jan 2019 to still date SUMMARY OF EDUCATION

Bachelor’s Degree in Mechanical Engineering ( B.E) in 2015 from Anna University,India.

Higher Secondary Education (12th) from st’marys high school in2011.

Matriculation (10th) passed from st’ignatious high school in2009. TECHNICAL QUALIFICATIONS

o CSWIP 3.1 CERTIFIED WELDING INSPECTOR[708522]

o ASNT NDT LEVEL II INSPECTOR in UT, RT, MPT &PT.

Technically carrying out inspection Before Welding, During Welding, After Welding and in Case Repairs such as Specifications, Weather Conditions, PWHT, Repair Procedures etc.

Facilitate the coordination of required verification information between the Client Representative, Client and project personnel.

Ensure the integrity and legal compliance of the material by engaging and working with, Client Representative, Client and project personnel.

Review and approve Supplier/Subcontractor Quality Control Plans/Inspection Test plans and procedures.

Coordinating the total project erection with the supervisors and foreman.

Carrying out material inspections such as Welding, Painting, Structural.

Carrying out Painting Inspection and DFT check for different coats such as Primer, Mida coat& Topcoat.

Inspecting and coordinating the piping erection activities along with fit up inspections and documentation in P & ID& isometric drawing.

WORK EXPERIENCE

Weld. Visual inspection and RT film interpretation.

Witnessing NDT activities, RT, LPT, and DPT.

Preparation of AS BUILT DRAWINGS according to the client’s scope.

Coordinating the loop inspections and witnessing the pressure test like Pneumatic testing and Hydro test as per the line designation table

Qualification of welders and monitoring the performance. Designation : QA/QC INSPECTOR

Company : Fernas construction company incorporated. Major Responsibilities

Working in the field of construction and in-service inspection of piping, pipelines, above ground storage steel tanks, pressure vessels, and steel structures.

To implement effective service, product verification and inspection programs that are procured by the client with consistent critical assessments, contractual and regulatory obligations.

Carrying out of Material receiving inspection as per packing list & specifications, correlate Mill Test Reports (MTR) of vendor and company supplied material as per Engineering / Project Specifications.

Arranging the RFI to appropriate inspectors and prepare reports.

Working with the Project Quality Control Team to ensure standards, procedures, inspection test plan and project specification have complied.

Welding procedure and welder performance qualifications.

Material verification by reviewing the MTC’s and carrying out material inspection (visual, PMI & laboratory tests) for traceability, dimensions, surface quality and mechanical chemical properties.

Fit up inspections for weld joints, weld visual inspection, and final dimensional inspection

Weld map and radiographic test sketch review, and radiographic test film interpretation (RTFI).

Good knowledge & experience with flange management or bolted joint integrity management.

NDT (RT, UT, MT, & PT), laboratory destructive test, hydro test, pneumatic test, vacuum test, stud welding inspection and bolt tightening torque inspection. Raise NCR (Non-conformance report) for the violation found during the inspection and monitor deviations from project specification, quality control plan, method of statement, and ITP.

To review NDT Documentation issued by the Contractor and Subcontractors.

Witness NDT activities based on the Quality Control Plan (ITP).

To qualify, when applicable specific NDT technic.

To validate, Contractor NDT personal by testing.

Follow up the NDT activities and insure proper records (NDT/inspection records follow-up).

Review and interpret all or part of radiography films in addition to the third party interpretation.

Perform UT Cross Check on critical welds.

Review and approve the different NDT inspection reports issued by the Contractor on a daily basis.

Monitoring of NDT subcontractor and Contractor inspectors qualification and performance.

Preparing the final test pack and commissioning RFPC & MCC dossier and close out.

To coordinate with the client for Inspections related to NDT and Mechanical Laboratory test including tensile tests, bend tests, fracture tests, impact tests, macro-micro, and hardness tests.

Respond to enquiries for inspection, send quotations, raise P.O and coordinate with the finance department for invoice activities.

Witnessing manual & instrument critical valve leak passing test and inspection for pitted flange raised face after machining.

Witnessing pressure test with specified medium with test pressure as per approved master line list.

Prepare weekly reports for RFIs, fit up & welded joints, weld summary with concerned NDE reports & repair percentage as per materials wise (Low Temp, SS & SDSS).

Co- ordinate & attending meeting with client representatives.

Review the MFD and close out.

Designation : QA/QC Inspector (Piping, Welding)

Company : PRIME4INSPECTION.LLC

Major Responsibilities

Planning all minor and major activities and preparing daily reports.

Coordinating with the client’s technical department and preparation of As built drawing, site modification, site progress etc.

Fit-up and welding inspection at fabrication and making reports.

Prepare pre-hydro test punch list and coordinate with construction team to rectify it as soon as possible.

Conducting Reinstatement walk downs with client and prepare punch list.

Quality documents as welding reports, test packages, Hydro testing, WPS etc.

Making material identification reports according to the purchase order, review material, test certificates and parameters with codes with the standard and review it by TPI and CA.

Inspection of welding processes.

Painting inspection and consuming usage.

Inspecting and designing the manufacturing of columns for pipe supporting.

Conducting NDT activities such as PWHT, Hardness etc.

Reviewing of PWHT charts.

Reviewing Hydro test Packages for NDT coverage as per line class and issuing punch items after field verification on lines that are within the test limits into categories before and after testing.

Verifying punch items cleared and approving packages for final release for testing.

Witnessing Hydro/Visual test, Pneumatic/Service test, Bolt Torque & Tensioning as applicable.

Reporting for any discrepancies/malfunctioning/violations & issuing Sit Visual inspection of fit ups prior to the welding

Inspecting the materials as per ASME section II parts A,B,C

Assuring of only qualified and approved welders for available jobs by periodical checkups

Selecting suspect weld joints for required NDT, Verifying repair jobs on field, inspecting for any damage to materials and taking suitable corrective action

Inspecting for cleaning of spools after hydro testing and before erection in case of flanging connections.

Preparing the final test pack and commissioning RFPC, MCC, equipment handover

(EOHC) & PSSR dossier and close out

Designation : QA/QC Engineer

Company : URBACON TRADING & CONTRACTING WLL

Major Responsibilities

Attend the quality management meetings

The preparation and control of project quality system management documentation prior to project commencement

Review quality inspection personal qualifications and training requirements

Monitor the disposition of all issued nonconformance reports.

Monitor the progress and effectiveness of the project quality management system. Recommend and implement improvements when required.

Coordination all QA/QC activities with the site QA/QC procurement manager

Coordinate all quality related correspondence with the customer representatives.

Monitor statistical method reporting.

Action and close all customer complaints.

Attending the internal & external inspection

Following up MIR, WIR

Monitoring & inspection of executive of steel structure works pertaining to main pipe rack, unit pipe racks, equipment structures, optical silo, sub pipe racks & compressor shelter as per the approved drawings & specification.

Attending to RFI’s raised by concerned at various stages of inspection and for various activities(Pad plate inspection, fit-up & welding, NDT inspection, Alignment, Bolt tightening, grating fixing, handrail erection, etc.

Release of structure to preceding department after inspection.

Resolving technical discrepancies arise on site in consultation with senior.

Inspect structure with reference to various tolerance and specifications and also ensure usage of appropriate material sections, fasteners and consumables being used.

Inspect fabrication & Erection of pipe spools and supports as per isometric & weld map.

Ensure correct size & schedule of pipes are used and rectification / modification is done as per approved procedures.

Ensure correct purging, Cleaning of pipes are done as specified in specification.

Line checking of pipes to ensure pipes, fittings, accessories, supports as per the drawing and specs.

Checking for hydro testing of lines and re-instatement after clearance.

Inspecting for cleaning of spools after hydro testing and before erection in case of flanging connections.

Test packs completion and issuing punch lists and closing punch lists after completion of punch lists.

PERSONAL DETAILS

Age &Marital status : 26, Single [DOB : 8/6/1994]

Languages Known : English, Tamil, Malayalam

Nationality :Indian

Possessing :Indian Driving License

Passport Number :M6360931

Contact this candidate